Average Rating: n/a
$2,230.70 + 3 Business Day Shipping $44.01
Specs
| Item | Pump |
|---|---|
| Type | Vertical |
| HP | 2 |
| Motor Enclosure | TEFC |
| Amps AC | 4.2 |
| Housing | CPVC |
| Volute Material | CPVC |
| Impeller Material | CPVC |
| NPT Inlet (In.) | 1-1/2 F |
| NPT Outlet (In.) | 1-1/4 M |
| Max. Head (Ft.) | 64 |
| Best Efficiency GPM @ Head (Ft.) | 65 @ 48 |
| Base to Motor Height (In.) | 14-1/8 |
| Motor Type | 3 Phase |
| Switch | No |
| Max. Dia. Solids (In.) | 1/16 |
| Max. Liquid Temp. (F) | 180 |
| Motor Housing | Cast Iron |
| Hz | 50/60 |
| Insulation Class | B |
| Voltage | 230/460 |
| RPM | 3450 |
| Phase | 3 |
| Thermal Protection | Yes |
| Duty | Continuous |
| Features | Fume Barrier |
| Application | In-Tank/Out of Tank |
| For Use With | Corrosives |
| UNSPSC | 40151512 |
| Weight | 57.700000 |
| SKUs | 4VYF2 |
Description
Pump, Vertical, 2 HP, Motor Enclosure TEFC, Amps AC 4.2, Housing CPVC, Impeller Material CPVC, NPT Inlet (In.) 1 1/2 F, NPT Outlet (In.) 1 1/4 M, Max. Head 64 Ft., Max. Dia. Solids 1/16 In., Max. Liquid Temp. 180 F, For Use With Corrosives
CPVC and PVDF Vertical Pumps
- Corrosion-resistant nonmetallic construction eliminates metal contact with pumped fluids, and related contamination and corrosive reactions. Twin-impeller design minimizes entrained air and maintains a dynamic seal, while the close-coupled design eliminates need for additional couplings and motor alignment. Fume barrier helps keep corrosive vapors from escaping into the atmosphere or damaging motors. Oversized, double-sealed ball bearings. 115V motors are supplied with manual On/Off switch and 7-ft., 3-prong plug. 230V models are bare lead. FNPT volute allows an extended pipe to be connected for complete tank transfers. CPVC pipe and fittings are available on pages 4276, 4277; PVDF (Kynar ) pipe and fittings are available on page 4283. Typically used in chemical processing, tank recirculation/transfer, plating, water/wastewater treatment, and spray cleaning booth applications.
- TEFC, 50/60 Hz, capacitor-start motors Max. liquid temp.: 180 F (CPVC; except 4VYF5 is 160 F); 240 F (PVDF) Max. solids: 1/16"
