Average Rating: n/a
$1,506.76 + 3 Business Day Shipping $105.95
Specs
| Item | Watchman Condensate Return System |
|---|---|
| Type | Simplex |
| Tank Material | Cast-Iron |
| Receiver Size (Gal.) | 9 |
| Number of Pumps | 1 |
| EDR Rating | 8,000 |
| Length (In.) | 16-1/2 |
| Width (In.) | 22-3/4 |
| Height (In.) | 12-15/16 |
| Discharge Pressure (PSI) | 21 |
| Pump Flow (GPM) | 12 |
| GPM of Water @ 30 Ft. of Head | 33 |
| GPM of Water @ 35 Ft. of Head | 30 |
| GPM of Water @ 40 Ft. of Head | 26 |
| GPM of Water @ 45 Ft. of Head | 21 |
| GPM of Water @ 50 Ft. of Head | 12 |
| Max. Head (Ft.) | 56 |
| Motor Type | Open Dripproof, Single Phase, Capacitor Start |
| Hz | 60 |
| Seal Type | John Crane Type 6 Buna N/Carbon/Ceramic Shaft |
| Shaft Material | Threaded Stainless Steel |
| RPM | 3540 |
| Switch Type | Normally Open |
| Volute Material | Cast-Iron |
| Impeller Material | Bronze |
| Pump Material | Heavy Duty Cast-Iron |
| HP | 1/3 |
| Voltage | 115/230 |
| Full Load Amps @ 115/230V | 7.2/4.0 |
| Bearings | Permanently Lubricated Ball |
| Mounting | 4-bolt Flange |
| NPT Drain Port (In.) | 1/2 |
| NPT Low Return Inlet (In.) | 2 |
| NPT Overflow Port (In.) | 2 |
| NPT Pump Discharge (In.) | 3/4 |
| NPT Vent Line Port (In.) | 1 1/4 |
| Application | Condensate Transfer for Residential, Commercial and Industrial Steam Heating and Industrial Recessing, Dry Cleaning Plants, Chemical Refineries, Wood Pulp Processing, Textile Mills and Manufacturing Facilities |
| UNSPSC | 40151512 |
| Weight | 153.000000 |
| SKUs | 4RD31 |
Description
Condensate Return Unit, System Type Simplex, Tank Material Cast Iron, Receiver Size 9 Gallons, Pump Capacity 12 GPM, Discharge Pressure 21 PSIG, Number of Pumps 1, EDR Rating 8, 000, Width 16 1/2 Inches, Length 22 3/4 Inches, Height 12 15/16 Inches, Hoffman, Single Phase, 60 Hertz
Boiler Feed Pump System/Condensate Return Systems
- Continuous-duty replacement pumps fit most heating systems. Feature cast-iron volute with bronze impeller and wear ring. Float-operated internal water makeup feeder has 1/2" NPT connection. Water-level gauge with protective brass rods and shutoff valves. Receiver has 2" NPT low return inlet port, 2" NPT vent line port, 2" NPT overflow port, and 1/2" NPT drain port. 4-bolt flange mounting.
- 1/3 HP Max. liquid temp.: 210 F 115/230VAC Motor enclosure: ODP 3/4" NPT discharge port
