Average Rating: n/a
$2,309.85 + 3 Business Day Shipping $58.50
Specs
| Item | Grinder Pump |
|---|---|
| HP | 2 |
| Voltage | 208/230 |
| Amps | 15 |
| Height (In.) | 18.5 |
| Dia. (In.) | 11.125 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 1-1/4 |
| Shaft Seal | Stainless Steel, Buna N, Silicon Carbide |
| Off Point (In.) | 6-1/2 |
| On Point (In.) | 18 |
| GPM of Water @ 5 Ft. of Head | 42 |
| GPM of Water @ 20 Ft. of Head | 41 |
| GPM of Water @ 50 Ft. of Head | 38 |
| GPM of Water @ 70 Ft. of Head | 30 |
| GPM of Water @ 80 Ft. of Head | 24 |
| Max. Head (Ft.) | 101 |
| Max. Temp. (F) | 104 |
| Phase | 1 |
| Max. Dia. Solids (In.) | 3 |
| RPM | 3450 |
| Motor Type | Cap Start |
| Bearing Type | Ball/Ball |
| Impeller Material | Bronze |
| Base Material | Cast Iron |
| GPM of Water @ 10 Ft. of Head | 42 |
| GPM of Water @ 15 Ft. of Head | 41 |
| GPM of Water @ 25 Ft. of Head | 41 |
| GPM of Water @ 30 Ft. of Head | 41 |
| GPM of Water @ 40 Ft. of Head | 39 |
| GPM of Water @ 60 Ft. of Head | 35 |
| GPM of Water @ 90 Ft. of Head | 15 |
| Shaft Material | SS |
| Thermal Protection | Automatic |
| Standards | CSA |
| UNSPSC | 40151513 |
| Weight | 80.000000 |
| SKUs | 4NE67 |
Description
Submersible Grinder Pump, HP 2, RPM 3450, 208/230 Volts 60 Hz, Phase 1, Amps 15, Cord Length 20 Ft, Thermal Protection Automatic, Motor Type Cap Torxt, Discharge Port 1 1/4 In, GPM @5 Feet of Head 42, @25 Ft of Head 41, @55 Ft of Head 36, Shut-Off 101 Ft, Operation Manual, Body Material CI, Seal Material Stainless Steel, Buna N, Silicon Carbide, Bearing Type Ball/Ball, Elastomer Buna N, Impeller Bronze, Shaft Seal Mechanical Seal, Max Dia Solids 3 In, Height 18 1/2 In, Dia 11 1/8 In
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Grinder Pumps and Pump Systems
- Grinder Pumps
- 1-1/4" NPT outlets, except 12T645 to 12T652 are 1-3/4", 10V136 and 10V137 are 2"
