Century DL1036

Century

Motor, PSC, 1/3 HP, 1075 RPM, 115V, 48Y, OAO

DL1036 85101
Average Rating: 5
Read Reviews (1) Write a Review
$100.11 + 3 Business Day Shipping $14.95

Sponsored Links

Specs

ItemDirect Drive Blower Motor
Motor TypePSC
EnclosureOpen Air-Over
HP1/3
Nameplate RPM1075
Voltage115
Full Load Amps4.9
Hz60
Phase1
Frame48Y
Service Factor1.0
Max. Ambient Temp.40 Degrees C
Insulation ClassB
DutyContinuous Air Over
Number of Speeds3
MountingRing/Stud/Band
BearingsSleeve
Thermal ProtectionAuto
RotationCW/CCW
Body Dia.5-5/8"
Length Less Shaft5-1/2"
Shaft Dia.1/2"
Shaft Length4"
Capacitor IncludedNo
Capacitor Required2MDV6
Resilient Ring Dia.2-1/4"
Ring to Ring Center5-1/16"
Stud Pattern3-5/8 x 3-5/8"
Stud Size#8-32 x 5/8"
RPM Range1000-1380
Standards UL Recognized, CSA Certified
Application Direct Drive Furnace Blowers, Unit Heaters, Air Conditioners, Many Other Shaft Mounted Fan and Blower Uses
UNSPSC26101602
Weight 12.700000
SKUs 4KA34

Description

Direct Drive Blower Motor, PSC, 1/3 HP, Nameplate RPM 1075, Voltage 115, 1 Phase, Frame 48Y, Open Air-Over, Number of Speeds 3, Full Load Amps 4.9, 60 Hz, Ring/Stud/Band Mounting, Thermal Protection Auto, Insulation Class B, Service Factor 1.0, Sleeve Bearings, Max. Ambient Temp. 40 Degrees C, Rotation CW/CCWShaft Dia. 1/2 In., Shaft Length 4 In., Capacitor Required 2MDV6

PSC Direct-Drive Blower/Fan Motors
  • Motors have quick-reversing leads. High-efficiency models feature a typical energy savings of 10% over standard-efficiency motors. Dayton motors include split ring adapter. Capacitor and mounting hardware sold separately on page 90.
  • Motors are UL Recognized and CSA Certified.
  • Enclosure: continuous, open air-over Mounting: ring/stud/band Ring dia.: 2-1/4" Body dia.: 5-5/8" Service factor: 1.0 Insulation: Class B Thermal protection: auto Bearings: sleeve Rotation: CW/CCW

Customer Reviews

Average Product Rating: 5
based on 1 reviews

Excellent replacement for attic ventilator

Monday, May 16, 2011

I have an attic ventilator that I purchased at Home Depot that goes through fan motors every few years. Fortunately, they sell replacements but they only last 2-3 years before seizing. After going through several, I decided to buy a more robust replacement with more power, better build quality and hopefully longer service life. This motor fit the bill and is only 5/8” larger in diameter so I did have to modify the mounting bracket to make it fit. It runs more quietly and seems to move a lot more air probably because it is 1/3 HP vs. 1/7 HP for the older motor. This is an a/c blower motor so it should last a lot longer and the difference in cost between the lower quality replacement offered at Home Depot and this motor is less than $20. If your handy and can modify the mounting bracket to accommodate its larger diameter it will serve you well. By the way, the parts came from Grainger who actually charge more for it than Drillspot.com – go figure!

Quiet, powerful, reversible, well built

Submitted by ART in Tampa
More Products
Air King 9166 FanWhole House20 InAir KingFanWhole House20 In916646992(0 reviews)$312.10 + $27.30 Shipping
Air King 9018 Wall Mount Fan, 1970/1520/1170 cfm, 18 in.Air KingWall Mount Fan, 1970/1520/1170 cfm, 18 in.901849548 (0 reviews)$97.60 + $13.00 Shipping
Air King 9016 Wall Mount Fan, 1510/1380/1190 cfm, 16 in.Air KingWall Mount Fan, 1510/1380/1190 cfm, 16 in.901646793(0 reviews)$77.60 + $13.65 Shipping
Air King 9145 Clip On Fan, 10-3/8 In. H, 8-1/8 In. LAir KingClip On Fan, 10-3/8 In. H, 8-1/8 In. L914548854(0 reviews)$27.35 + $8.45 Shipping
Lasko Products 2554 42" Wind Curve FanLasko Products42" Wind Curve Fan2554295324(0 reviews)$70.42 + $16.10 Shipping