Pump, Vertical, 1 HP, 115VZDX 1GS 670052
Average Rating: n/a
|NPT Inlet (In.)||1-1/2 F|
|NPT Outlet (In.)||1-1/4 M|
|Max. Head (Ft.)||48|
|Best Efficiency GPM @ Head (Ft.)||55 @ 37|
|Base to Motor Height (In.)||14-1/8|
|Cord Length (Ft.)||7 with Plug|
|Motor Type||Capacitor Start|
|Max. Dia. Solids (In.)||1/16|
|Max. Liquid Temp. (F)||180|
|Motor Housing||Cast Iron|
|Application||In-Tank/Out of Tank|
|For Use With||Corrosives|
- Corrosion-resistant nonmetallic construction eliminates metal contact with pumped fluids, and related contamination and corrosive reactions. Twin-impeller design minimizes entrained air and maintains a dynamic seal, while the close-coupled design eliminates need for additional couplings and motor alignment. Fume barrier helps keep corrosive vapors from escaping into the atmosphere or damaging motors. Oversized, double-sealed ball bearings. 115V motors are supplied with manual On/Off switch and 7-ft., 3-prong plug. 230V models are bare lead. FNPT volute allows an extended pipe to be connected for complete tank transfers. CPVC pipe and fittings are available on pages 4276, 4277; PVDF (Kynar ) pipe and fittings are available on page 4283. Typically used in chemical processing, tank recirculation/transfer, plating, water/wastewater treatment, and spray cleaning booth applications.
- TEFC, 50/60 Hz, capacitor-start motors Max. liquid temp.: 180 F (CPVC; except 4VYF5 is 160 F); 240 F (PVDF) Max. solids: 1/16"