Hot Water Circulator Pump, 1/25 HP
Average Rating: 5
|Housing Material||Cast Iron|
|Face to Face Dimension (In.)||6-3/8|
|Max. Temp. (F)||240|
|Max. Working Pressure (PSI)||125|
|GPM of Water @ 1 Ft. of Head||21|
|GPM of Water @ 2 Ft. of Head||19.5|
|GPM of Water @ 3 Ft. of Head||18|
|GPM of Water @ 4 Ft. of Head||16|
|GPM of Water @ 5 Ft. of Head||14|
|GPM of Water @ 6 Ft. of Head||12|
|GPM of Water @ 7 Ft. of Head||10|
|GPM of Water @ 8 Ft. of Head||7|
|GPM of Water @ 9 Ft. of Head||4|
|Max. GPM @ Head (Ft.)||21 @ 1|
|Best Efficiency GPM @ Head (Ft.)||12 @ 7|
|Min. GPM @ Head (Ft.)||4 @ 9|
|Construction||30 Percentage Glass-filled Polyether Sulfone|
|Manufacturers Warranty Length||3 years|
- Hot Water Circulating Pumps
- Not for use in potable water systems.
- Maintenance-free in-line pumps are made for hydronic heating, domestic hot water recirculation, solar thermal heating, and heat recovery systems. 2400 Series has a 1/2" carbon/silicon-carbide mechanical seal, permanently lubricated ball bearings with 1/2" stainless steel shaft. Wet rotor. 00 Series has a replaceable cartridge that contains all moving parts and the motor is impedance-protected.
Average Product Rating: 5based on 1 reviews
Good nights sleep nowTuesday, February 15, 2011
All I hoped for in less noise than my other brand pump! So glad I make the switch.
Does the same job with a lot less noise
If it was advertised more I could have bought it years ago.