Machine Tool Pumps

Inlet/Outlet (In.)

• 3/8(11)
• 3/4(1)

Body Material

• Cast Iron(11)

Max. Recommended Viscosity

• 500 SSU(9)
• 800 at 50 hz, 300 at 60 hz(1)
• 1200 at 50 hz, 600 at 60 hz(1)
• 110(1)

Shut-Off (Ft.)

• 13(8)
• 21(2)
• 8.125(1)
• 10(1)

RPM

• 3450(8)
• 3440(2)
• 1750(1)

Motor Enclosure

• TENV(8)
• TEFC(1)

Impeller Material

• Plastic(8)
• Cast Bronze(2)
• 304 SS(1)

Discharge Port (In.)

• 3/8(8)
• 3/4(1)

Phase

• 3(7)
• 1(4)

Voltage

• 230/460(6)
• 115/230(5)
• 230(1)

Shaft Material

• Carbon Steel(6)
• Steel(4)
• Stainless Steel(1)

Max. Immersion Depth (In.)

• 6(6)
• 6-3/8(1)
• 5-7/8(1)

Item

• Oil Coolant Pump(6)
• Pumping System(4)
• Pump(1)
• Machine Tool Coolant Pump(1)

GPM of Water @ 5 Ft. of Head

• 9(6)
• 8(2)
• 17.1(2)
• 9.8(1)
• 5.6(1)

Bolt Circle Dia. (In.)

• 5(6)
• 5.5(2)
• 5.2(1)
• 2 at 5.2 and 2 at 5.28(1)

Nominal Tank Depth (In.)

• 8(5)

Max. Temp.

• 180(5)
• 180 Degrees F(4)
• 104(2)
• 200 F(1)

GPM of Oil 500 SSU @ 3 Ft. of Head

• 8(5)

For Use With

• Nonflammable Liquids Compatible with Pump Component Materials(5)
• Non-Flammable Liquids Compatible with Pump Component Materials(5)

Application

• Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Including Grinders(5)
• Machine Tool Coolants, Light Oils(4)
• Works With Most Optimum And Other Machine Tool Units Including The 5TXG1 & 5TXG3(1)
• For Machining Lubricants, Coolants, Flushing and Circulation(1)
• Circulation of Coolant, Spraying of Cutting Oil in all Types of Machines, Except Grinders(1)

Type

• Pump/Tank(4)
• Suction(3)
• Immersion(3)
• Coolant(1)

Motor Type

• TENV(4)
• 3 Phase(1)

Min. Immersion Depth (In.)

• 3(4)
• 2(1)

Includes

• Chip Bowl(4)
• Pump, Coolant Tank, PVC Hose , Clips, Switch, Coolant Hose(1)
• Ceramic stationary seal face, carbon graphite rotating seal face, and steel springs(1)

GPM of Water @ 9 Ft. of Head

• 6(4)
• 4.6(1)

GPM of Water @ 7 Ft. of Head Low

• 7(4)
• 16.3(2)
• 7.8(1)

GPM of Water @ 6 Ft. of Head

• 8(4)
• 9(1)

GPM of Water @ 3 Ft. of Head

• 10(4)
• 7.25(1)
• 11.3(1)

GPM of Water @ 10 Ft. of Head

• 5(4)
• 14.4(2)

GPM of Oil 500 SSU @ 9 Ft. of Head

• 4.8(4)

GPM of Oil 500 SSU @ 6 Ft. of Head

• 5.5(4)
• 4.4(1)

GPM of Oil 500 SSU @ 12 Ft. of Head

• 1(4)

GPH of Water @ 9 Ft. of Head

• 360(4)
• 276(1)

GPH of Water @ 8 Ft. of Head

• 420(4)
• 388(1)

GPH of Water @ 5 Ft. of Head

• 540(4)
• 588(1)

GPH of Water @ 3 Ft. of Head

• 600(4)
• 677(1)

GPH of Water @ 2 Ft. of Head

• 660(4)
• 717(1)

GPH of Water @ 10 Ft. of Head

• 300(4)

GPH of Water @ 1 Ft. of Head

• 720(4)
• 750(1)

Width (In.)

• 5-1/2(3)
• 9-3/4(2)
• 5-3/16(2)
• 3-1/2(2)
• 16(2)
• 10.8(1)

Amps

• .7/.35(3)
• 0.7/0.35(2)
• 0.50/0.25(2)
• 0.32/0.19(2)
• .32/.19(2)
• 0.4(1)

Tank (Gal.)

• 21(2)
• 10(2)
• 2.4(1)

Shaft Seal

• Carbon(2)
• Nitrile Butadiene Rubber(1)
• Mechanical Seal(1)

Max. Suction Lift (Ft.)

• 2(2)

Length (In.)

• 5-1/2(2)
• 44(2)
• 3-1/2(2)
• 24(2)
• 8-3/8(1)
• 5-13/16(1)
• 15.5(1)
• 12-1/4(1)

Height (In.)

• 6-7/8(2)
• 16(2)
• 15-1/2(2)
• 11-1/4(2)
• 8-1/8(1)
• 14.8(1)
• 14-1/16(1)
• 12-1/4(1)

GPM of Water @ 16 Ft. of Head

• 8.8(2)

GPM of Water @ 15 Ft. of Head

• 10.6(2)

GPM of Water @ 13 Ft. of Head Low

• 11.7(2)

Elastomer

• Viton(2)
• Buna N(2)

GPM of Water @ 1 Ft. of Head

• 8.5(1)
• 12.5(1)

Dia. (In.)

• 5-9/16(1)