Pump, Vertical, 7 1/2 HP, 230/460VZDX 7.5AS 645614
Average Rating: n/a
|NPT Inlet (In.)||2-1/2 F|
|NPT Outlet (In.)||1-1/2 M|
|Max. Head (Ft.)||125|
|Best Efficiency GPM @ Head (Ft.)||120 @ 90|
|Base to Motor Height (In.)||15-7/16|
|Motor Type||3 Phase|
|Max. Dia. Solids (In.)||1/16|
|Max. Liquid Temp. (F)||180|
|Motor Housing||Cast Iron|
|Application||In-Tank/Out of Tank|
|For Use With||Corrosives|
- Corrosion-resistant nonmetallic construction eliminates metal contact with pumped fluids, and related contamination and corrosive reactions. Twin-impeller design minimizes entrained air and maintains a dynamic seal, while the close-coupled design eliminates need for additional couplings and motor alignment. Fume barrier helps keep corrosive vapors from escaping into the atmosphere or damaging motors. Oversized, double-sealed ball bearings. 115V motors are supplied with manual On/Off switch and 7-ft., 3-prong plug. 230V models are bare lead. FNPT volute allows an extended pipe to be connected for complete tank transfers. CPVC pipe and fittings are available on pages 4276, 4277; PVDF (Kynar ) pipe and fittings are available on page 4283. Typically used in chemical processing, tank recirculation/transfer, plating, water/wastewater treatment, and spray cleaning booth applications.
- TEFC, 50/60 Hz, capacitor-start motors Max. liquid temp.: 180 F (CPVC; except 4VYF5 is 160 F); 240 F (PVDF) Max. solids: 1/16"