Average Rating: n/a
$845.08 + 3 Business Day Shipping $56.65
Specs
| Item | Effluent Pump, Submersible |
|---|---|
| Type | Manual Operation (Switch Not Included) |
| HP | 1/2 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Mechanical Seal | SiC/Buna |
| Impeller Material | Polypropylene |
| Voltage | 230 |
| Amps | 5.1 |
| Height (In.) | 16-3/4 |
| Dia. (In.) | 12-3/16 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 2 |
| Shaft Seal | Silicon Carbide/Buna N |
| Max. Dia. Solids (In.) | 3/4 |
| GPM of Water @ 5 Ft. of Head | 79 |
| GPM of Water @ 10 Ft. of Head | 76 |
| GPM of Water @ 20 Ft. of Head | 66 |
| GPM of Water @ 40 Ft. of Head | 47 |
| Max. Head (Ft.) | 79 |
| GPM of Water @ 15 Ft. of Head | 70 |
| GPM of Water @ 25 Ft. of Head | 61 |
| GPM of Water @ 30 Ft. of Head | 56 |
| GPM of Water @ 50 Ft. of Head | 36 |
| GPM of Water @ 60 Ft. of Head | 25 |
| GPM of Water @ 70 Ft. of Head | 13 |
| Max. Temp. (F) | 104 |
| Phase | 1 |
| RPM | 3450 |
| Duty | Intermittent |
| Motor Type | Oil Filled PSC |
| Bearing Type | Ball |
| UNSPSC | 40151512 |
| Weight | 77.150000 |
| SKUs | 4HU76 |
Description
Effluent Pump, Submersible, 1/2 HP, Housing Cast Iron, Impeller Material Polypropylene, 230 Voltage, 5.1 Amps, Height 16 3/4 In., Dia. 12 3/16 In., Cord Length 20 Ft., Discharge NPT 2 In., Max. Dia. Solids 3/4 In., Max. Head 79 Ft., GPM of Water @ 50 Ft. of Head 36, Max. Temp. 104 F, Phase 1, Intermittent Duty
Submersible Effluent Pumps
- Handle solids from 3/4" to 1-1/2" For float switches, see page 4049. For control panels, see page 4048.
- Dayton
- Pumps are powered by permanent split capacitor (PSC) motors. With stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Automatic units have a piggyback switch.
- Max. temp.: 104 F (2JGA2, 2JGA3, and 4HDZ8 are 130 F; 4HU70 is 77 F)
