coupling
Narrow By
Categories
- cam and groove coupling(72)
- cam coupling(72)
- cam lever coupling(67)
- clamp coupling(384)
- conduit coupling(99)
- connect coupling(251)
- control coupling(542)
- control coupling hub(95)
- coupling hub(246)
- coupling insert(91)
- couplings(77)
- couplings and disconnects(346)
- couplings and gaskets(67)
- groove coupling(72)
- half coupling(94)
- jaw coupling hub(151)
- jaw type coupling(251)
- motion control coupling(542)
- motion control coupling hub(95)
- Nibco Inc coupling(215)
- Plews/Amflo coupling(114)
- Plews/Amflo quick coupling(114)
- quick connect coupling(251)
- quick coupling(348)
- reducer coupling(78)
- reducing coupling(444)
- rigid clamp coupling(347)
- rigid shaft coupling(311)
- shaft coupling(378)
- type coupling(251)
Specification
Package Quantity
Material
- Aluminum(543)
- Steel(484)
- Stainless Steel(247)
- Black Oxide Steel(171)
- Brass(156)
- Iron(118)
- Wrot Copper(79)
- Polyvinyl Chloride(77)
- Malleable Iron(64)
- 304 Stainless Steel(56)
- Chlorinated Polyvinyl Chloride(55)
- Copper(43)
- Anodized aluminum(24)
- Steel/Aluminum(22)
- Die-cast zinc(20)
- Iron / EPDM Gasket(19)
- Polypropylene(17)
- Glass Reinforced Nylon(16)
- Cast iron(16)
- Aluminum Hubs, Stainless Steel Bellows(15)
- zinc plated steel(12)
- Sintered iron(12)
- Brass / Glass Reinforced Nylon(12)
- Solid Steel(10)
- Feraloy (REG TM) Iron Alloy(7)
- Steel / Rubber(6)
- Die-Cast(6)
- Acetal(6)
- Nylon(5)
- Hytrel(4)
Item
- Motion Control Coupling(447)
- Reducing Coupling(440)
- Coupling(410)
- Rigid Shaft Coupling(347)
- Jaw Coupling Hub(215)
- Coupler Plug(100)
- Motion Control Coupling Hub(95)
- Half Coupling(94)
- Coupler(82)
- Quick Coupler Body(63)
- Reducer Coupling(55)
- Adapter(51)
- Flexible Coupling(42)
- S-Flex Shaft Coupling(41)
- Shaft Coupler Body(36)
- Conduit Coupling(34)
- Merchant Coupling(32)
- Pipe Coupling(27)
- Shaft Coupling Insert(21)
- Coupling Without Stop(19)
- Coupling With Stop(18)
- Universal Coupling(17)
- Shielded Coupling(17)
- Coupler Body(16)
- Dust Plug(15)
- Dust Cap(15)
- Coupling With Rolled Tube Stop(15)
- Coupler and Plug Kit(14)
- Rigid Conduit Coupling(12)
- Swivel Connector(11)
- Pipe Reducer or Increaser(11)
- Flange Coupling Kit(10)
- Female Coupling(10)
- Swing Quick Connect Coupling(9)
- Expansion Coupling(9)
- EZ Span Repair Coupling(9)
- Chain Coupling Body(9)
- Hose To Pipe Connector(8)
- Female Hex Reducing Coupling(8)
- Straight Coupling(7)
- Short Shank Coupling(7)
- Coupling With Dimple Stop(7)
- Threaded Coupling(6)
- Male Coupling(6)
- Full Coupling(6)
- Flange(6)
- Female Hex Coupling(6)
- EMT Coupling(6)
- Rod Coupling(5)
- No Hub Coupling(5)
- Hose End Clamp(5)
- Gasket(5)
- Anchor Coupling(5)
- Repair Coupling(4)
- Reducing Female Hex Nipple(4)
- Quick Coupler(4)
- Hex Coupling(4)
- Compression Coupling(4)
Compliance
Screw Type
- Cap Screw(361)
- Set Screw(95)
- Clamp Screw(72)
- Socket Head Cap Screw(15)
- Socket Set Screw(14)
- Recessed Socket Screw(8)
Connection
- Threaded(317)
- NPT(265)
- Socket Weld(135)
- FNPT(115)
- Female Solder Cup (C x C)(63)
- Slip Socket(58)
- Hub(30)
- Barbed(23)
- Slip(22)
- Female Coupler x FNPT(19)
- Solvent(18)
- Press(18)
- Female Press(18)
- Male Adapter x MNPT(17)
- Male Adapter x FNPT(17)
- Hose Shank x Male Adapter(17)
- Female Coupler x MNPT(17)
- Female Coupler x Hose Shank(17)
- Male Adapter(15)
- Female Coupler(15)
- Compression(13)
- Tube(11)
- No Hub(8)
- Flanged(8)
- Barbed x MNPT(6)
- Barbed x FNPT(6)
- Pipe(4)
- IPS x CTS(4)
Finish
- Anodized Aluminum(308)
- Bright(178)
- Black(146)
- Zinc(129)
- Zinc Plated(106)
- Galvanized(100)
- Nickel(60)
- Aluminum(27)
- Zinc Yellow Dichromate(21)
- Rust Inhibiting Orange Paint(19)
- Plain(19)
- Nickel Plated(14)
- Plastic(10)
- Gold(7)
- Zinc/Anodized(6)
- Anodized(4)
Schedule
Type
- Reducer Coupling(283)
- Coupling(260)
- Quick Disconnect Coupler(164)
- One Piece Clamp Type, Without Keyway(111)
- Industrial Interchange(92)
- Quick Coupler(83)
- Two Piece Clamp Type, Without Keyway(82)
- Two Piece Clamp Type, With Keyway(77)
- Cam and Groove Coupling(59)
- One Piece Clamp Type, With Keyway(53)
- Rigid Conduit & IMC Coupling(47)
- EMT-Thinwall Coupling(42)
- Automotive Interchange(33)
- Stud Coupling(30)
- Straight(30)
- One Piece Clamp Coupling(28)
- One Piece Set Screw Type(24)
- Eccentric(24)
- Pipe Coupling(23)
- Half Coupling(22)
- Universal Interchange(21)
- Concentric(20)
- D(19)
- Clamping Coupling(19)
- ARO Interchange(19)
- Easy Alignment/API(18)
- F(17)
- E(17)
- C(17)
- B(17)
- A(17)
- DP(15)
- DC(15)
- Hi Flow Interchange(14)
- Elastomeric Insert(14)
- Right Hand(12)
- Jaw Coupling Hub(12)
- Set Screw Compression(11)
- Set Screw(11)
- Compression(11)
- Schedule 80(10)
- Nipple(10)
- Industrial, Safety Vent(10)
- Two Piece(9)
- Straight Threaded(9)
- Repair Coupling(9)
- One Piece(9)
- Elbow(9)
- Push To Connect(8)
- Female Stem(8)
- Asian Style Hi Flow Interchange(8)
- Quick Disconnect Plug(7)
- Global Style Hi-Flow(7)
- Copper Tube Size (CTS)(7)
- Clamp Coupling(7)
- XL-S(6)
- Standard(6)
- Rigidlok(R)(6)
- Rain Tight, Insulated Compression(6)
- Pipe Half Coupling(6)
- PEX Crimp(6)
- Insulated Rigid Conduit Compression Connector, Three-piece Coupling(6)
- Hose Stem(6)
- Coupling Flange(6)
- Compresssed Air Industrial Interchange(6)
- Chain/Belt Tensioner(6)
- Barbed, Connector Body(6)
- 90 Degree(6)
- 45 Degree(6)
- Male, Straight Body(5)
- Hose End(5)
- G(5)
- Female, Straight Body(5)
- Faced & Drilled Flanged Concentric(5)
- Beverage Fitting(5)
- 2 Bolt(5)
- (M)NPT End(5)
- (F)NPT End(5)
- Zinc Plated Conduit Set Screw Coupling(4)
- Taper Threaded(4)
- PEX(4)
- Male Stem(4)
- Insert Coupling(4)
- Slip-on(3)
- Set Screw Conduit Coupling(3)
- No Stop(3)
- Male/Female(3)
- Faced & Drilled Flanged Eccentric(3)
- EMT To Rigid(3)
- Double Strand(3)
- Double Male(3)
- Double Female(3)
- Compresssed Air ARO 210(3)
- Combination Screw-In Compression Coupling(3)
- Adapter(3)
Connection Type A x B
- Female NPT x Female NPT(281)
- FIP x FIP(86)
- Copper End x Copper End(83)
- Female NPTF x Quick Connect Coupler(48)
- Male NPTF x Quick Connect Coupler(44)
- Hose Barb x Quick Connect Coupler(34)
- Socket Weld x Socket Weld(30)
- Press x Press(27)
- Slip x Slip(24)
- Tube x Tube(19)
- Female NPTF x Female NPTF(18)
- Socket x Female NPT(16)
- Hose Barb - Lock-On x Quick Connect Coupler(16)
- Tube x Male BSPT(15)
- Male NPTF x Female NPTF(12)
- Male Adapter x Female Thread(11)
- Male Adapter x Male Thread(9)
- Female Iron Pipe x Female Iron Pipe(9)
- Female Coupler x Male Thread(9)
- Tube x Press(8)
- Tube x Male NPT(8)
- Female Coupler x Hose Shank(8)
- Female NPT x Quick Connect Coupler(7)
- Female Coupler(7)
- Male NPT x Quick Connect Coupler(5)
- Male Adapter x Hose Shank(5)
- Male Adapter(5)
- Female Coupler x Female Thread(5)
- FIP x Slip(5)
- PEX x PEX(4)
- Male NPT x Male NPT(4)
Max. Temp. Range (F)
UNSPSC
Keyway
Max. RPM
Class
Max. Angular Misalignment
- 3D(187)
- 2D(133)
- 0.5 Degrees(106)
- 1.5D(64)
- 1 Degree with EPDM Rubber Inserts and 1/4 Degree with H Inserts(33)
- 5D(26)
- 7D(16)
- 1.2D(10)
- 1Degree For EPDM & Neoprene Sleeves, .25 Degree For Hytrel Sleeves(4)
- 1Degree(4)
Screw Size (mm)
Material of Construction
- 316 Stainless Steel(167)
- PVC(152)
- 304 Stainless Steel(143)
- Polypropylene(100)
- Forged Black Steel(91)
- Galvanized Malleable Iron(83)
- Black Malleable Iron(82)
- Black Iron(68)
- Wrot Copper(63)
- Black Cast Iron(53)
- Steel(50)
- Aluminum(50)
- CPVC(43)
- Ductile Iron(37)
- Brass(37)
- Red Brass(33)
- Galvanized Steel(31)
- Elastomeric Polyvinyl Chloride(31)
- Cast-iron(28)
- Zinc(22)
- 300 Stainless Steel And Neoprene(21)
- Copper(18)
- Black Steel(18)
- Malleable Iron(17)
- Galvanized Forged Steel(16)
- Chrome Plated Brass(16)
- Kynar(R)(10)
- ABS(10)
- DZR Brass(9)
- Bronze(9)
- Nylon(8)
- Carbon Steel(7)
- PolyAlloy(6)
- PFA(5)
- Electro-Galvanized Steel(5)
- EPDM(5)
- Die-cast Zinc Alloy(5)
- 303 Stainless Steel(5)
- zinc alloy(4)
- Polyamide 11(4)
- Nickel Plated Brass(4)
- Cast Iron(4)
Working Pressure
Size B
Body Size (In.)
Max. Parallel Misalignment (In.)
Max. Temp. (F)
Temp. Range
- -40 to 250 F(133)
- -200 to 250 F(63)
- 0 to 170 F(56)
- -20 To 400 Deg F(32)
- -20F to 180F(19)
- -65 To 250 Deg F(17)
- 65 To 250 Deg F(16)
- -4 Deg F To 140 Deg F(16)
- 40 to 210DF(14)
- -4 to 212 F(14)
- 0 To 180(11)
- -20 F to 150 F(11)
- 73 to 280DF(10)
- 0 to 200DF(9)
- -40 F to 225 F(9)
- 0 To 400 Deg F(8)
- -50 to 275 F(8)
- -425 To 1200 Deg F(7)
- -4 F to 212 F(7)
- -20 to 800DF(7)
- 0 to 210DF(4)
- 0 To 750 F(4)
- 0 To 140 Deg F(4)
- 0 to 250 F(3)
Size A
Seals
- Buna-N(133)
- HNBR(18)
- NBR(15)
- Nitrile Elastomer(9)
- Buna N(4)
Saturated Steam Pressure
- 150 PSI(130)
- 150 PSI WOG(28)
- 300 PSI(10)
Style
- Bellows Clamp(126)
- Threaded(68)
- With Stop(65)
- 4 Beam Set Screw(61)
- Double Disc Clamp(60)
- 4 Beam Clamp(60)
- 6 Beam Clamp(57)
- Socket(53)
- Oldham Clamp(49)
- Straight Tapped(41)
- Oldham Clamp with Keyway(30)
- Straight(24)
- Oldham Set Screw(22)
- Mini Disc Spacer Clamp(21)
- Without Stop(20)
- Double Beam Clamp(18)
- Double Shut-Off(17)
- Automatic(17)
- Socket - Threaded(15)
- Extra Strong - Recessed(14)
- Universal(13)
- Straight Expander(12)
- Single Beam Set Screw(12)
- Single Beam Clamp(12)
- Mold Coolant - 90[DEG] Stem(12)
- Rigid(11)
- Push-to-Connect(11)
- Part A(11)
- Oldham Coupling Disc(11)
- Mold Coolant - Straight Stem(11)
- Mold Coolant - 45[DEG] Stem(10)
- Extra Strong - Non-Recessed(10)
- Combination(10)
- Part F(9)
- Part B(9)
- Multi-Socket(9)
- Slip(8)
- Part C(8)
- Hydraulic - Double Shut-Off with Steel Poppets(8)
- Automatic Safety - Straight Body(8)
- Automatic - Flush Face, Double Shut-Off(8)
- Rigidlok[TRADEM](7)
- Dust Cap(7)
- Bulkhead(7)
- Swing(6)
- Single Shut-Off(6)
- Elastomeric(6)
- Compression(6)
- 4-Lug(6)
- Rigidlite[TRADEM](5)
- Pneumatic Automatic - Single Shut-Off(5)
- Part E(5)
- Part D(5)
- Manual - Double Shut-Off(5)
- Dust Plug(5)
- Taper Tapped(4)
- One Piece(4)
- Long Nose(4)
- Automatic Safety(4)
- Riser Extender(3)
- Oldham Clamp Style Insert(3)
- Mold Coolant - Body Only(3)
- High Flow(3)
Max. Axial Misalignment (In.)
Pressure (PSI)
- 300 For WOG, 150 For Saturated Steam(125)
- 125(56)
- 200(53)
- 3000(38)
- 500(31)
- 400(18)
- 1000(9)
- 400 PSI At 72 Deg F, 250 PSI At 400 Deg F For Steam(8)
- 300(8)
- 1200(8)
- 275 PSI @ 72 F(5)
- 250(4)
Application
- For flow-control applications(121)
- Use only on compressed air lines(111)
- Used on End of Hose or Tool Inlet for Connection to Quick Coupler(108)
- For hydraulic instrumentation(101)
- Concrete-Tight(72)
- Used on End of Hose or Air Supply for Connection to Hose or Tool(70)
- For cold and hot water applications(42)
- Potable water, HVAC and process water systems(38)
- Optimum speed and performance in connecting coolant lines to molds used for tooling(37)
- Connects two hose lines together(31)
- Industrial Hydraulic or Pneumatic(18)
- For medium working pressure tubing(18)
- Used in vacuum systems, steam, liquid, gases and other installations(17)
- Where Small Shaft Separations Restrict the Installation of a One-piece Insert(12)
- Provides rigid locked-in pipe connection(12)
- Plugs end for hazardous flow stoppage(11)
- Rain-Tight(10)
- For full range of hydraulic applications(10)
- Hose connections(9)
- For hydraulic service where fluid loss is undesirable(8)
- Agricultural, construction, forestry and snow plow applications(8)
- Forms a flexible grooved end pipe joint connection(7)
- For Low Cost, Low Pressure Suction and Discharge Hose Connections, for Use with Water and Other Compatible Liquids(7)
- Quick connects for compressed air lines(6)
- Industrial applications using pneumatics(6)
- For pneumatic tools, blowguns, pneumatic automotive equipment(6)
- For large pneumatic tools, main supply outlets, stamping equipment(6)
- General Industrial Purposes(5)
- Water systems(4)
- Transmitting Power for High Torque(4)
Color
Connection Size NPT (In.)
Temperature
Max. Pressure (PSI)
Standards
- Material Conforms To ASTM-A-351, Threads Conform To ANSME B1.20.1, Meets MSS-SP-114 Class 150 Pressure Ratings(92)
- UL: FM Approved: ASME B16.3(68)
- Class 150, ANSI B 16.39, Material Specification ASTM A-197, Dimensions Conform To Federal Specifications WW-P-521(68)
- MS27019(67)
- ASTM Certified(65)
- ASME/ANSI B16.22(62)
- UL: FM Approved: ASME B16.4(53)
- Dimension Specification ASME B16.11-1996, Material Specification ASTM A105(48)
- ASTM D1784, NSF-14 Certified(45)
- Dimension Specification MSS-SP-79-1999a, Material Specification ASTM A105(43)
- Meets ANSI Standards B1.20.1 Standards, Class 150(41)
- Class 150, ANSI B1.20.1 Specifications(40)
- ANSI B1.20.1 Specifications, Class 125, Bronze Meets ASTM B62(30)
- ASTM D-1784, NSF-14(27)
- UL(24)
- ASTM D-1784(24)
- Materials Conform To ASTM-A-182, F316, Dimensions Conform To ASME B16.11-1996, Threads Conform To ASME B1.20.1 NPT(22)
- Materials Conform To ASTM-A-182, F304, Dimensions Conform To ASME B16.11-1996, Threads Conform To ASME B1.20.1 NPT(22)
- NSF Certified(21)
- ANSI/ASTM A-197(21)
- ANSI B31.1, ANSI B31.3, ANSI B1.20.1(21)
- ASTM A-197, ASTM A47, ASME B16.3, B16.14, ASME B16.39 and ANSI B1.20.1(20)
- Materials Conform To ASTM-A-182, F316, Dimensions Conform To ASME B16.11-1996(19)
- Materials Conform To ASTM-A-182, F304, Dimensions Conform To ASME B16.11-1996(19)
- ASTM A307, ASTM A536, NSF 61, ASTMA53C(19)
- Class 300, ASTM 197, A197M(18)
- Class 300, ASME B16.3(18)
- API Specification 5L(18)
- ANSI B31.1, ANSI B31.9, NFPA 13(18)
- ABS(18)
- ASME B36.10M-2000, AVSI B36.19-1985(16)
- ANSI B 16.24, ANSI B 16.15(16)
- NSF/ANSI 61, UL, IAPMO, CSA, ABS, NFPA 13, 13D and 13R, ASTM(15)
- Cell Class 12454, ASTM D-1784(15)
- Materials Confrom To ASTM-A-182, F316, Dimensions Conform To MSS-SP-83-1995, Threads Conform To ASME B1.20.1 NPT(10)
- Material Conforms To ASTM-A-351, Threads Conform To ANSME B1.20.1, Meets MSS-SP-114(10)
- ASTM D-3222(10)
- Meets SAE, ASME, And ASA Requirements(9)
- Materials Confrom To ASTM-A-182, F316, Dimensions Conform To ASME B16.11-1996(9)
- Materials Confrom To ASTM-A-182, F304, Dimensions Conform To ASME B16.11-1996(9)
- Cell Class 32222 As Defined In ASTM D3965(9)
- ASTM D 2466(9)
- SAE, ASME, ASA(8)
- NSF 51, NSF 61(8)
- ASTM D 2657(8)
- ASME B.16.15, B1.20.1(8)
- ASTM D-2846(7)
- UL 6A, ANSI C80.5, B1.20.1(6)
- UL 6, ANSI C80.1, B1.20.1(6)
- NSF, UL, IAPMO, CSA, ABS(6)
- ASTM F877-F2159, NSF-pw, NSF 14 And 61(6)
- ASTM D1784, D2467(6)
- UL 1821, cNSF (R) us-pw, U.P. Code, UPC(R), ASTM F876/F877, ICC ES-PMG(TM)1015/1038(5)
- ASTM A581 And A582, NSF and FDA(5)
- ASTM-D26098, ASTM-D1784 Standard, NSF 51, 61 Listed(4)
- ASSE(4)
- ASTM A153, A47-77-32510 and OSHA(3)
- ANSI/ASTM B62(3)
Hose Connection
WOG (PSI)
Notes
- Copper x Copper(83)
- S x S. Schedule 80(48)
- FPT x FPT. Schedule 80(37)
- P x P(27)
- Tuthill coolant couplers are engineered for optumum speed and performance in connecting coolant lines to many types of tooling and equipment utilizing a constant fluid flow pumped through cooling channels(21)
- S x FPT. Schedule 80(18)
- SLIP x SLIP. Schedule 40(13)
- Non-valved straight-through models for maximum flowSockets with straight, 90[DEG] and 45[DEG] hose stems and without hose stemBrass plugs with male pipe thread to recessed mounting to avoid damage to plugs when molds are being changed or storedBrass socket constructionStainless steel springs and locking ballsViton seals (-30[DEG]F to +450[DEG]F)Brass and zinc-plated steel plugs(13)
- Traditional cost effective rigid coupling design.Provides torque transmission and alignment.Bore Sizes: 1/4" through 2"Available in: Aluminum, Stainless Steel, and Steel-Black Oxide Finish(12)
- Coupling assemblies consist of 3 pieces, 2 jaws, and 1 insert (spider)Fail-safe - will still perform if elastomer failsNo metal to metal contactResistant to oil, dirt, sand, moisture, and greaseThe Jaw Type couplings from Lovejoy are offered in the industry''s largest variety of stock bore/keyway combinationsThese couplings service for light, medium and heavy duty electrical motor and internal combustion power transmission applicationsCoupling HubsGray sintered iron (L050 to L150)Cast iron cons(12)
- Black in Color(12)
- Connects 2 shafts of equal or unequal diametersHigh axial load and torque capacity.Does not mar the shaft.Pilot Bore Sizes: 1/4" through 2"Available in: Stainless Steel, Steel-Black Oxide Finish(11)
- A versatile way to transition from hose to pipe, adapters, valves or strainersUse for bulk or fluid handling such as low pressure suction or dischargeAttach to hose with hose clamps or preformed band clampsNot for use with compressed air or steam(10)
- Simplify the world of quick disconnect couplers with the Alpha Multisocket, one coupler that works with the most common used plugs in the industry without leaking. Industrial Plug, Tru-Flate Plug, ARO Plug easy Automatic connection no leaks. The seal we use a captured lip type seal for superior sealing The body of the Multisocket is manufactured from nickel plated brass and the internal component are all stainless steel. What does all this mean to you? No leaks, No rust, no corrosion, and most(9)
- F x P(9)
- Temperature: -40[DEG]F to +225[DEG]FPressure Rating: 5000 psi(8)
- Industrial Interchange Profile(8)
- Coupler with Hardened Steel PoppetsDouble shut-off, general purposeTemperature: -40[DEG]F to +225[DEG]FPressure Rating: 3000 psi(8)
- Painted finish(7)
- Lovejoy ROSTA offers a complete line of multi-purpose elastomeric tensioners that can solve most types of tensioning, suspension, and vibration absorption problems in all fields of mechanical engineering.Easy to Install and maintenance freeNo LubricationSelf-adjusting convenienceProtective finish for long lifeCustomized solutions to tensioning, dampening, supporting or mounting problemsWill tension roller chains, v-belts or(6)
- Easy to Install and maintenance freeNo LubricationDampens Vibration and Controls ShockTorsionally SoftDouble EngagementThe simple design of the S-Flex coupling ensures ease of assembly and reliable performanceNo special tools are needed for installation or removal. S-Flex couplings can be used in a wide variety of applicationsUse 2 coupling flanges in conjunction with JE or H insert for a complete assembly(6)
- New design saves time and maintenance costsAllows insert to be replaced without moving either hubUse one ring plus one insert in place of standard spiderBlue urethane insert material has a shore hardness of 50D and a maximum temperature rating of 200[DEG]FRetaining ring is made from #347 cast stainless steelUse one insert and one ring in conjunction with 2 L-Series hubs for complete assembly(5)
- Restricted Area: CA and VT(4)
- Industrial Style, Maximum working pressure 300 PSI(4)
- Industrial Interchange ProfileLegris C9000 Safety Couplers(4)
- FIPT x FIPT. Schedule 40(4)
- Aro Style. Maximum working pressure 300 psi(4)
WOG PSI @ 150 F
Screw Size (In.)
- 1/4-28(82)
- 5/16-24(36)
- #6-32(17)
- #8-32(15)
- #10-32(15)
- 1/4-28 x 5/8(12)
- 1/4-20(10)
- 3/8-24(8)
- #4-40(8)
- 6-32(7)
- #2-56(6)
- 4-40(5)
- 3/8-16 x 3/8(5)
- 8-32(4)
- 5/16-18(4)
- 3/8-16(4)
- #8-32 x 1/2(4)
- #10-32 x 1/2(4)
Disc Type
- Stainless Steel(82)
- Polyacetel Insert(9)
- Acetal(6)
- Nylon(5)
Specification
- ASME B16.3(80)
- AISI(45)
- ASTM A865(44)
- ASTM B75(42)
- SAE 140138(32)
- NSF/ANSI 61(26)
- ASTM A536(19)
- SAE 140139(12)
- ASTM B 75, BS EN 681-1, ASTM B 16.22, and B16.18(12)
- ASTM A53M A733 ANSI B1.20.1(11)
- ASTM: A197; ANSI: B16.3, B16.14(9)
- SAE 130138, ASA, ASME(8)
- ISO 160.28(8)
- ASTM A197 ANSI B16.3 B16.14(8)
- SAE(7)
- ISO-14743(6)
- ISO 7241-1(5)
- NSF/ANSI 14, 61(4)
- API 5L(3)
Gasket Material
Meets
Outside Dia. (In.)
- 1.000(73)
- 0.750(65)
- 1.125(36)
- 1.625(34)
- 2.11(27)
- 1-3/4(26)
- 1-1/8(26)
- 1-1/2(26)
- 3.75(24)
- 7/8(23)
- 1.500(22)
- 1.313(22)
- 1-5/8(22)
- 2.250(21)
- 0.625(21)
- 1-5/16(19)
- 2.54(17)
- 2-5/8(17)
- 1.75(17)
- 2-1/2(16)
- 2.000(15)
- 2-1/16(15)
- 1-7/8(15)
- 1.260(14)
- 0.500(14)
- 5/8(13)
- 3.32(13)
- 1.250(12)
- 3-1/8(11)
- 1.08(11)
- 4.50(10)
- 0.748(10)
- 0.984(9)
- 3-3/8(8)
- 1.36(8)
- 1.102(8)
- 1.00(8)
- 4.625(7)
- 4.000(7)
- 2.480(7)
- 2.00(7)
- 0.75(7)
- 0.50(7)
- 5.450(6)
- 4.25(6)
- 3.000(6)
- 3.00(6)
- 2.50(6)
- 1/2(6)
- 1.575(6)
- 0.590(6)
- 3.250(5)
- 2.460(5)
- 1.969(5)
- 1.772(5)
- 1.50(5)
- 1.252(5)
- 7.500(4)
- 6.350(4)
- 6.00(4)
- 5.06(4)
- 4.34(4)
- 3.31(4)
- 2.062(4)
- 2-1/8(4)
Certified Vending
- Yes(72)
Resistant To
Pipe Size
- 1/2"(61)
- 3/4"(57)
- 2"(55)
- 1"(55)
- 1-1/2"(54)
- 1-1/4"(48)
- 3"(41)
- 1/4"(39)
- 3/8"(37)
- 4"(34)
- 2-1/2"(30)
- 1/8"(29)
- 3/4 x 1/2"(23)
- 2 x 1-1/2"(22)
- 1 x 3/4"(22)
- 1 x 1/2"(20)
- 1/2 x 3/8"(19)
- 1/2 x 1/4"(19)
- 3/8 x 1/4"(18)
- 1-1/2 x 1-1/4"(18)
- 2 x 1"(17)
- 1/4 x 1/8"(17)
- 1-1/4 x 1"(16)
- 3/4 x 3/8"(15)
- 3 x 2"(15)
- 1-1/2 x 1"(14)
- 4 x 3"(13)
- 2 x 1-1/4"(13)
- 3 x 2-1/2"(12)
- 2-1/2 x 2"(12)
- 1-1/2 x 3/4"(12)
- 1-1/2 x 1/2"(11)
- 3/4 x 1/4"(10)
- 2 x 3/4"(10)
- 1-1/4 x 3/4"(10)
- 4 x 2"(9)
- 3/8 x 1/8"(9)
- 2-1/2 x 1-1/2"(9)
- 1/2 x 1/8"(8)
- 3 x 1-1/2"(7)
- 2 x 1/2"(7)
- 1-1/4 x 1/2"(7)
- 3 x 1"(6)
- 1 x 3/8"(5)
- 3 x 1-1/4"(4)
- 2-1/2 x 1-1/4"(4)
- 2-1/2 x 1"(4)
Overall Length (In.)
- 1.50(48)
- 1.25(36)
- 0.90(32)
- 3(28)
- 2-1/4(25)
- 2(22)
- 1-3/8(21)
- 2-1/2(20)
- 1-3/4(20)
- 2.25(18)
- 2.000(18)
- 0.80(18)
- 2.5100(16)
- 3-7/8(15)
- 3-5/8(15)
- 3-1/8(15)
- 3-1/4(15)
- 2.313(15)
- 1.000(15)
- 1(13)
- 2.1300(12)
- 1.75(12)
- 1.313(12)
- 1.188(12)
- 4.5000(11)
- 3.4800(11)
- 4.50(10)
- 4-1/2(10)
- 3.100(10)
- 1.375(10)
- 0.75(10)
- 4.2200(9)
- 4-7/8(8)
- 1.614(8)
- 3.6875(7)
- 2.283(7)
- 1.875(7)
- 6.3125(6)
- 5.5000(6)
- 4.1250(6)
- 3.48(6)
- 2.165(6)
- 1.9800(6)
- 1.811(6)
- 1.770(6)
- 1.250(6)
- 4.8600(5)
- 2.7500(5)
- 2.480(5)
- 2.252(5)
- 2.13(5)
- 2.047(5)
- 1.7100(5)
- 1.60(5)
- 0.748(5)
- 4.25(4)
- 4.22(4)
- 2.626(4)
- 2.34(4)
- 1.496(4)
- 1.125(4)
- 1.102(4)
- 0.906(4)
-
Max. Working Pressure (PSI)
Length through Bore (In.)
- 0.750(48)
- 0.625(36)
- 0.450(32)
- 1.125(18)
- 0.400(18)
- 1.157(15)
- 0.875(12)
- 1.130(10)
- 1.000(10)
- 0.688(10)
- 0.657(10)
- 0.551(10)
- 0.375(10)
- 0.500(9)
- 0.710(8)
- 0.650(8)
- 1.840(7)
- 0.878(7)
- 0.590(7)
- 0.433(7)
- 0.276(7)
- 2.100(6)
- 1.310(6)
- 1.085(6)
- 0.885(6)
- 0.598(6)
- 0.594(6)
- 0.467(6)
- 1.060(5)
- 0.880(5)
- 0.764(5)
- 0.630(5)
- 0.472(5)
- 0.197(5)
- 2.70(4)
- 2.410(4)
- 0.81(4)
- 0.709(4)
- 0.390(4)
- 0.256(4)
- 0.236(4)
For Use With
- Industrial Interchange Coupler(48)
- Industrial Interchange Plug(39)
- Automotive Interchange Coupler(25)
- Pneumatic Tools. Blowguns, Automotive Equipment(16)
- Hi Flow Coupler(14)
- ARO Interchange Coupler(13)
- ARO, Industrial or Automotive Plug(12)
- Hi Flow Plug(8)
- Industrial Interchange Plugs(6)
- Chain(6)
- ARO, Industrial or Automotive Coupler(6)
- Chain Coupling(5)
- Global Hi-Flow Plug(4)
Bore Dia. (In.)
- 1/2(48)
- 5/8(39)
- 3/4(39)
- 7/8(38)
- 1(35)
- 1-1/8(30)
- 3/8(24)
- 1/4 x 1/4(24)
- 1-3/8(24)
- 1-1/4(23)
- 1-1/2(22)
- 3/8 x 3/8(20)
- 1/2 x 1/2(20)
- 5/16 x 5/16(17)
- 1/4(17)
- 1/2 x 3/8(17)
- 3/8 x 1/4(16)
- 3/16 x 3/16(13)
- 5/8 x 1/2(12)
- 5/16 x 1/4(12)
- 1-5/8(12)
- 5/16(11)
- 3/4 x 5/8(11)
- 3/4 x 1/2(11)
- 1/4 x 3/16(11)
- 1-3/4(11)
- 5/8 x 5/8(10)
- 3/8 x 5/16(10)
- 3/4 x 3/4(9)
- 2(9)
- 1-7/8(9)
- 3/16(8)
- 7/8 x 5/8(7)
- 7/16(7)
- 1 x 3/4(7)
- 1 x 1/2(7)
- 1/4 x 3/8(6)
- 1/2 x 5/16(6)
- 1-3/8 x 1(6)
- 1-1/8 x 1(6)
- 1-1/4 x 1(6)
- 1-1/2 x 1(6)
- 3/8 x 1/2(5)
- 3/16 x 1/8(5)
- 3/16 x 1/4(5)
- 1/8 x 1/8(5)
- 5/8 x 3/8(4)
- 5/8 x 3/4(4)
- 5/16 x 3/16(4)
- 3/16 x 5/32(4)
- 1/8(4)
- 1/2 x 1/4(4)
Keyway Width (In.)
- 1/8(46)
- 3/16(26)
- 1/4(21)
- 3/8(11)
- 5/16(6)
- 1/2(5)
- 3/32(4)
- 3/16 x 3/16(4)
- 3/16 x 1/8(4)
- 1/4 x 1/4(4)
Outside Dia. (mm)
Torsional Stiffness (Deg./In.-Lbs.)
Clearance Dia. (mm)
Performance
- Utility(41)
Hub Dia. (In.)
Additional Information
- None(39)
Keyway (In.)
- 3/16 x 3/32(37)
- 1/4 x 1/8(30)
- 3/8 x 3/16(15)
- 1/4X1/8(11)
- 5/16 x 5/32(10)
- 3/8X3/16(7)
- 3/16X3/32(6)
- 3/16(6)
- 1/8X1/16(5)
- 1/8 x 1/16(5)
- 1/8(4)
- 1/2X1/4(4)
- 1/2 x 1/4(4)
Clearance Dia. (In.)
Band Material
Weighted Average Lead Content
- 3% max(34)
- >0.25%(23)
- 0.25% - 3.70%(21)
- 2.5% - 3.7%(9)
- 3.7%(8)
- 3.1%(3)
- 2.5%(3)
Connection Type
- Male Barbed(34)
- Female NPT(28)
- Female NPTF(19)
- Male NPT(7)
- Barb(7)
- Female UNF(4)
Setscrew Location
Screw Material
- Steel(33)
- Stainless Steel(4)
Installation
- Threaded 3-Piece(33)
- Compression(31)
- Set-Screw(21)
- Threaded Split(4)
Ideal For
Collar Material
- Steel(32)
- Stainless Steel(5)
Collar Finish
- Black Oxide(32)
Features
Size
- 1-1/2"(30)
- 1"(30)
- 2"(29)
- 3"(26)
- L150(23)
- L110(21)
- L100(21)
- 1/2"(19)
- L095(18)
- 4"(17)
- 3/4"(17)
- L190(14)
- L090(13)
- L050(13)
- L099(10)
- L075(10)
- 1-1/4"(10)
- 3/8"(9)
- L225(8)
- BWC41(8)
- SS150(7)
- MDS63C(7)
- FC20(7)
- SS095(6)
- MDS40C(6)
- FC38(6)
- FC30(6)
- FC25(6)
- AL150(6)
- AL100(6)
- AL095(6)
- SS110(5)
- SS100(5)
- SS075(5)
- MDS50C(5)
- L070(5)
- FC15(5)
- BWLC63(5)
- AL075(5)
- AL050(5)
- ADB6(5)
- LO70(4)
- ES112(4)
- ES075(4)
- EC112(4)
- EC075(4)
- AL110(4)
- AL090(4)
- AL070(4)
- ADB7(4)
- 1/4"(4)
- MDS32C(3)
- LO95(3)
- FC45(3)
- FC12(3)
- ES100(3)
- EC100(3)
- ADB5(3)
- 8S(3)
- 3/8" NPT(3)
Torque (In.-Lbs.)
Nominal Size
Max. Torque (In.-Lbs.)
Overall Length (mm)
- 38.10(27)
- 22.90(25)
- 50(24)
- 45(20)
- 31.80(18)
- 20.30(16)
- 59(14)
- 30(14)
- 55.8(13)
- 51(13)
- 88.392(12)
- 40(12)
- 33(12)
- 107.188(11)
- 78.7(10)
- 63.754(10)
- 50.8(10)
- 35.3(10)
- 72.136(9)
- 47.6(9)
- 35(9)
- 30.20(9)
- 27(9)
- 22(9)
- 114.300(9)
- 95(8)
- 83(8)
- 75(8)
- 65(8)
- 54.610(8)
- 41(8)
- 19.10(8)
- 124(8)
- 108(8)
- 135.636(7)
- 58(6)
- 52(6)
- 46(6)
- 43.434(6)
- 31.8(6)
- 25.4(6)
- 63(5)
- 57.2(5)
- 19(5)
- 123.444(5)
- 66.7(4)
- 38(4)
- 28.6(4)
- 28(4)
- 23(4)
- 22.2(4)
- 15.9(4)
Max. Air Flow (SCFM)
Length through Bore (mm)
Min. Bore (mm)
Min. Bore (In.)
Hub Dia. (mm.)
Keyway (mm)
- 6.0 x 2.8(22)
- 8.0 x 3.3(21)
- 5.0 x 2.3(15)
- 10.0 x 3.3(10)
- 12.0 x 3.3(8)
- 5(6)
- 14.0 x 3.8(6)
Applications
- Â(22)
- Mold and Die couplings provide the flow needed to cool or heat injection molds and die casting dies. Sockets are available nonvalved for maximum flow. Couplings can be used with water-glycol, hot water and hot oil. Body sizes are 1/4", 3/8" and 1/2".1/4" Straight Through (Non-Valved) Couplers(13)
- Construction, Automotive/ Truck, Body Shops, Assembly Machinery, Robotics, Packaging Machinery, Food Processing, Semi-Conductor, Printing, Pulp & Paper, Injection Molding, Blow Molding, Bottling, Diary, Amusement Parks Any facility that uses air tools(10)
- Air automation equipment Connection of air tools and blow guns Hose extensions Ring main drops Pressure Control Manifold Piping Pneumatic Tools Pneumatic Piping Workstations General Air Service Assembly Lines Construction Agricultural Equipment Hydraulic Piping Petroleum Piping High-Temperature Fluid Service(6)
- Industrial Applications: C9000 is used for any application (assembly, construction, air craft industry, automotive) where safety, durability, and performance are demanded.(4)
Series
- 3/8" Industrial(21)
- 3/8" Automotive Standard(19)
- 1/4" Industrial Interchange(19)
- THK ISO "B"(17)
- 1/4" Automotive Standard(16)
- 1/4" Aro(16)
- MC300(14)
- MC200(14)
- C9000(13)
- 100 Aro 210 Interchange(12)
- 180 Industrial Interchange(10)
- MC500(9)
- 80(9)
- FE(8)
- 1/2" Automotive Standard(8)
- 1/2" Industrial Interchange(6)
- T4000(5)
- A5600, ISO A(5)
- PC4(4)
- E(4)
- 1/4" Lincoln(4)
Product Weight
- 0.5 lbs.(21)
- 0.1 lbs.(10)
- 0.25 lbs.(9)
- 0.2 lbs.(9)
- 0.11 lbs.(9)
- 0.3 lbs.(8)
- 0.15 lbs.(8)
- 2.5 lbs.(7)
- 1.6 lbs.(7)
- 0.75 lbs.(7)
- 0.4 lbs.(7)
- 0.35 lbs.(7)
- 0.18 lbs.(7)
- 0.06 lbs.(7)
- 1.8 lbs.(6)
- 0.55 lbs.(6)
- 0.22 lbs.(6)
- 0.03 lbs.(6)
- 1.4 lbs.(5)
- 1.0 lbs.(5)
- 0.45 lbs.(5)
- 0.39 lbs.(5)
- 0.27 lbs.(5)
- 0.23 lbs.(5)
- 0.07 lbs.(5)
- 0.04 lbs.(5)
- 2.09 lbs.(4)
- 2.0 lbs.(4)
- 1.55 lbs.(4)
- 1.5 lbs.(4)
- 1.3 lbs.(4)
- 0.9 lbs.(4)
- 0.88 lbs.(4)
- 0.82 lbs.(4)
- 0.402 lbs.(4)
- 0.26 lbs.(4)
- 0.21 lbs.(4)
- 0.13 lbs.(4)
- 0.05 lbs.(4)
- 0.02 lbs.(4)
Coupling Type
Grade
Flexible Material
- Bronze(20)
Fittings Material
- Brass(20)
Vacuum Rating
- 28"(19)
Bolt Material
- Carbon Steel(19)
Manufacturer Series
- None(18)
- Erickson (REG TM)(11)
- ECLK(10)
- ECGJH(10)
Gasket
- EPDM(18)
Color Code
Temp. Range (F)
- -20 to 160(17)
- -25 - 150(13)
- -40 to 120(6)
Hose Inner Diameter
Design
Conduit Size (In.)
Operating Temp.
Length
Hex Size
Weight Each (Oz.)
Max. Bore (mm)
Max. Bore (In.)
Trade Size
Bore Dia. (mm)
- 20(14)
- 25(13)
- 16(13)
- 15(13)
- 40(12)
- 30(12)
- 14(12)
- 35(11)
- 12(11)
- 10(11)
- 6.350 x 6.350(10)
- 8 x 8(9)
- 8(9)
- 6 x 6(9)
- 50(9)
- 5 x 4(9)
- 4 x 4(9)
- 9.525 x 9.525(8)
- 8 x 6(8)
- 12.700 x 12.700(8)
- 12 x 12(8)
- 5 x 5(7)
- 12.000(7)
- 10.000(7)
- 10 x 8(7)
- 10 x 10(7)
- 6.350 x 9.525(6)
- 3 x 3(6)
- 28(6)
- 24(6)
- 22(6)
- 19(6)
- 16.000(6)
- 14.000(6)
- 12 x 10(6)
- 10 x 6(6)
- 9.525 x 12.700(5)
- 8.000(5)
- 6.000(5)
- 6 x 5(5)
- 6 x 4(5)
- 6(5)
- 5 x 3(5)
- 4.775 x 6.350(5)
- 4 x 3(5)
- 12 x 8(5)
- 42(4)
- 38(4)
- 20.000(4)
- 19.050 x 19.050(4)
- 18(4)
- 15.875 x 19.050(4)
- 15.875 x 15.875(4)
- 14 x 14(4)
- 14 x 12(4)
- 12 x 6(4)
End Float Tolerance (In.)
- 0.060(13)
Barb Size
Screw Size
Pitch
- 40(12)
Min. Torque
Max. Torque
Keyway Width (mm)
Trade Size (in)
Set Screw Size
Max. Pressure
End Fittings
Body Style
Sprocket
Reducer Type
Rated Torque (In.-Lb.)
Motor Coupling Keyway (In.)
- 0.19 x 0.09(10)
Includes
Axial Load
Reducer Coupling Keyway (In.)
- 0.19 x 0.09(9)
Number of Bolts
Bolt Circle Dia. Flange to Motor (In.)
- 5.88(9)
Seating Torque
Bolt Size (In.)
- 3/8 x 2-3/4(8)
- 1/2 x 3(4)
Width (In.)
Pipe End Separation
Nut
- Swivel(7)
Max. Number of Teeth
- 16(7)
Length (In.)
Keyway Length (In.)
Height (In.)
HP Rating @ 100 RPM
- 0.90(7)
Flexible Length (in)
Clamp
Setscrew
- Yes(6)
Schedule/Series
- 40(6)
Outer Diameter
- 1-3/4"(6)
Motor Coupling Bore (In.)
- 0.63(6)
Insert Type
Insert Material
Bore Type
- Fixed(6)
Bore Size A
Bolt Size
- 1/2" x 14"(6)
- 1/2" x 7"(5)
Agency Compliance
Width
Thread Size
Lug
Keyway Size
- 3/16" x 3/32"(5)
- 1/4" x 1/8"(5)
Input Motor Frame Size
- 56C(5)
- 143TC/145TC(4)
For Pipe Size
Flow Rate
- 12 Gal/min(5)
Description/Special Features
Bore Size B
Small Hub (in)
- 0.75(4)
Size (In.)
Shaft Dia. (In.)
- 5/8(4)
Reducer Coupling Bore (In.)
- 0.63(4)
Overall Length
- 2.70"(4)
Overall Diameter
-
HP Rating @ 870 RPM
- 24.85(4)
HP Rating @ 690 RPM
- 19.71(4)
HP Rating @ 50 RPM
- 1.43(4)
HP Rating @ 3600 RPM
- 102.82(4)
HP Rating @ 3450 RPM
- 99.96(4)
HP Rating @ 300 RPM
- 8.57(4)
HP Rating @ 1800 RPM
- 51.41(4)
HP Rating @ 1750 RPM
- 49.98(4)
HP Rating @ 1200 RPM
- 34.27(4)
Coupler Pin
- Slip Fit(4)
Bore Size
Worm Center Distance (In.)
- 3.25(3)
Tube Size
14.
