Outdoor Sensor, Black
Average Rating: 4.8
|For Use With||4NE58, 4NE59, 4NE60, 6WY18, 6EDZ5 and 6EDZ6|
|Remarks||Max Lead Length 200 Ft|
|Operating Temp. Range (F)||-40 to 120|
|Nominal Sensor Ohms @ 75F||10K|
|Application||Outdoor sensor for VisionPRO and VisionPRO IAQ Thermostats|
|Dimensions (in.)||2 1/4 in. x 3/8 in. with 60 in. leadwires.|
|Dimensions (mm)||57 mm x 10 mm with 1524 mm leadwires.|
|Used With||VisionPRO-? Series Thermostats, VisionPRO-? IAQ Thermostat|
|Mounting||Mounting Clip provided and screws provided.|
|Operating Humidity Range (% RH)||5 to 95% RH, non-condensing|
|Ambient Temperature Range (F)||-40 F to +120 F|
|Ambient Temperature Range (C)||-40 C to +49 C|
Thermostat Sensors and AccessoriesRemote Temperature SensorsElectronic 2-wire sensors use thermistor sensor elements. Mount on wall or 2" x 4" vertical box.
Average Product Rating: 4.8based on 8 reviews
Honeywell C7089U1006 Remote Outdoor Temperature SensorFriday, January 04, 2013
Arrived quickly! Took an hour to solder shielded extension wire on it, and route it to t-stat an connect. Works great, extremely pleased ! Thanks Drill spot! Great price, great service!
Honeywell at reasonable pricesTuesday, December 04, 2012
Not much to say, it is a sensor and it does its job as designed however Drillspot has made the experience painless and thrifty.
Price and rapid delivery by Drillspot.
Perfect as it is.
Outdoor SensorWednesday, September 05, 2012
Works great. I had to adjust it, it was one degree off, other than that had no problems.
Ease of hookup
Great Service, Both TimesTuesday, February 21, 2012
Product was new and in the orignal box. Exactly what I ordered.
It was an exact match for the application
Freight charge seemeds little high
Check Application Compatability Before PurchasingSaturday, February 04, 2012
I bought this sensor so I could lockout the auxilliary heating stage of a geothermal heat pump. According to Honeywell's literature the sensor would allow me to configure the HZ432 zone control system to select an outdoor temperature to lock out the 2nd or 3rd stage. Unfortuanetly, it locks out both stages. Honeywell tech support confirmed this but has not updated their installation manuals. So if you plan on using this with any Honeywell wireless thermostats check with tech support prior to purchasing. This is not a DrillSpot issue.
It should work with Honeywell wireless thermostats as stated in their literature
Great SensorFriday, December 09, 2011
Sensor installed easily and works great. Matched up with the Honeywell IAQ and my present HVAC system. DrillSpot has the best price on the net.
Temp readout on the thermostat
Sensor leads should be more like 15' to 20' and not just 5'
Temperature SensorTuesday, June 07, 2011
This is a great product. The instructions were great and the sensor worked right out of the box!
Works as advertised
Honeywell Temperature SensorMonday, February 07, 2011
DrillSpot had the right part for my thermostat and works just as advertised. Thanks for the quick service.