Average Rating: n/a
$3,758.68
+ 3 Business Day Shipping $139.75
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 5 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | SiC |
| Voltage | 230 |
| Phase | 1 |
| Amps | 26.5 |
| Height (In.) | 27 |
| Dia. (In.) | 15-1/2 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 3" ANSI Flange |
| Max. Dia. Solids (In.) | 2-1/2 |
| GPM of Water @ 15 Ft. of Head | 470 |
| GPM of Water @ 20 Ft. of Head | 435 |
| GPM of Water @ 25 Ft. of Head | 400 |
| GPM of Water @ 30 Ft. of Head | 360 |
| GPM of Water @ 40 Ft. of Head | 280 |
| GPM of Water @ 50 Ft. of Head | 170 |
| GPM of Water @ 60 Ft. of Head | 60 |
| Max. Head (Ft.) | 64 |
| Max. Temp. (F) | 140 |
| RPM | 1750 |
| Thermal Protection | None |
| Motor Type | Cap Start |
| Bearing Type | Ball/Ball |
| Shaft Seal | Silicon Carbide |
| Standards | CSA |
| UNSPSC | 40151517 |
| Weight | 205.000000 |
| SKUs | 4NE76 |
Description
Sewage Pump, Submersible, 5 HP, RPM 1750, 230 Volts, Phase 1, Amps 26.5, Cord Length 20 Ft, Thermal Protection Starter Required, Discharge 3" ANSI, Flange Not Included, GPM of Water@15 Ft of Head 470, @55 Ft of Head 115, Shut-Off 64 Ft, Body Material Cast Iron, Seal Material Stainless Steel, Buna N, Silicon Carbide, Bearing Type Ball/Ball, Elastomer Buna N, Impeller Cast Iron, Shaft Seal Mechanical Seal, Height 27 In, Dia 15 1/2 In, Width 12 In, Max Dia Solids 3 In
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Goulds
- Max. liquid temp.: 140 F
