Average Rating: n/a
$399.13 + 3 Business Day Shipping $36.37
Specs
| Item | Effluent Pump, Submersible |
|---|---|
| Type | Manual Operation (Switch Not Included) |
| HP | 1/2 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Mechanical Seal | SiC/Buna |
| Impeller Material | Cast Iron |
| Voltage | 115 |
| Amps | 6.4 |
| Height (In.) | 14-1/16 |
| Dia. (In.) | 9-5/8 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 2 |
| Shaft Seal | Silicon Carbide/Buna N |
| Max. Dia. Solids (In.) | 3/4 |
| GPM of Water @ 5 Ft. of Head | 48 |
| GPM of Water @ 10 Ft. of Head | 45 |
| GPM of Water @ 20 Ft. of Head | 37 |
| GPM of Water @ 40 Ft. of Head | 10 |
| Max. Head (Ft.) | 45 |
| GPM of Water @ 15 Ft. of Head | 42 |
| GPM of Water @ 25 Ft. of Head | 32 |
| GPM of Water @ 30 Ft. of Head | 26 |
| Max. Temp. (F) | 77 |
| Phase | 1 |
| RPM | 3450 |
| Duty | Intermittent |
| Motor Type | Oil Filled PSC |
| Bearing Type | Ball |
| UNSPSC | 40151512 |
| Weight | 45.950000 |
| SKUs | 4HU70 |
Description
Effluent Pump, Submersible, 1/2 HP, Housing Cast Iron, Impeller Material Cast Iron, 115 Voltage, 6.4 Amps, Height 14 1/16 In., Dia. 9 5/8 In., Cord Length 20 Ft., Discharge NPT 2 In., Max. Dia. Solids 3/4 In., Max. Head 45 Ft., Max. Temp. 77 F, Phase 1, Intermittent Duty
Submersible Effluent Pumps
- Handle solids from 3/4" to 1-1/2" For float switches, see page 4049. For control panels, see page 4048.
- Dayton
- Pumps are powered by permanent split capacitor (PSC) motors. With stainless steel shafts and hardware, long-life mechanical seals, and ball bearings. Automatic units have a piggyback switch.
- Max. temp.: 104 F (2JGA2, 2JGA3, and 4HDZ8 are 130 F; 4HU70 is 77 F)
