C-Frame Motor, Motor Type Shaded Pole, Enclosure Open Air-Over, 1/150 HP, Number of Speeds 1, Nameplate RPM 3000, NEMA/IEC Frame Nonstandard, Voltage 115, Frequency 60 Hz, 1 Phase, 1.08 Full Load Amps, Stud/Hole Mounting, Impedance Thermal Protection, Insulation Class B, Service Factor 1.0, Ball Bearings, Ambient Temperature 40 Degrees C, Rotation CWSE, Length Less Shaft 1-11/16 In., Shaft Dia. 3/16 In., Shaft Length 2 In., Stack Size 5/8 In., Stud Quantity 2, Stud Size #8-32
Shaded Pole C-Frame Motors
- Sleeve-bearing models are mechanically reversible by inverting the rotor. For use in small fans and blowers found in bathroom ventilators, range hoods, electric heaters, hair dryers, slide projectors, air cleaners, humidifiers, and refrigeration equipment.
- UL Recognized and CSA Certified.
- Mounting: all-angle Enclosure: open air-over Service factor: 1.0 Insulation: Class B Max. ambient: 40 C
- Mounting: two #8-32 studs at shaft end, and mounting holes on each side of the stator, 1-7/8" OC