Pump, Magnetic Drive
Average Rating: n/a
|Full Load Amps||0.94|
|GPM @ 1 Ft. of Head||5.8|
|GPM of Water @ 3 Ft. of Head||5.0|
|GPM of Water @ 6 Ft. of Head||3.3|
|Max. Head (Ft.)||7|
|Temp (F) @ 0 PSIG||150|
|Temp (F) @ 10 PSIG||150|
|Temp (F) @ 20 PSIG||140|
|Temp (F) @ 30 PSIG||140|
|Operating Pressure (PSI)||3.0|
|Impeller||Glass Filled Polypropylene|
|Max. Specific Gravity||1.1|
|Max. Viscosity||100 SSU|
|Cord Length||3 ft. With No Plug|
|Cord Type||3-conductor SJO|
|Design||Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level|
|For Use With||Mildly Corrosive Chemicals|
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
- Magnetic Drive Pumps
- Pumps handle mild acids and alkalis such as photographic and plating solutions. Glass-filled polypropylene pump housing and impeller. Nitrile O-ring gasket. 3-ft., 3-conductor SJO cord. 2P875 has epoxy-encapsulated motor for submersible use.
- Eliminate seal-caused friction loss, wear, contamination, and leakage. All are nonsubmersible, except 4RL36 can be used submersed or inline. Mount horizontally.
- Max. specific gravity: 1.1 Max. viscosity: 100 SSU