|Item||Tap and Die Set|
|Material||High Speed Steel|
|Number of Pieces||22|
|Sizes||4-40, 4-48, 6-32, 6-40, 8-32, 8-36, 10-32, 10-24, 12-24, 12-18|
|Size/Range||4-40 to 12-24|
|Thread Type||NC, NF|
|Tap Wrench Number||329|
|Includes||Tap, Die and Collet for Each Size, Steel Case w/Foam Liner|
- Tap and Die Sets
- Die is in 2 pieces; each half has 2 cutting edges which are easy to sharpen and permit an unusually wide range of adjustment. The 2 die halves fit into a beveled collet cap. Simply tightening the guide makes the entire assembly a solid rigid die. Yet, it can easily be taken apart, the dies sharpened, and then quickly reassembled. Set contains 1 tap, 1 die, and 1 collet for each cutting size listed.
- Tap, Die, and Drill Set
- Furnished with American National Form Threads, National Coarse, National Fine Threads, and adjustable dies. 2 screws in the sides of the stock provide contracting pressure while a third screw engages the split in the die to provide expanding pressure. Packed in solid steel case with an Ethafoam moisture- and oil-resistant liner for protection.