Gearmotor, AC, 1.1 RPM3M095 79714
Average Rating: 4.7
|Full Load Torque (In.-Lbs.)||50.0|
|Starting Torque (In.-Lb.)||50|
|Overhung Load (Lb.)||3.5|
|Full Load Amps||0.32|
|Motor Type||Shaded Pole|
|Length Less Shaft (In.)||2-1/16|
|Shaft Dimensions (In.)||5/16 x 3/4|
|Bearings||Porous Bronze Sleeve on Both Case and Motor|
|Gear Case||Zinc Die Cast with Steel Cover|
|RPM Range||0 to 15|
- Gearcase: die-cast zinc with steel cover Lubrication: grease-filled Gears: Delrin and steel Bearings: porous bronze sleeve on both case and motor Mounting: all-position Rotation: clockwise facing output shaft Thermal protection: impedance, for 115V 60-Hz models only All are CSA Certified. 115V 60-Hz models are UL Recognized
Average Product Rating: 4.7based on 3 reviews
Redline at 1.1 RPMTuesday, February 07, 2012
It is a quality motor that performs as specified.
I liked the threaded mounting holes and large round shaft with flat
It could have spade terminals
Dayton Gearmotor, AC, 1.1 RPMTuesday, January 03, 2012
Motor quieter than Fasco. Quick receipt of product.
Have pre-drilled hole for CAM
Tire Roller MotorTuesday, December 06, 2011
The part was an exact duplicate of the one I replaced, took only a couple minutes to get back going again with my tire roller. I expected a few days delivery, but it showed up in 2 days. Very prompt shipping department. I would definitely buy from Drillspot again.