Average Rating: n/a
$3,099.42
+ 3 Business Day Shipping $132.60
Specs
| Item | Submersible Sewage Pump |
|---|---|
| Type | Manual |
| HP | 3 |
| Base Material | Cast Iron |
| Housing | Cast Iron |
| Impeller Material | Cast Iron |
| Shaft Material | SiC |
| Voltage | 460 |
| Phase | 3 |
| Amps | 6 |
| Height (In.) | 27 |
| Dia. (In.) | 15-1/2 |
| Cord Length (Ft.) | 20 |
| Discharge NPT (In.) | 3" ANSI Flange |
| Max. Dia. Solids (In.) | 2-1/2 |
| GPM of Water @ 15 Ft. of Head | 390 |
| GPM of Water @ 20 Ft. of Head | 350 |
| GPM of Water @ 25 Ft. of Head | 310 |
| GPM of Water @ 30 Ft. of Head | 265 |
| GPM of Water @ 40 Ft. of Head | 160 |
| Max. Head (Ft.) | 54 |
| Max. Temp. (F) | 140 |
| RPM | 1750 |
| Thermal Protection | None |
| Motor Type | 3-Phase |
| Bearing Type | Ball/Ball |
| Shaft Seal | Silicon Carbide |
| Standards | CSA |
| UNSPSC | 40151517 |
| Weight | 194.000000 |
| SKUs | 4NE77 |
Description
Submersible Sewage Pump, Power Rating 3 HP, Voltage @ 60 Hz 460 Volts, Phase Three, Speed 1750 RPM, Current Rating 6.0 Amps, Discharge 3" ANSI, Flange Not Included, Cord Length 20 Feet, Impeller Cast Iron, Shut Off 54 Feet, Water Flow @ 15 Feet of Head 390 GPM, Water Flow @ 20 Feet of Head 350 GPM, Water Flow @ 25 Feet of Head 310 GPM, Water Flow @ 30 Feet of Head 265 GPM, Water Flow @ 40 Feet of Head 160 GPM, Water Flow @ 45 Feet of Head 100 GPM.
Restrictions
- Note: Operating pump outside of specified range may result in pump damage and/or shortened pump life. For pump switches, see page 4049. For pump control panels, see page 4048.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Submersible Sewage Pumps
- Pumps handle solids-laden wastewater in dewatering, effluent waste handling, onsite wastewater treatment, and septic or municipal sewer system pumping applications. 1-phase motors have thermal overload protection. Switch included, except for manual pumps.
- Max. solids dia.: 2-1/2" 1-phase, oil-filled motors (except where noted)
- Goulds
- Max. liquid temp.: 140 F
