Average Rating: n/a
$1,094.59
+ 3 Business Day Shipping $60.45
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 1 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | SiC |
| Voltage | 230 |
| Phase | 1 |
| Amps | 13 |
| Height (In.) | 19 |
| Dia. (In.) | 12-1/2 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 2 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 15 Ft. of Head | 158 |
| GPM of Water @ 20 Ft. of Head | 139 |
| GPM of Water @ 25 Ft. of Head | 120 |
| GPM of Water @ 30 Ft. of Head | 101 |
| GPM of Water @ 40 Ft. of Head | 60 |
| Max. Head (Ft.) | 53 |
| Max. Temp. (F) | 140 |
| RPM | 3450 |
| Thermal Protection | Automatic |
| Motor Type | Cap Start |
| Bearing Type | Ball/Ball |
| Shaft Seal | Silicon Carbide |
| Standards | CSA |
| UNSPSC | 40151517 |
| Weight | 83.000000 |
| SKUs | 4NE71 |
Description
Submersible Sewage Pump, HP 1, RPM 3450, 230 Volts 60 Hz, Phase 1, Amps 13, Cord Length 20 Ft, Thermal Protection Automatic, Motor Type Capacitor Start, Discharge Port 2 In, @25 Ft of Head 120, Shut-Off 53 Ft, Operation Manual, Body Material CI, Seal Material Stainless Steel, Buna N, Silicon Carbide, Bearing Type Ball/Ball, Elastomer Buna N, Impeller Cast Iron, Shaft Seal Mechanical Seal, Max Dia Solids 2 In, Height 19 In, Dia 12 1/2 In
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Goulds
- Max. liquid temp.: 140 F
