Jet Pump Motor, 3 Phase, 1/2 HP, Nameplate RPM 3450, Voltage 208-230/460, 3 Phase, Frame 56J, Totally Enclosed Fan Cooled, Full Load Amps 2.1-2.0/1.0, 60/50 Hz, Mounting Face, Thermal Protection None, Insulation Class A, Service Factor 1.6, Ball Bearings, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCW, Overall Length 11-7/16 In., Shaft Dia. 5/8 In., Shaft Length 2-3/8 In.
Restrictions- Note: Must equal or exceed service factor and HP for proper replacement.
3-Phase 56J Frame Face-Mount Jet Pump Motors- Shaft: stainless steel, 7/16-20 UNF-2A RH threaded 11/16" from end, 2-7/16"L. Open dripproof models have a shaft slinger and gasketed conduit box to protect against moisture and contamination. Dayton motors will operate at 50 Hz on 190/380V at 5/6 of 60 Hz HP and rpm. For use in industrial, commercial, centrifugal, and hydraulic pumps.
- All models are UL Recognized and CSA Certified.
- Mounting: face or base Insulation: Class B, except 4N070 is Class A Max. ambient: 40 C Thermal protection: none Bearings: ball