Pump, Effluent, 1/2 HP4HU71 74769
Average Rating: n/a
|Item||Effluent Pump, Submersible|
|Type||Manual Operation (Switch Not Included)|
|Top Material||Cast Iron|
|Impeller Material||Cast Iron|
|Cord Length (Ft.)||20|
|Discharge NPT (In.)||1-1/2|
|Shaft Seal||Silicon Carbide/Buna N|
|Max. Dia. Solids (In.)||3/4|
|GPM of Water @ 5 Ft. of Head||90|
|GPM of Water @ 10 Ft. of Head||78|
|GPM of Water @ 20 Ft. of Head||52|
|Max. Head (Ft.)||31|
|GPM of Water @ 15 Ft. of Head||65|
|GPM of Water @ 25 Ft. of Head||35|
|GPM of Water @ 30 Ft. of Head||10|
|Max. Temp. (F)||104|
|Motor Type||Oil Filled PSC|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
- Handle solids from 3/4" to 1-1/2" For float switches, see page 4049. For control panels, see page 4048.
- Pumps are powered by permanent split capacitor (PSC) motors. With stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Automatic units have a piggyback switch.
- Max. temp.: 104 F (2JGA2, 2JGA3, and 4HDZ8 are 130 F; 4HU70 is 77 F)