Average Rating: n/a
$508.20 + 3 Business Day Shipping $36.89
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Automatic |
| HP | 1/2 |
| Switch Type | Vertical |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Polypropylene |
| Shaft Material | CBR/CMC |
| Voltage | 115 |
| Phase | 1 |
| Amps | 10.4 |
| Height (In.) | 14-1/4 |
| Dia. (In.) | 12-1/2 |
| Cord Length (Ft.) | 10 |
| Discharge NPT (In.) | 2 |
| Max. Dia. Solids (In.) | 2 |
| On Point (In.) | 12 |
| Off Point (In.) | 4 |
| GPM of Water @ 5 Ft. of Head | 128 |
| GPM of Water @ 10 Ft. of Head | 89 |
| GPM of Water @ 15 Ft. of Head | 50 |
| GPM of Water @ 20 Ft. of Head | 10 |
| Max. Head (Ft.) | 21 |
| Max. Temp. (F) | 130 |
| RPM | 1725 |
| Thermal Protection | Automatic Reset |
| Motor Type | Hermetically-sealed, Oil-filled |
| Shaft Seal | Carbon/Ceramic |
| Warranty | 1 yr. |
| UNSPSC | 40151517 |
| Weight | 46.750000 |
| SKUs | 2P552 |
Description
Submersible Sewage Pump, Power Rating 1/2 HP, Voltage @ 60 Hz 115 Volts, Phase Single, Speed 1725 RPM, Current Rating 10.4 Amps, Discharge NPT 2 Inches, Cord Length 10 Feet, Impeller Polypropylene, Off Point 4 Inches, On Point 12 Inches, Shut Off 21.5 Feet, Water Flow @ 5 Feet of Head 128 GPM, Water Flow @ 10 Feet of Head 89 GPM, Water Flow @ 15 Feet of Head 50 GPM, Water Flow @ 20 Feet of Head 10 GPM, Height 14 1/4 Inches
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Zoeller
- For replacement parts, see page 4044.
- Max. liquid temp.: 130 F
