Average Rating: n/a
$1,044.40 + 3 Business Day Shipping $66.56
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 1-1/2 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Top Material | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | SiC |
| Voltage | 230 |
| Phase | 1 |
| Amps | 13.5 |
| Height (In.) | 19-1/16 |
| Dia. (In.) | 12-5/8 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 2 |
| Max. Dia. Solids (In.) | 2 |
| GPM of Water @ 20 Ft. of Head | 145 |
| GPM of Water @ 25 Ft. of Head | 135 |
| GPM of Water @ 30 Ft. of Head | 125 |
| GPM of Water @ 40 Ft. of Head | 100 |
| GPM of Water @ 50 Ft. of Head | 70 |
| GPM of Water @ 60 Ft. of Head | 35 |
| Max. Head (Ft.) | 66 |
| Max. Temp. (F) | 104 |
| RPM | 3450 |
| Thermal Protection | Automatic |
| Motor Type | Hermetically Sealed/Oil Filled |
| Bearing Type | Dual Ball |
| Shaft Seal | Silicon Carbide |
| Standards | CSA |
| UNSPSC | 40151517 |
| Weight | 92.400000 |
| SKUs | 4HU85 |
Description
Submersible Sewage Pump, 1 1/2 HP, Base Material Cast Iron, Housing Cast Iron, Top Material Cast Iron, Impeller Material Cast Iron, Phase 1, 230 Voltage, 13.5 Amps, Height 19 1/16 In., Dia. 12 5/8 In., Cord Length 20 Ft., Discharge NPT 2 In., Max. Dia. Solids 2 In., GPM of Water @ 50 Ft. of Head 70, Max. Head 66 Ft., Max. Temp. 104 F, Thermal Protection Automatic, Standards CSA
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Dayton
- Max. liquid temp.: 104 F for cast-iron (4HU79, 3BB87, and 4LE12 are 77 F); 130 F for stainless steel)
