Average Rating: n/a
$543.72
+ 3 Business Day Shipping $25.35
Specs
| Item | Speed Reducer |
|---|---|
| Type | C-Face |
| Shaft Orientation | Right Angle |
| Duty | Standard |
| Input RPM | 1725 |
| Nominal Output RPM | 29 |
| Worm Center Distance | 2.62" |
| NEMA/IEC Frame | 56C |
| Overhung Load (Lb.) | 1117 |
| Nominal Ratio | 60:1 |
| Max. Input HP | 1/2 |
| Max. Torque (In.-Lbs.) | 537 |
| Output Torque @ 1/4 HP (In.-Lb.) | 241 |
| Output Torque @ 1/3 HP (In.-Lb.) | 336 |
| Output Torque @ 1/2 HP (In.-Lb.) | 537 |
| Number of Stages | 1 |
| Rotation | Forward/Reverse |
| Lubrication | Kluber Food Grade |
| Oil Seal | Double Lip |
| Bearings | Ball |
| Finish | Powdered Epoxy Paint |
| Shaft Assembly | Double Output |
| UNSPSC | 26111503 |
| Weight | 29.000000 |
| SKUs | 6Z128 |
Description
C-Face Right Angle Speed Reducer, Nominal Output Speed 29 RPM, Input RPM 1725-1750, NEMA Frame 56C, Overhung Load 1117 Pounds, Nominal Ratio 60:1, Output Torque @ 1/4 HP 241 Inch Pounds, Output Torque @ 1/3 HP 336 Inch Pounds, Output Torque @ 1/2 HP 537 Inch Pounds, Worm Center Distance 2.63 Inches, Double Output Shaft Assembly
Dayton C-Face Right-Angle Speed Reducers
- For use with 1/4 to 3/4 HP, NEMA 56C, 1725 rpm motors. Case-hardened, ball bearing-supported worm. High-strength bronze, tapered roller bearing-supported output gear. Cast-iron housing. For 1-phase C-Face motors, see page 12; for 3-phase C-Face motors, see page 18.
- 29 to 173 output rpm, continuous duty Double-output shaft Horizontal floor or ceiling mount 2.63" worm center distance Shipped with oil Ball bearings
