Average Rating: 5
$777.03 + 3 Business Day Shipping $29.28
Specs
| Item | Pump |
|---|---|
| Type | Centrifugal |
| HP | 1/3 |
| Phase | 3 |
| Voltage | 208-230/460 |
| Amps | 2.0-1.9/.95 |
| Inlet (In.) | 1-1/4 |
| Outlet (In.) | 1 |
| Motor Enclosure | ODP |
| Housing Material | Cast Iron |
| Impeller Type | Closed |
| Impeller Material | Bronze |
| Max. GPM @ Head (Ft.) | 29 @ 20 |
| Best Efficiency GPM @ Head (Ft.) | 20 @ 30 |
| Min. GPM @ Head (Ft.) | 10 @ 37 |
| Max. Head (Ft.) | 40 |
| Seal Material | Stainless Steel, Buna N Carbon/Ceramic Parts |
| Length (In.) | 13-7/8 |
| Width (In.) | 8-7/8 |
| Height (In.) | 9 |
| Impeller Dia. (In.) | 3-3/16 |
| NEMA/IEC Frame | 56J |
| Motor RPM | 3500 |
| Hz | 60 |
| Service Factor | 1.75 |
| Wetted Materials | CI,BR,Carbon,Ceramic,Buna N,SS |
| Volute Material | Cast Iron |
| Shaft Material | 303 Stainless Steel |
| Max. Liquid Temp. (F) | 212F with Standard Seal, 250F with High Temperature Seal |
| GPM of Water @ 20 Ft. of Head | 29 |
| GPM of Water @ 30 Ft. of Head | 20 |
| Best Efficiency Range GPM @ Head (Ft.) | 13-28 GPM @ 32-21 Ft |
| Max. Specific Gravity | 1.0 |
| Max. Case Pressure (PSI) | 125 |
| Max. Fluid Viscosity | 40 SSU |
| Inlet Pressure (PSI) | 30 |
| Max. Pressure (PSI) | 125 |
| Duty | Continuous |
| Max. Dia. Solids (In.) | 1/16 |
| Port Rotation | 45 Increments |
| Drain Plug | All Position |
| Manufacturers Warranty Length | 1 Year |
| Application | Booster Service Spraying systems Irrigation Water Circulation Liquid Transfer General Purpose Pumping |
| UNSPSC | 40151503 |
| Weight | 35.050000 |
| SKUs | 1N523 |
Description
Centrifugal Pump, Power Rating 1/3 HP, Voltage @ 60 Hz 208-230/460 Volts, Current Rating 2/1 Amps, Impeller Diameter 3 3/16 Inches, Phase Three, Maximum Head 40 Feet, Motor Enclosure ODP, Outlet 1 Inch, Inlet 1 1/4 Inches, Service Factor 1.75, Length 13 7/8 Inches, Height 9 Inches, Width 8 7/8 Inches, Water Flow @ 18 Feet of Head 32 GPM, Water Flow @ 20 Feet of Head 29 GPM, Water Flow @ 22 Feet of Head 29 GPM, Bronze Fitted
Restrictions
- Note: 1N497, 1N495, and 1N489 have a high head impeller.
- California Proposition 65 Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Straight Centrifugal Pumps
- Pumps have continuous-duty motors to handle liquid transfer, water circulation, booster service, irrigation, spray system, jockey pump, and other general-purpose pumping applications. Close-coupled design has back pull-out for easy maintenance. Vent and drain plugs in all positions. Piping is female thread (NPT), except 1N456, 1N459, and 1N458 are 12516 ANSI flat-faced flanges. 3-phase pumps do not have overload protection, which must be provided in starter units, sold separately. Pump control box sold separately; see page 4048. UL Listed and CSA Certified. 3- to 20-HP motors: Max. case working pressure is 175 psig; max. suction pressure is 100 psig; discharge can be rotated in 90 increments. Renewable bronze wear ring. Blue baked-on electrocoat paint finish. 1/3- to 2-HP motors: Max. case working pressure is 125 psig, except as noted below; discharge can be rotated in 45 increments, except as noted below. Motors are 3500 rpm with NEMA 56J frame, except ODP 3CCV8 is 3500/2900 rpm, 90 increments; TEFC 2VRU2, 2VRU3, 2VRU4, 2VRU5, 2VRT9, and 2VRU1 are 3450 rpm with NEMA 143 frame, 4 position increments; and TEFC 3CCV7 3500/2900 rpm, 90 increments.
- Cast-iron housing, bronze impeller 300 series stainless steel shaft and sleeve Mechanical shaft seal with stainless steel, Buna N, carbon/ceramic parts Max. liquid temp.: 212 F (100 C)
Customer Reviews
Product Great, But...
Monday, January 30, 2012The product and salesman that took our order were terrific. My only issue was that the product originally ordered was on back order everywhere. So when I got a quote from Drillspot that I could have it in a few days, I was very surprised and needed to confirm. When I called Drillspot to make sure. I talked to a lady that just keep saying "if it's on the quote" over and over. After getting approval on my end the next step was to order and when I did, somehow "it wasn't availible". I really wish the saleslady would have just checked it out for me before I wasted more time.
Right part that I ordered was sent
