Average Rating: n/a
$309.85 + 3 Business Day Shipping $13.00
Specs
| Item | Circulator Pump |
|---|---|
| Type | Closed Loop |
| HP | 1/8 |
| Voltage | 115 |
| Phase | 1 |
| Amps | 1.10 |
| Inlet/Outlet | Flanged |
| Housing Material | Cast Iron |
| Face to Face Dimension (In.) | 6-3/8 |
| Max. Temp. (F) | 230 |
| Max. Working Pressure (PSI) | 125 |
| Flange/Union Included | No |
| Shut-Off (Ft.) | 11 |
| Impeller Material | Polypropylene |
| Thermal Protection | Impedance |
| GPM of Water @ 1 Ft. of Head | 30 |
| GPM of Water @ 2 Ft. of Head | 28.5 |
| GPM of Water @ 3 Ft. of Head | 27.5 |
| GPM of Water @ 4 Ft. of Head | 25 |
| GPM of Water @ 5 Ft. of Head | 22.5 |
| GPM of Water @ 6 Ft. of Head | 20 |
| GPM of Water @ 7 Ft. of Head | 18 |
| GPM of Water @ 8 Ft. of Head | 15 |
| GPM of Water @ 9 Ft. of Head | 11 |
| GPM of Water @ 10 Ft. of Head | 4 |
| Length (In.) | 7-1/4 |
| Width (In.) | 5-3/8 |
| Max. GPM @ Head (Ft.) | 30 @ 1 |
| Best Efficiency GPM @ Head (Ft.) | 18 @ 7 |
| Min. GPM @ Head (Ft.) | 4 @ 10 |
| Drive Type | Direct |
| Construction | 30 Percentage Glass-filled Polyether Sulfone |
| FPT (In.) | 3/4 |
| Manufacturers Warranty Length | 3 years |
| UNSPSC | 40151504 |
| Weight | 10.000000 |
| SKUs | 4PC77 |
Description
Circulator Pump, Hot Water, 1/8 HP, 1 Phase, Voltage 115, 1.10 Amps, Inlet/Outlet Flanged, Housing Material Cast Iron, Max. Temp. 230 F, Max. Working Pressure 125 PSI, Shut-Off 11 Ft., Impeller Material Polypropylene, Impedance Thermal Protection
Cast-Iron
- Hot Water Circulating Pumps
- Not for use in potable water systems.
- Maintenance-free in-line pumps are made for hydronic heating, domestic hot water recirculation, solar thermal heating, and heat recovery systems. 2400 Series has a 1/2" carbon/silicon-carbide mechanical seal, permanently lubricated ball bearings with 1/2" stainless steel shaft. Wet rotor. 00 Series has a replaceable cartridge that contains all moving parts and the motor is impedance-protected.
