Average Rating: n/a
$1,813.71 + 3 Business Day Shipping $76.70
Specs
| Item | Watchman Condensate Return System |
|---|---|
| Type | Simplex |
| Tank Material | Welded Steel |
| Receiver Size (Gal.) | 14 |
| Number of Pumps | 1 |
| EDR Rating | 12,000 |
| Length (In.) | 22-1/2 |
| Width (In.) | 23-7/8 |
| Height (In.) | 12-15/16 |
| Discharge Pressure (PSI) | 20 |
| Pump Flow (GPM) | 18 |
| GPM of Water @ 30 Ft. of Head | 33 |
| GPM of Water @ 35 Ft. of Head | 30 |
| GPM of Water @ 40 Ft. of Head | 26 |
| GPM of Water @ 45 Ft. of Head | 21 |
| GPM of Water @ 50 Ft. of Head | 12 |
| Max. Head (Ft.) | 56 |
| Motor Type | Open Dripproof, Single Phase, Capacitor Start |
| Hz | 60 |
| Seal Type | John Crane Type 6 Buna N/Carbon/Ceramic Shaft |
| Shaft Material | Threaded Stainless Steel |
| RPM | 3540 |
| Switch Type | Normally Open |
| Volute Material | Cast-Iron |
| Impeller Material | Bronze |
| Pump Material | Heavy Duty Cast-Iron |
| HP | 1/3 |
| Voltage | 115/230 |
| Full Load Amps @ 115/230V | 7.2/4.0 |
| Bearings | Permanently Lubricated Ball |
| Mounting | 4-bolt Flange |
| NPT Drain Port (In.) | 1/2 |
| NPT Low Return Inlet (In.) | 2 |
| NPT Overflow Port (In.) | 2 |
| NPT Pump Discharge (In.) | 3/4 |
| NPT Vent Line Port (In.) | 1 1/4 |
| Application | Condensate Transfer for Residential, Commercial and Industrial Steam Heating and Industrial Recessing, Dry Cleaning Plants, Chemical Refineries, Wood Pulp Processing, Textile Mills and Manufacturing Facilities |
| UNSPSC | 40151512 |
| Weight | 108.000000 |
| SKUs | 4RD29 |
Description
Condensate Return Unit, System Type Simplex, Voltage Rating 115 Volts, Tank Material Welded Steel, Receiver Size 14 Gallons, Pump Capacity 18 GPM, Discharge Pressure 20 PSIG, Number of Pumps 1, EDR Rating 12, 000, Width 15 Inches, Length 22 7/8 Inches, Height 12 15/16 Inches, Single Phase, 60 Hertz, Hoffman
Boiler Feed Pump System/Condensate Return Systems
- Continuous-duty replacement pumps fit most heating systems. Feature cast-iron volute with bronze impeller and wear ring. Float-operated internal water makeup feeder has 1/2" NPT connection. Water-level gauge with protective brass rods and shutoff valves. Receiver has 2" NPT low return inlet port, 2" NPT vent line port, 2" NPT overflow port, and 1/2" NPT drain port. 4-bolt flange mounting.
- 1/3 HP Max. liquid temp.: 210 F 115/230VAC Motor enclosure: ODP 3/4" NPT discharge port
