Upright Sump Pumps

Motor Enclosure

• TEFC(38)
• ODP(5)

Duty

• Continuous(38)
• Intermittent(5)

UNSPSC

• 40151512(35)

Type

• Vertical(27)
• Commercial/Industrial(11)
• Residential Pedestal(5)

Thermal Protection

• Yes(27)
• Automatic(16)

RPM

• 3450(27)
• 1725(11)
• 1750(5)

Phase

• 1(27)
• 3(11)
• Single(5)

Motor Housing

• Cast Iron(27)
• Aluminum(11)
• Rolled Steel with Cast Aluminum Endshields(5)

Max. Dia. Solids (In.)

• 1/16(27)
• 7/16(8)
• 0.375(5)
• 3/4(3)

Item

• Pump(27)
• Upright Sump Pump(11)
• Non-Submersible Sump Pump(5)

Hz

• 50/60(27)
• 60(16)

For Use With

• Corrosives(27)
• Nonflammable Liquids Compatible with Pump Materials of Construction(11)
• Water Only(5)

Features

• Fume Barrier(27)
• An Automatic Float Type Switch, Double Shielded Ball Bearings at Both Ends(11)

Application

• In-Tank/Out of Tank(27)
• For Pumping Clear Water or Effluent from Wet Pits, Loading Docks, Boiler Dump Pits, Below Ground Vaults, Elevator Pits and Other Residential, Commercial and Industrial Applications, for Hot Water Applications Up to 200 Degrees Fahrenheit(11)

Voltage

• 115(24)
• 230/460(11)
• 230(8)

Volute Material

• CPVC(21)
• PVDF(6)
• Cast Iron(6)
• Stainless Steel(5)
• Cast Bronze(2)
• Bronze(2)
• ABS(1)

Max. Liquid Temp. (F)

• 180(21)
• 200(11)
• 240(5)
• 140(4)
• 165(1)
• 120(1)

Impeller Material

• CPVC(21)
• Stainless Steel(13)
• PVDF(6)
• Cast Iron(2)
• ABS(1)

Housing

• CPVC(21)
• PVDF(6)
• Cast Iron(2)
• Cast Bronze(2)
• ABS(1)

Cord Size

• 18/3(21)
• 16/3(11)

Switch

• Yes(16)
• Float with Rod and Stops(16)
• No(11)

Switch Type

• Vertical(16)
• Manual(16)

Motor Type

• PSC(16)
• Capacitor Start(16)
• 3 Phase(11)

Min. Sump Pit Dia. (In.)

• 18(16)

Cord Type

• SJT(16)
• LL61600(13)
• LL61599(1)
• LL61598(1)
• LL61597(1)

Pump Base

• Stainless Steel(13)
• Zinc Plated Steel(2)
• Plastic(1)

On Point (In.)

• 11(11)
• 13-15(5)

Off Point (In.)

• 4(11)
• 5(5)

Includes

• Manual(11)

Float Material

• Stainless Steel(11)
• Copper(4)
• Polyethylene(1)

Cord Length (Ft.)

• 8(11)
• 7 with Plug(8)
• 7 w/o Plug(8)
• 10(5)

Column Material

• Stainless Steel(11)
• Steel(2)
• Brass(2)
• ABS(1)

Bearing Type

• Sleeve(11)
• Dual Ball(5)

Bearing Material

• Carbon(11)

Agency Compliance

• CUS(11)
• UL(5)

Max. Head (Ft.)

• 20(9)
• 21(6)
• 48(3)
• 47(3)
• 36(3)
• 21.4(3)
• 20 1/2(3)
• 19.5(3)
• 25(2)
• 24(2)
• 10(2)
• 82(1)
• 64(1)
• 125(1)
• 108(1)

HP

• 1/3(9)
• 1/4(8)
• 1/2(7)
• 3/4(6)
• 1/6(4)
• 1(3)
• 1/20(2)
• 7-1/2(1)
• 5(1)
• 3(1)
• 2(1)

Adapter (In.)

• N/A(9)
• 1-1/2(5)

NPT Outlet (In.)

• 1/2 M(8)
• 1-1/2(8)
• 3/4 F(6)
• 1 M(6)
• 1-1/4(5)
• 1-1/4 M(4)
• 2(3)
• 1-1/2 M(3)

Dia. (In.)

• 11(8)
• 12(5)
• 13(3)

NPT Inlet (In.)

• 3/4 F(6)
• 1-1/4 F(6)
• 1 F(6)
• 1-1/2 F(4)
• 2 F(2)
• 1/2 F(2)
• 2-1/2 F(1)

GPM of Water @ 5 Ft. of Head

• 54(6)
• 65(4)
• 55(3)
• 103(3)
• 10(2)

GPM of Water @ 15 Ft. of Head

• 30(6)
• 9(3)
• 39(3)
• 36(3)
• 14(3)
• 49(2)
• 43(2)

GPM of Water @ 10 Ft. of Head

• 44(6)
• 58(4)
• 72(3)
• 47(3)
• 14(3)

Best Efficiency GPM @ Head (Ft.)

• 44 @ 10(6)
• 60 @ 12(3)
• 55 @ 37(3)
• 28 @ 42(3)
• 27 @ 30(3)
• 18 @ 17(3)
• 17 @ 17(3)
• 13 @ 16(3)
• 11 @ 13(3)
• 7 @ 7(2)
• 50 @ 14(2)
• 75 @ 64(1)
• 65 @ 48(1)
• 120 @ 90(1)
• 105 @ 82(1)

Base to Motor Height (In.)

• 13-7/8(6)
• 10-15/16(6)
• 10-13/16(6)
• 25(5)
• 33(4)
• 14-1/8(4)
• 45(3)
• 38-3/4(2)
• 27(2)
• 10-7/8(2)
• 15-7/16(1)
• 15-3/16(1)
• 14-15/16(1)

Amps AC

• 7(6)
• 9(5)
• 9.5(4)
• 1(4)
• 4(3)
• 5.2(2)
• 3.8(2)
• 3.3(2)
• 2.8(2)
• 2(2)
• 12.6(2)
• 1.2(2)
• 9.3(1)
• 8.8(1)
• 4.2(1)
• 14.4(1)
• 12.8(1)
• 1.85(1)
• 1.6(1)

Height (In.)

• 30-1/2(5)
• 43(4)
• 55(3)
• 49(2)
• 37(2)

GPM of Water @ 20 Ft. of Head

• 8(3)
• 5(3)
• 2(3)
• 12(3)
• 35(2)
• 20(2)