Machine Tool Pumps

Shaft Material

• Carbon Steel(8)
• Steel(2)

Max. Recommended Viscosity

• 500 SSU(8)
• 800 at 50 hz, 300 at 60 hz(1)
• 1200 at 50 hz, 600 at 60 hz(1)

Voltage

• 230/460(6)
• 115/230(4)

Shut-Off (Ft.)

• 32(6)
• 34(2)
• 18(2)

RPM

• 3450(6)
• 3440(2)
• 1750(2)

Phase

• 3(6)
• 1(4)

Motor Enclosure

• TENV(6)
• TEFC(2)

Item

• Oil Coolant Pump(6)
• Pumping System(2)
• Pump(2)

Inlet/Outlet (In.)

• 1/2(6)
• 3/4(2)
• 1-1/4(2)

Impeller Material

• Plastic(6)
• Cast Bronze(2)
• 304 SS(2)

GPM of Water @ 30 Ft. of Head

• 5(6)
• 11(2)

GPM of Water @ 20 Ft. of Head

• 14(6)
• 22(2)

GPM of Water @ 15 Ft. of Head

• 17(6)
• 28.5(2)
• 26.4(2)

GPM of Water @ 10 Ft. of Head

• 20(6)
• 43.5(2)
• 32(2)

Max. Immersion Depth (In.)

• 7(5)
• 8-1/4(2)

For Use With

• Nonflammable Liquids Compatible with Pump Component Materials(5)
• Non-Flammable Liquids Compatible with Pump Component Materials(4)

Application

• Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Including Grinders(5)
• Machine Tool Coolants, Light Oils(2)
• For Machining Lubricants, Coolants, Flushing and Circulation(2)
• Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Except Grinders(1)

Max. Temp.

• 180(4)
• 200 F(2)
• 180 Degrees F(2)
• 104(2)

GPM of Water @ 5 Ft. of Head

• 20(4)
• 52(2)
• 23(2)

Discharge Port (In.)

• 1/2(4)
• 3/4(2)
• 1-1/4(2)

Bolt Circle Dia. (In.)

• 6.37(4)
• 7.25(2)
• 6.3(1)
• 2 at 6.3 and 2 at 5.28(1)

Type

• Suction(3)
• Immersion(3)
• Pump/Tank(2)
• Coolant(2)

Amps

• 3/1.5(3)
• 1/0.5(2)
• .8/.4(2)
• 5.59/2.83(1)
• 0.8/0.4(1)
• 0.7/0.43(1)

Width (In.)

• 8-7/16(2)
• 7-3/8(2)
• 5-29/32(2)
• 4-1/4(2)
• 20(2)

Tank (Gal.)

• 30(2)

Shaft Seal

• Nitrile Butadiene Rubber(2)
• Carbon(2)
• Mechanical Seal(1)

Nominal Tank Depth (In.)

• 9(2)
• 10(2)

Motor Type

• TENV(2)
• CSCR(1)
• 3 Phase(1)

Min. Immersion Depth (In.)

• 4(2)
• 3(2)

Max. Suction Lift (Ft.)

• 2(2)

Length (In.)

• 7-3/8(2)
• 48(2)
• 4-1/4(2)
• 11 (2)
• 9-1/8(1)
• 14-1/4(1)

Includes

• Chip Basket(2)
• Ceramic stationary seal face, carbon graphite rotating seal face, and steel springs(1)

Height (In.)

• 9(2)
• 21-7/16(2)
• 17-3/8(2)
• 14-5/8(2)
• 9-1/16(1)
• 14-7/32(1)

GPM of Water @ 9 Ft. of Head

• 45.5(2)
• 21(2)

GPM of Water @ 7 Ft. of Head Low

• 49.3(2)
• 22(2)

GPM of Water @ 6 Ft. of Head

• 51(2)
• 22(2)

GPM of Water @ 3 Ft. of Head

• 54(2)
• 23(2)

GPM of Water @ 27 Ft. of Head

• 8(2)

GPM of Water @ 26 Ft. of Head

• 9(2)

GPM of Water @ 24 Ft. of Head

• 10(2)

GPM of Water @ 23 Ft. of Head

• 11(2)

GPM of Water @ 21 Ft. of Head

• 13(2)

GPM of Water @ 18 Ft. of Head

• 15(2)

GPM of Water @ 16 Ft. of Head

• 26.0(2)
• 19.6(2)
• 16(2)

GPM of Water @ 13 Ft. of Head Low

• 35.3(2)
• 30.0(2)
• 18(2)

GPM of Water @ 12 Ft. of Head

• 38.2(2)
• 19(2)

GPM of Water @ 1 Ft. of Head

• 55.5(2)

GPM of Oil 500 SSU @ 9 Ft. of Head

• 19.2(2)
• 16.5(2)

GPM of Oil 500 SSU @ 6 Ft. of Head

• 25.8(2)
• 17.5(2)

GPM of Oil 500 SSU @ 3 Ft. of Head

• 32(2)
• 19(2)

GPM of Oil 500 SSU @ 24 Ft. of Head

• 8(2)

GPM of Oil 500 SSU @ 21 Ft. of Head

• 10.5(2)

GPM of Oil 500 SSU @ 18 Ft. of Head

• 12(2)

GPM of Oil 500 SSU @ 15 Ft. of Head

• 13.5(2)
• 1.4(2)

GPM of Oil 500 SSU @ 12 Ft. of Head

• 15(2)
• 10.8(2)

GPH of Water @ 9 Ft. of Head

• 2730(2)
• 1260(2)

GPH of Water @ 8 Ft. of Head

• 2868(2)
• 1290(2)

GPH of Water @ 5 Ft. of Head

• 3120(2)
• 1320(2)

GPH of Water @ 3 Ft. of Head

• 3240(2)
• 1380(2)

GPH of Water @ 2 Ft. of Head

• 3276(2)
• 1380(2)

GPH of Water @ 10 Ft. of Head

• 2610(2)
• 1200(2)

GPH of Water @ 1 Ft. of Head

• 3330(2)
• 1380(2)

Elastomer

• Viton(2)
• NBR(2)
• Buna N(2)

Dia. (In.)

• 8-3/8(2)