
Average Rating: 5

Specs
| Item | C-Frame Motor |
|---|---|
| Motor Type | Shaded Pole |
| Enclosure | Open Air-Over |
| HP | 1/40 |
| Number of Speeds | 1 |
| Nameplate RPM | 3000 |
| NEMA/IEC Frame | Nonstandard |
| Voltage | 115 |
| Frequency | 60 Hz |
| Phase | 1 |
| Full Load Amps | 1.19 |
| Mounting | Stud/Hole |
| Thermal Protection | Auto |
| Insulation Class | B |
| Service Factor | 1.0 |
| Bearings | Sleeve |
| Ambient Temperature | 40 Degrees C |
| Rotation | CWSE |
| Length Less Shaft | 2-5/8" |
| Shaft Dia. | 1/4" |
| Shaft Length | 1" |
| Stack Size | 1-1/2" |
| Stud Quantity | 2 |
| Stud Size | #8-32 |
| Stud Location | Shaft End |
| Mounting Holes | Opposite Shaft End |
| O.C. Mounting | 1-7/8" |
| RPM Range | 2350 to 3600 |
| Standards | UL Recognized (E37403/E40077/E47479), CSA Certified (701887) |
| UNSPSC | 26101602 |
| Weight | 2.600000 |
| SKUs | 4M076 |
Description
- Stud/Hole-Mount
- Sleeve-bearing models are mechanically reversible by inverting the rotor. For use in small fans and blowers found in bathroom ventilators, range hoods, electric heaters, hair dryers, slide projectors, air cleaners, humidifiers, and refrigeration equipment.
- UL Recognized and CSA Certified.
- Mounting: all-angle Enclosure: open air-over Service factor: 1.0 Insulation: Class B Max. ambient: 40 C
- Mounting: two #8-32 studs at shaft end, and mounting holes on each side of the stator, 1-7/8" OC
Customer Reviews
Great little motor
Wednesday, April 06, 2011Perfect replacement for a motor no longer available for a heater blower. Drillspot is spot on with the customer service and super fast shipping. Thanks and you are the best!
Perfect replacement motor for a fireplace blower.
Listing rotation as clockwise or counter-clockwise.






