Average Rating: n/a
$106.66 + 3 Business Day Shipping $7.90
Specs
| Item | Magnetic Drive Pump |
|---|---|
| HP | 1/200 |
| Voltage | 115 |
| Full Load Amps | 0.40 |
| Motor Type | SP |
| Motor Enclosure | Open |
| GPM @ 1 Ft. of Head | 2.8 |
| GPM of Water @ 3 Ft. of Head | 2.1 |
| Max. Head (Ft.) | 5.5 |
| Length (In.) | 5 |
| Width (In.) | 2-1/2 |
| Height (In.) | 3-3/4 |
| Temp (F) @ 0 PSIG | 150 |
| Temp (F) @ 10 PSIG | 120 |
| Temp (F) @ 20 PSIG | 90 |
| Temp (F) @ 30 PSIG | 70 |
| Impeller | Glass Filled Polypropylene |
| Max. Specific Gravity | 1.1 |
| Max. Viscosity | 100 SSU |
| Mounting | Horizontal |
| Cord Length | 3 |
| Cord Type | Stripped Leads |
| Design | Gravity-feed, Requires the Pump Inlet to be Lower than Liquid Level |
| Gasket | Buna-N |
| Series | MD |
| For Use With | Mildly Corrosive Chemicals |
| Application | For Photographic and Plating Solutions, Mild Acids, Mild Alkalis and Other Nonflammable Liquids Compatible with Pump Component Materials, Eliminates Seal-Caused Friction Loss, Wear, Contamination and Leakage |
| UNSPSC | 40151503 |
| Weight | 2.150000 |
| SKUs | 2P037 |
Description
Magnetic Drive Pump, Power Rating 1/200 HP, Voltage @ 60 Hz 115, Current Rating 0.4 Amp, Outlet 1/2 Inch OD, Inlet 1/2 Inch OD, Maximum PSI 30, Maximum Head 5.5 Feet, Motor Enclosure Open, Maximum Temperature 150 F @ 10 PSI, 70 F @ 30 PSI, Water Flow @ 1 Feet of Head 2.8 GPM, @ 3 Feet of Head 2.1 GPM, Height 3 3/4 Inches, Length 4 1/2 Inches, Width 2 1/2 Inches
Restrictions
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
MD Series For Mildly Corrosive Chemicals
- Magnetic Drive Pumps
- Pumps handle mild acids and alkalis such as photographic and plating solutions. Glass-filled polypropylene pump housing and impeller. Nitrile O-ring gasket. 3-ft., 3-conductor SJO cord. 2P875 has epoxy-encapsulated motor for submersible use.
- Eliminate seal-caused friction loss, wear, contamination, and leakage. All are nonsubmersible, except 4RL36 can be used submersed or inline. Mount horizontally.
- Max. specific gravity: 1.1 Max. viscosity: 100 SSU
