Pump, Oil Coolant, 1/3hp
Average Rating: n/a
|Item||Oil Coolant Pump|
|Bolt Circle Dia. (In.)||6.3|
|GPM of Water @ 5 Ft. of Head||54|
|GPM of Water @ 7 Ft. of Head Low||52.0|
|GPM of Water @ 10 Ft. of Head||47|
|GPM of Water @ 13 Ft. of Head Low||44.0|
|GPM of Water @ 15 Ft. of Head||36|
|GPM of Water @ 16 Ft. of Head||41.0|
|GPM of Water @ 20 Ft. of Head||28.5|
|GPM of Water @ 30 Ft. of Head||20|
|Body Material||Cast Iron|
|Max. Recommended Viscosity||800 at 50 hz, 300 at 60 hz|
|Shaft Material||Carbon Steel|
|Shaft Seal||Mechanical Seal|
|Application||Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Except Grinders|
|Includes||Ceramic stationary seal face, carbon graphite rotating seal face, and steel springs|
- Mount above liquid level in all locations. Feature mechanical seals with carbon/ceramic shaft seal, Buna N elastomers, and steel springs. Use with all types of machines, except grinders.
- Pumps circulate coolant and spray cutting oil. For replacement filters, see page 4108.
- Max. fluid temp.: 104 F Max. viscosity: 340 SSU Max. suction lift: 2.3 ft.
- 3450 rpm motors Cast-iron bodies and volutes