Pump, Effluent, 2 HP4LE13 74044
Average Rating: n/a
|Item||Effluent Pump, Submersible|
|Type||Manual Operation (Switch Not Included)|
|Base Material||Cast Iron|
|Top Material||Cast Iron|
|Cord Length (Ft.)||20|
|Discharge NPT (In.)||2|
|Shaft Seal||Silicon Carbide|
|Max. Dia. Solids (In.)||3/4|
|GPM of Water @ 40 Ft. of Head||100|
|Max. Head (Ft.)||86|
|GPM of Water @ 50 Ft. of Head||80|
|GPM of Water @ 60 Ft. of Head||62|
|GPM of Water @ 70 Ft. of Head||32|
|GPM of Water @ 80 Ft. of Head||10|
|Max. Temp. (F)||104|
|Motor Type||3 Phase|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
- Handle solids from 3/4" to 1-1/2" For float switches, see page 4049. For control panels, see page 4048.
- Pumps are powered by permanent split capacitor (PSC) motors. With stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Automatic units have a piggyback switch.
- Max. temp.: 104 F (2JGA2, 2JGA3, and 4HDZ8 are 130 F; 4HU70 is 77 F)