Average Rating: n/a
$360.04 + 3 Business Day Shipping $30.55
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Automatic |
| HP | 4/10 |
| Switch Type | Tether |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Impeller Material | Nylon |
| Shaft Material | CBR/CMC |
| Voltage | 115 |
| Phase | 1 |
| Amps | 9 |
| Height (In.) | 11-19/32 |
| Dia. (In.) | 10-19/64 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 2 |
| Max. Dia. Solids (In.) | 2 |
| On Point (In.) | 9 to 14 |
| Off Point (In.) | 2 to 6 |
| GPM of Water @ 5 Ft. of Head | 110 |
| GPM of Water @ 10 Ft. of Head | 75 |
| GPM of Water @ 15 Ft. of Head | 30 |
| Max. Head (Ft.) | 20 |
| Max. Temp. (F) | 140 |
| RPM | 1750 |
| Thermal Protection | Automatic |
| Motor Type | PSC |
| Bearing Type | Ball |
| Shaft Seal | Carbon/Ceramic |
| Warranty | 2 yrs. |
| UNSPSC | 40151517 |
| Weight | 37.000000 |
| SKUs | 4NY90 |
Description
Submersible Sewage Pump, HP 4/10, RPM 1750, 115 Volts 60 Hz, Phase 1, Amps 9.0, Cord Length 20 Ft, Thermal Protection Automatic, Motor Type Permanent Split Capacitor, Discharge Port 2 In, Off Point 2-6 In, On Point 9-14 In, GPM @5 Feet of Head 110, Max Head 20 Ft, Operation Auto, Body Material CI, Seal Material SS, Nitrile Gaskets, Carbon/Ceramic, Bearing Type Ball, Elastomer Nitrile, Impeller Nylon, Shaft Seal Mechanical, Switch Type Tether, Max Dia Solids 2 In, Height 11.6 In, Dia 10.3 In
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Little Giant
- Max. liquid temp.: 140 F
