Average Rating: n/a
$254.10 + 3 Business Day Shipping $12.12
Specs
| Item | Magnetic Drive Pump |
|---|---|
| HP | 1/12 |
| Voltage | 115 |
| Full Load Amps | 2.40 |
| Motor Type | SP |
| Motor Enclosure | OPFC |
| GPM @ 1 Ft. of Head | 12.5 |
| GPM of Water @ 3 Ft. of Head | 11.8 |
| GPM of Water @ 6 Ft. of Head | 11 |
| GPM of Water @ 9 Ft. of Head | 10 |
| GPM of Water @ 15 Ft. of Head | 7.1 |
| Max. Head (Ft.) | 21.9 |
| Length (In.) | 10 |
| Width (In.) | 4 |
| Height (In.) | 5 |
| Temp (F) @ 0 PSIG | 150 |
| Temp (F) @ 10 PSIG | 150 |
| Temp (F) @ 20 PSIG | 140 |
| Temp (F) @ 30 PSIG | 140 |
| Housing | Polypropylene |
| Impeller | Polypropylene |
| Max. Specific Gravity | 1.1 |
| Max. Viscosity | 100 SSU |
| Mounting | Horizontal |
| Bearings | Thrust |
| Cord Length | 6 |
| Cord Type | 3-conductor SJP |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Gasket | Buna-N |
| Series | MD-SC |
| For Use With | Semi-Corrosive Chemicals and Solutions |
| Application | For Mild Chemicals at Moderate Temperature, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
| UNSPSC | 40151503 |
| Weight | 8.650000 |
| SKUs | 2P038 |
Description
Magnetic Drive Pump, Power Rating 1/12 HP, Voltage @ 60 Hz 115, Current Rating 2.4 Amps, Outlet 1/2 Inch MPT, Inlet 3/4 Inch FPT, Maximum PSI 9.5, Maximum Head 21.9 Feet, Motor Enclosure OPFC, Maximum Temperature 150 F @ 10 PSI, 70 F @ 30 PSI, Water Flow @ 1 Feet of Head 9.8 GPM, @ 3 Feet of Head 11.8 GPM, @ 6 Feet of Head 11.1 GPM, @ 15 Feet of Head 7.1 GPM, @ 18 Feet of Head 5 GPM, Height 5 Inches, Length 9 Inches, Width 4 Inches
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Magnetic Drive Pumps
- Eliminate seal-caused friction loss, wear, contamination, and leakage. All are nonsubmersible, except 4RL36 can be used submersed or inline. Mount horizontally.
- Max. specific gravity: 1.1 Max. viscosity: 100 SSU
- MD-SC Series For Semicorrosive Chemicals
- Pumps handle mild acids, mild alkalis, and saltwater. Polypropylene pump housing and impeller, nitrile O-ring gasket. Encapsulated ceramic magnet. Ceramic shaft and thrust bearings. Open-fan-cooled motors with 6-ft., 3-conductor SJP cords with 3-prong plugs, except 4RL36 has epoxy-encapsulated motor for submersible use.
More Products
Finish ThompsonPump, Mag-Drive, 1/4 HP, 2.4 Amp, 35 Max FtDB5V-T-M6131364445$668.92 + $17.11 Shipping