Average Rating: 5
|Electrical Connections||Terminal Screws|
|For Use With||V8043F Zone Valves|
|Agency Compliance||UL Listed CSA Certified|
|Application||Replacement Head for V Series Zone Valve|
|Used With||Two-way valves; Valves with Action of Spring return to close|
|Frequency||50 Hz; 60 Hz|
|Ambient Temperature Range (F)||125 F Maximum|
|Ambient Temperature Range (C)||52 C Maximum|
|Auxiliary Switch Ratings||4.4 A running @ 120 V; 50 VA pilot duty @ 24 V|
|Electrical Connections (in.)||screw terminal block on same side of manual lever|
|Electrical Connections (mm)||screw terminal block on same side of manual lever|
|Valve Type||Zone Valve|
Motorized 24V Hydronic Zone ValvesManual lever provides valve operation during power failure. Use with 2-wire controls, except 3-wire for 2E164.
Average Product Rating: 5based on 3 reviews
Thrilled. Thanks DrillSpot.comTuesday, February 12, 2013
Exactly what I needed and expected. Fairly priced and arrived in a timely manner. I strongly suggest that you take a GOOD picture or two of the wiring BEFORE beginning the project. An extra hand will be helpful in holding the powerhead while the wires are being reconnected.
Installed in a matter of minutes with no mess at all.
Directions could have been a little larger. Do not think that I would have tried it with out first visiting http://www.doityourself.com. The forum explained everything and answered all of my questions. My old cover had the wiring diagram printed on the inside and wish this one did too.
Honeywell Replacement PowerheadWednesday, October 24, 2012
Exactly as expected.
Arrived as promised, works exactly as the original component.
Two for the price of one and accompanied by an installer at no extra charge.
Happy With ProductTuesday, March 13, 2012
I received this in a short period of time and it was exactly what I needed.
Easy to install; about 10 minutes