Average Rating: n/a
$98.08 + 3 Business Day Shipping $7.12
Specs
| Item | DC Speed Control |
|---|---|
| Shunt Wound Volts | 100/200 |
| HP | 1/50 - 1/3 |
| Voltage Output | 90/180 VDC |
| Input Voltage | 120/240 |
| Enclosure | Chassis |
| Speed Range | 25:1 |
| Speed Regulation | +/- 1% of Base Speed |
| Current/Torque Limit | None |
| Accepts Tach Feedback | No |
| Max. Amps | 2 Amps Continuous |
| Dynamic Braking | No |
| Linear Acceleration | Fixed 0.5 sec. |
| Linear Deceleration | No |
| Acceleration Adjust (Sec.) | Fixed Acceleration (0.5 seconds) |
| Power On Light | No |
| Protection Type | Customer supplied fuse |
| IR Compensation | Adjustable - full range |
| Height (In.) | 4.00 |
| Depth (In.) | 2.00 |
| Width (In.) | 4.90 |
| Operating Temp. | -10 to 40 degrees C Ambient, (15 to 105 F) |
| External Switches | On/Off |
| HP @ Higher Volts | 1/25 to 1/3 |
| HP @ Lower Volts | 1/50 to 1/6 |
| For Use With | 90/180 VDC Motors |
| Includes | Run/Stop Switch, Adj IR Compensation, Built-in Transient and Surge Suppression |
| Agency Compliance | cULus Listed |
| UNSPSC | 39121510 |
| Weight | 0.955000 |
| SKUs | 4Z827 |
Description
Shunt Wound Volts 100/200, 1/50 - 1/3 HP, Voltage Output 90/180 VDC, Input Voltage 120/240, Chassis Enclosure, Speed Range 25:1, Speed Regulation +/- 1 Percent of Base Speed, Current/Torque Limit None, Accepts Tach Feedback No, Max. Amps 2 Amps Continuous, Dynamic Braking No, Linear Acceleration Fixed 0.5 sec., Linear Deceleration No, Power On Light No, Protection Type Customer supplied fuse, IR Compensation Adjustable - full range, Height (In.) 4.00, Depth (In.) 2.00, Width (In.) 4.90
Restrictions
- Note: Not intended for constant-HP applications such as saws and drill presses, or in close proximity to high-capacitive-discharge electrical circuits such as welding equipment.
Dayton
- Adjustable min./max. speed and IR compensation Speed regulation: 1%
- DC Adjustable-Speed Controls
- For permanent magnet or shunt-wound DC motors and gearmotors. Solid-state speed controls convert line voltage input to full-wave DC power on constant- or diminishing-torque applications. 4Z829 and 13A944 include isolated voltage/current follower input with an auto/manual switch.
- Built-in transient and surge suppression
