Average Rating: n/a
$660.71
+ 3 Business Day Shipping $26.26
Specs
| Item | Submersible Sump Pump, High Temperature |
|---|---|
| Type | Automatic |
| HP | 1/3 |
| Switch Type | Integral |
| Discharge NPT (In.) | 1-1/2 |
| Voltage | 115 |
| Amps | 10.1 |
| Cord Length (Ft.) | 15 |
| Min. Sump Pit Dia. (In.) | 18 |
| On Point (In.) | 10 |
| Off Point (In.) | 2 |
| GPM of Water @ 5 Ft. of Head | 50 |
| GPM of Water @ 10 Ft. of Head | 42 |
| GPM of Water @ 15 Ft. of Head | 27 |
| Max. Head (Ft.) | 20 |
| Height (In.) | 10-7/8 |
| Dia. (In.) | 8-13/16 |
| Max. Dia. Solids (In.) | 1/2 |
| Max. Temp. (F) | 200 |
| Base Material | Ryton |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Nylon |
| Duty | Continuous |
| RPM | 1750 |
| Thermal Protection | Yes |
| Bearing Type | Upper/Lower Sintered Sleeve |
| Shaft Seal | Carbon/Ni-Resist |
| Mechanical Seal | CRB/CMC |
| Motor Type | Shaded Pole |
| Shaft Material | CRS |
| Standards | CSA |
| Warranty | 2 yrs. |
| UNSPSC | 40151512 |
| Weight | 30.400000 |
| SKUs | 5EAF3 |
Description
Submersible Sump Pump, High Temperature, Automatic, 1/3 HP, Integral Switch Type, Discharge NPT 1-1/2 In., Voltage 115, Amps 10.1, Cord Length 15 Ft., On Point 10 In., Off Point 2 In., GPM of Water @ 10 Ft. of Head 42, Max. Head 20 Ft., Max. Dia. Solids 1/2 In., Max. Temp. 200 F, Base Material Ryton, Housing Cast Iron, Impeller Material Nylon, Duty Continuous, RPM 1750, Mechanical Seal CRB/CMC, Shaft Material CRS
Restrictions
- Note: Basin material must be designed for the elevated temps. anticipated. Note: Continuous-duty based on motor NEMA standards. Note: For high-temp. check valves, see page 4107.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
High-Temperature Submersible Pumps
- Use in boiler blow-down pits, plant washdown sump pits, public utility underground transformer vaults, and industrial cleaning sump pits.
- Little Giant
- Epoxy-coated cast-iron housing and 416 stainless steel rotor shaft.
