Average Rating: n/a
$1,429.54 + 3 Business Day Shipping $49.11
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 3/4 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | CBR/CMC |
| Voltage | 440-480 |
| Phase | 3 |
| Amps | 2.1 |
| Height (In.) | 14-1/8 |
| Dia. (In.) | 12-1/2 |
| Cord Length (Ft.) | 25 |
| Discharge NPT (In.) | 3 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 5 Ft. of Head | 148 |
| GPM of Water @ 10 Ft. of Head | 128 |
| GPM of Water @ 15 Ft. of Head | 88 |
| GPM of Water @ 20 Ft. of Head | 71 |
| GPM of Water @ 25 Ft. of Head | 27 |
| Max. Head (Ft.) | 28 |
| Max. Temp. (F) | 140 |
| RPM | 1725 |
| Thermal Protection | None |
| Motor Type | Poly Phase |
| Bearing Type | Ball Bearing |
| Shaft Seal | Carbon/Ceramic |
| Standards | CSA C/US |
| UNSPSC | 40151517 |
| Weight | 65.550000 |
| SKUs | 5YE95 |
Description
Submersible Sewage Pump, 3/4 HP, 1725 RPM, 440-480 Volts, 3 Phase, 2.1 Amps, Cord Length 25 Ft, Thermal Protection None, Discharge Port 3 In, GPM of Water @15 Ft of Head 88, Shut Off 28 Ft, Manual Operation, Body Material Cast Iron, Seal Material Unitized Carbon/Ceramic, Impeller 2 Vane Semi Open, Max Dia Solids 2 In, Max Liquid Temp 140 F, Shaft Material 416 Stainless Steel, Standards CSA C/US
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Liberty
- Quick-disconnect power cord allows easy field service.
- Max. liquid temp.: 140 F
