Average Rating: n/a
$1,146.72
+ 3 Business Day Shipping $32.70
Specs
| Item | Pump |
|---|---|
| Type | Magnetic Drive |
| HP | 3/4 |
| Voltage | 115/230 |
| Full Load Amps | 11.80/5.90 |
| Inlet | 1-1/2 FNPT |
| Outlet | 1 MNPT |
| Motor Type | PSC |
| Motor Enclosure | TEFC |
| GPM @ 1 Ft. of Head | 53.0 |
| GPM of Water @ 3 Ft. of Head | 51.0 |
| GPM of Water @ 6 Ft. of Head | 48.8 |
| GPM of Water @ 9 Ft. of Head | 46.5 |
| GPM of Water @ 15 Ft. of Head | 45.0 |
| GPM of Water @ 18 Ft. of Head | 43.0 |
| GPM of Water @ 24 Ft. of Head | 40.0 |
| GPM of Water @ 40 Ft. of Head | 30.8 |
| GPM of Water @ 50 Ft. of Head | 21.7 |
| Max. Head (Ft.) | 58.9 |
| Length (In.) | 17-1/4 |
| Width (In.) | 8 |
| Height (In.) | 8-1/4 |
| Temp (F) @ 0 PSIG | 200 |
| Temp (F) @ 10 PSIG | 200 |
| Temp (F) @ 20 PSIG | 200 |
| Temp (F) @ 30 PSIG | 200 |
| Operating Pressure (PSI) | 25.5 |
| Housing | PPS |
| Impeller | PPS |
| Max. Specific Gravity | 1.1 |
| Max. Viscosity | 100 SSU |
| Mounting | Horizontal |
| Bearings | Thrust |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Gasket | FKM |
| Series | MD-HC |
| For Use With | Highly Corrosive Chemicals |
| Application | For Highly Corrosive Chemicals, Eliminates Seal-caused Friction Loss, Wear, Contamination and Leakage |
| UNSPSC | 40151503 |
| Weight | 40.300000 |
| SKUs | 2P044 |
Description
Magnetic Drive Pump, Flow @ Total Head 53 GPM, Power Rating 3/4 HP, Current Rating 11.8 Amps, Voltage @ 60 Hz 115/230 Volts, Outlet 1 MNPT Inch, Inlet 1-1/2 FNPT Inches, Maximum Pressure 40 PSI, Pressure 25.5 PSI, Operating Pressure @ Maximum Temperature 40 PSI, Maximum Head 58.9 Feet, Motor Enclosure TEFC, Motor PSC, Maximum Temperature 200 Degrees Fahrenheit, Operating Temperature @ Maximum Pressure 150 Degrees Fahrenheit, Water Flow @ 15 Feet of Head 45 GPM
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Magnetic Drive Pumps
- Eliminate seal-caused friction loss, wear, contamination, and leakage. All are nonsubmersible, except 4RL36 can be used submersed or inline. Mount horizontally.
- Max. specific gravity: 1.1 Max. viscosity: 100 SSU
- MD-HC Series For Highly Corrosive Chemicals
- Pumps handle liquids such as photographic and plating solutions, acids, alkalis, brines, and distilled water. Ryton pump housing and impeller, Viton O-ring gasket, and encapsulated ceramic magnet. Motors have 6-ft., 3-conductor SJO cords with 3-prong plugs, except 4RL34, 4RL35, and 2P044 must be field-wired.
