|Electrical Connections||30" Wiring Harness With Stud Terminal And 1/4" Quick-Connect Terminal|
|Insulator Mounting Locator||No|
|Electrical Ratings||24 Vac|
|Inlet/Outlet (In.)||1/2 x 1/2|
|Method of Opening||Standard|
|Prepurge Time (Sec.)||0 or 30 Seconds|
|Pressure Setting Range (In. WC)||3.5|
|Lockout Time (Sec.)||15 Or 90|
|Operation Description||Convert Conventional Standing Pilot Systems To Intermittent Pilot Systems, After Trial For Ignition, Pilot Gas Shuts Off For 5 Minutes, Then Another Trial For Pilot Ignition Takes Place|
|For Use With||Residential, Commercial Heating Equipment|
|Includes||VR8204A2142 valve (1/2 x 1/2; 3.5" WC setting; 150 kBtu/hr at 1" p.d.)|
|Dimensions (in.)||3 15/16 in. high x 5 7/16 in. wide x 2 5/8 in. deep|
|Dimensions (mm)||100 mm high x 138 mm wide x 67 mm deep|
|Flame Failure Response Time (sec)||2.0 sec|
|PrePurge||0 or 30 seconds|
|Ambient Temperature Range (F)||-40 F to +165 F|
|Ambient Temperature Range (C)||-40 C to +74 C|
|Ignition System Type||Intermittent Pilot|
Intermittent Pilot Ignition Systems and Conversion KitsConvert conventional standing pilot systems to intermittent pilot systems. 4E397 has 60-sec. max. lockout time, and shutoff is 100% after 3 trials for ignition. 4E396 has no max. lockout time with continuous trial for ignition and is not 100% shutoff. 1TGE4 is 100% shutoff with 90-sec. max. ignition trial; continuous retry. 2RNY1 and 2RNY2 have 100% shutoff after ignition trial; continuous retry after 5-min. purge.
Average Product Rating: 5based on 2 reviews
Drillspot Rocks!Wednesday, December 12, 2012
I needed this pilot conversion kit to replace one that was already in my furnace. Aside from a few slight design changes, it went in after a false start or two and is now working like a champ!
The fact that it was essentially a direct replacement for what I already had.
I cannot think of a thing.
Fast deliveryThursday, December 02, 2010
Just what we ordered. Did the job and arrived quickly. Would buy from this dealer again.