washer
Narrow By
Categories
- belleville washer(62)
- beveled washer(66)
- bulk flat washer(118)
- captive washer(213)
- countersunk washer(73)
- cushioning washer(214)
- fender flat washer(87)
- fender washer(279)
- fill point id washer(60)
- flat sealing washer(158)
- flat washer(2,172)
- flat washers(132)
- id washer(60)
- lock washer(1,537)
- machine captive washer(213)
- machine screw washer(213)
- Nord-Lock, Inc. lock washer(66)
- Nord-Lock, Inc. washer(66)
- point id washer(60)
- pressure washer(78)
- screw / captive washer(213)
- screw washer(213)
- sealing and cushioning washer(214)
- sealing washer(251)
- shoulder washer(90)
- split lock washer(423)
- standard flat washer(119)
- structural washer(124)
- uss flat washer(61)
- washers(247)
Specification
Material
- Steel(2,248)
- Stainless Steel(603)
- 18-8 Stainless Steel(486)
- Low Carbon Steel(240)
- Nylon(171)
- 316 Stainless Steel(124)
- Nylon 6/6(90)
- Brass(90)
- Spring Steel(89)
- Case Hardened Steel(87)
- A2 Stainless (Comparable to 18-8 Stainless Steel)(56)
- PTFE(55)
- Silicon Bronze(51)
- Fiber(50)
- Malleable Iron(43)
- Neoprene(42)
- Aluminum(42)
- A2 Stainless Steel (Comparable to 18-8 Stainless Steel)(40)
- 410 Stainless Steel(38)
- EPDM(29)
- 1050 Through Hardened Steel(29)
- Thru Hard Steel(22)
- SBR with Inserted Cloth(22)
- High Alloy(20)
- Copper(20)
- 303 Stainless Steel(20)
- A4 Stainless Steel (Comparable to 316 Stainless Steel)(19)
- Phosphorus Bronze(17)
- A4 Stainless (Comparable to 316 Stainless Steel)(16)
- Variable Universal Life Fibre(15)
- Phenolic(14)
- Cork Rubber(14)
- Buna-N(14)
- Phosphorous Bronze(12)
- Viton(11)
- Spring Steel C 60(11)
- Silicone(11)
- Santoprene(11)
- Fluorosilicone(11)
- UHMW-PE(10)
- Alloy Steel(10)
- Acetal(10)
- Polyurethane(8)
- Neoprene Rubber Seal with 18-8 Stainless Steel Backing(8)
- Cast iron(8)
- Cast And Filled Nylon (8)
- 302 Stainless Steel(8)
- Polyimide Film(7)
- PVC(6)
- Nylatron(6)
- Medium Carbon Steel(6)
- BUNA-N (NBR) Rubber(6)
- Silicone Rubber Seal with 18-8 Stainless Steel Backing(5)
- Silicone Rubber O-Ring Seal with 18-8 Stainless Steel Backing(5)
Finish
- Plain(1,543)
- Zinc(1,041)
- Yellow Zinc(314)
- Natural(229)
- Black Oxide(191)
- Zinc-Flake (Delta Protekt[REG])(108)
- Hot Dipped Galvanized(92)
- Galvanized(84)
- Furnace Black(49)
- Chrome(47)
- White(41)
- Zinc Plated(33)
- Nickel(31)
- Mechanically Galvanized(31)
- Yellow Zinc Dichromate(29)
- Passivated(27)
- Mechanical Zinc(18)
- Black(15)
- Clear Zinc(10)
- Electro-plated(7)
- Black Phosphorus(5)
UNSPSC
Item
- Flat Washer(977)
- Split Lock Washer(402)
- Machine Screw w/Captive Washer(213)
- Sealing Washer(196)
- Lock Washer(191)
- Fender Washer(175)
- Shoulder Washer(90)
- Countersunk Washer(73)
- Fill Point ID Washer(60)
- Pressure Washer(39)
- Wave Washer(37)
- Washer(35)
- Spherical Washer(26)
- Parts Washer(26)
- Square Washer(25)
- Starter Motor(23)
- Square Beveled Washer(23)
- Push Nut(23)
- Conical Washer(22)
- Cushioning Washer(18)
- Retaining Washer(16)
- Spherical Washer Assembly(15)
- Bushing(15)
- Rivet Washer(13)
- Structural Flat Washer(12)
- Heavy Duty Flat Washer(9)
- Ogee Washer(8)
- Fiber Washer(7)
- Channel Washer(7)
- Low Profile Cord Connector Locknut(6)
- Hex Locknut(5)
Type
- Flat Washer(954)
- Lock Washer(890)
- Standard(771)
- Fender Washer(194)
- Flat(174)
- Thick(154)
- USS(124)
- Military Specification(95)
- SAE(91)
- Internal Tooth(89)
- Structural Flat Washer(80)
- Long Barrel(62)
- Belleville Washer(62)
- External Tooth(60)
- Heavy Duty(52)
- Load Indicating Washer(48)
- Light Duty(46)
- Extra Thick(46)
- Finishing Washer(44)
- Beveled Washer(43)
- Reducing(38)
- Extra Duty(36)
- Bonded Sealing Washer(36)
- Beveled(36)
- Hi Collar(34)
- Hardened(34)
- Slotted(30)
- Short Barrel(28)
- Rivet Back-Up Washer(25)
- Nonserrated(22)
- Bonded(22)
- Stainless(20)
- Large OD(20)
- Williams Washer(19)
- Square Outer Diameter Washer(19)
- Waffle(18)
- Jumbo(17)
- Split Lock Washer(15)
- Hillside Washer(14)
- Flat Round Washer(13)
- Internal/External Tooth(11)
- Conical Washer(11)
- Square Inner Diameter Washer(10)
- Non-metallic(10)
- External Serrated(10)
- High Strength(8)
- External Tooth, Countersunk(8)
- Wave Washer(7)
- Countersunk External Tooth(7)
- Structural Washer - Extra Thick(6)
- Square(6)
- Solvent(6)
- Internal Tooth, Heavy Duty(6)
- Electric, Hot Water, Oil-fired(6)
- Diamond(6)
- Aqueous(6)
- Structural Washer(5)
- Machine Screw with Conical Washer(5)
- Lavatory(5)
- Kitchen(5)
- Gas Engine(5)
- Strut Washer(4)
- Lavatory/Kitchen(4)
- Gas Engine, Hot Water, Oil-fired(4)
- Electric, Cold Water(4)
- Dock Washer(4)
Package Quantity
For Use With
- Screws and Studs(459)
- Die And Jig Fixture Setup(108)
- Machine Screw(88)
- Construction, Machinery(70)
- Large Round, Pan, or Binding Head Screws(66)
- Small Screw Heads(54)
- Nuts, Studs and Clamps(54)
- Screws and Bolts(52)
- Bolts and Nuts(48)
- Grade A/Grade 2 Bolts(41)
- 82D Flat and Oval Head Countersunk Screws(39)
- Property Class 8.8 And 10.9 Screws And Studs(37)
- Socket Head Cap Screws(31)
- Grade 8 Fastener(29)
- Welding, Construction, Machinery(24)
- Flat Socket Head Cap Screw(20)
- Small Screws(19)
- For Easy Installation And Removal Without Removing Nut Assembly(18)
- 82 Deg Flat and Oval Head Screws(10)
- Slip Nut(7)
- Flat and Oval Head Screws(7)
- Electronic Assembly(7)
- A325 and A490 Bolts(7)
- Solvent(6)
- Screws and Spikes(6)
- I-Sections(6)
- Heavy Bolts and Nuts(6)
- Grade 5 and 8 Bolts(5)
- Chicago Faucets(5)
- Bolts and Nuts Under High Loads(5)
- Aqueous(5)
Meets/Exceeds
- ASME B18.21.1(458)
- ANSI/ASME B18.13(213)
- DIN 125A(94)
- ANSI B18.22.1(93)
- DIN 127B(68)
- Grade 5(38)
- DIN 6797(38)
- ANSI B18.22.1 Rev 1981(36)
- MS15795(29)
- ASME/ANSI B 18.22 and ASTM F436(29)
- AN960(27)
- SAE(26)
- NAS1149(23)
- ASTM A47(23)
- DIN 6796(22)
- USS(20)
- DIN 9021B(20)
- ASTM F436(17)
- NAS620(16)
- DIN 7980(15)
- DIN 6798(10)
- DIN 125(8)
- DIN 435(6)
Rockwell Hardness
- B70(351)
- C38 to C46(224)
- B49(212)
- C40 to C50(82)
- C40(80)
- C35(62)
- C44 to C51(46)
- B40(35)
- 85 to 90 on 15N Scale(34)
- B90(27)
- Rc 38-45(26)
- B80(26)
- B55(22)
- C50(21)
- C46(21)
- B84(20)
- 27 on 15N Scale(20)
- B85 max(19)
- C43 to C49(16)
- C35 to C42(15)
- B85(13)
- C43 to C50(11)
- C38 to C45(11)
- B85 to C95(10)
- C26 to C45(9)
- B83 to B95(8)
- B68(8)
- B156 max(8)
- C38-C44(5)
- B75(5)
Color
Thickness Tolerance
- +/-0.010"(256)
- +/-0.005"(198)
- +/-0.020"(141)
- +/-0.20mm(56)
- +/-0.10mm(54)
- +/-0.015"(50)
- +0.010"(48)
- +/-0.025"(48)
- +0.006"(40)
- +/-0.030"(40)
- +/-0.010(39)
- +0.020"(34)
- +/-0.2mm(30)
- +/-0.30mm(28)
- +/-0.007(28)
- +0.4mm/-0.5mm(26)
- +0.4/-0.5mm(26)
- +/-0.031(22)
- +0.029"(21)
- +/-0.032"(18)
- +0.020/-0.010"(17)
- +/-0.003"(17)
- +/-0.016"(16)
- +/-0.3mm(15)
- +/-0.15mm(15)
- +/-0.016(15)
- +/-0.05mm(14)
- +/-0.006"(14)
- -0.015"(13)
- +/-0.008"(12)
- +/-0.027"(10)
- -0.006"(9)
- +0.030"(9)
- +/-0.035"(9)
- +/-0.013"(9)
- -0.009"(8)
- +/-0.60mm(8)
- +/-0.03"(8)
- +0.027/-0.029"(7)
- +0.015/-0.014"(7)
- +/-0.001"(7)
- 0.064 to 0.104"(6)
- +0.014/-0.015"(6)
- +/-0.026"(6)
- +/-0.023"(5)
- 0.055 to 0.065"(4)
- 0.034 to 0.028"(4)
- 0.028 to 0.023"(4)
- 0.024 to 0.018"(4)
- 0.023 to 0.018"(4)
- 0.022 to 0.016"(4)
- 0.018 to 0.012"(4)
- -0.022"(4)
- +0.033/-0.027"(4)
- +0.016/-0.013"(4)
- +/-1.2mm(4)
- +/-0.004"(4)
Style
- Medium Split(235)
- Vibration Resistant(223)
- USS(154)
- SAE(149)
- Small OD(116)
- Split(101)
- High Collar(95)
- Internal Tooth(85)
- External Tooth(82)
- Type A(74)
- Extra Heavy(59)
- Large OD(52)
- SAE Thru-Hardened(49)
- Heavy Split(44)
- USS Thru-Hardened(37)
- Disc Spring(34)
- Round(21)
- Beveled(18)
- Small OD Extra Thick(13)
- Internal/External Tooth(11)
- Square ID(10)
- Countersunk External Tooth(7)
- Machine Screw(6)
- Light Split(6)
- Extra Thick Thru-Hardened(6)
- Square(5)
- Small OD Thick(5)
- Square Washer(4)
Application
- Load Distributing(231)
- Cushioning, Sealing and Vibration Resistant(209)
- Absorbs Shock and Vibration(125)
- General Purpose(118)
- Used For Insulating(90)
- Relieves Friction(88)
- For Finished Appearance(73)
- Helps Prevent Loosening(67)
- For General Purpose(56)
- Clamping(54)
- Bearing Surface for Fasteners and Fixtures(51)
- Used for Structural Leveling(24)
- For Use with Short Bolts Predominantly Subject to Thrust(22)
- Wear Resistant(18)
- Washer Retention, Pre-Assembly, Kitting(16)
- Used to Compensate for Uneven Surfaces(16)
- For Confined Areas(16)
- Stud Retention(15)
- Solvent Resistant(15)
- Sheet Metal, Plumbing, Electrical Work(14)
- Insulating, Reduces Friction(13)
- Concrete(13)
- Abrasion and Chemical Resistant(10)
- Bolt Retention(8)
- Insulating(7)
- Hi-Temp, Electrical Insulator(7)
- For 82D Countersunk Screws(7)
- Used for Structural Leveling with Bolts up to Property Class 5.6 Steel(6)
- For Sheet Metal, Plumbing, Electrical Work(6)
- For Castings and Heavy Machinery(6)
- Used for Structural Bolting(5)
- To Reduce Vibration(5)
- Cushioning and Sealing(5)
Grade
Head Type
Fits Bolt Sizes
- 1/4" (199)
- 3/8"(170)
- 5/16"(155)
- 1/2"(149)
- #10(145)
- #8(117)
- 3/4"(115)
- 5/8"(114)
- #6(106)
- 1"(99)
- #4(79)
- 7/8"(65)
- 7/16"(65)
- #2(44)
- 1-1/4"(41)
- M6(39)
- #12(39)
- 9/16"(35)
- M10(34)
- 1-1/8"(34)
- M8(33)
- M12(32)
- 1-1/2"(31)
- M5(29)
- M16(29)
- M4(28)
- M3(25)
- M20(24)
- #5(20)
- M24(19)
- M14(18)
- #3(18)
- 1-3/8"(17)
- M2(13)
- M30(11)
- M2.5(11)
- M18(11)
- 2"(11)
- 3/16"(10)
- 1-3/4"(9)
- #0(9)
- M3.5(8)
- M36(7)
- 3"(6)
- 2-1/2"(6)
- M2.6(5)
Drive Type
Nominal Size
- 1/2"(174)
- 3/8"(172)
- 1/4"(166)
- 5/16"(144)
- 5/8"(132)
- 3/4"(125)
- #10(99)
- 7/8"(89)
- 1"(86)
- 7/16"(80)
- #8(76)
- #6(65)
- 1-1/4"(52)
- #12(51)
- 1-1/8"(48)
- 9/16"(47)
- 1-1/2"(47)
- #4(47)
- M6(39)
- M12(39)
- M10(38)
- M8(30)
- M5 (30)
- M16(30)
- M20(29)
- 1-3/8"(27)
- M4(25)
- M18(23)
- M14(22)
- 2"(21)
- M3(20)
- M24(20)
- 1-3/4"(20)
- #2(17)
- #6/M3.5(15)
- 1-1/8"/M30(14)
- #5(14)
- M27(13)
- 9/16"/M14(13)
- 7/8"/M22(13)
- #10/M5(13)
- M30(12)
- M22(12)
- #8/M4(12)
- 5/16"/M8(11)
- 3/16"(11)
- M7(10)
- M42(9)
- M2(9)
- 5/8"/M16(9)
- 1-7/8"(9)
- 1-5/8"(9)
- M36(8)
- 2-1/2"(8)
- M2.5(6)
- 3"(6)
- 1-1/4"/M33(6)
- 1-1/2"/M39(6)
- #5/M3(6)
- 7/16"/M11(5)
- 1-3/8"/M36(5)
- #3(5)
Nominal Thickness
- 0.062"(160)
- 0.125"(83)
- 0.040"(69)
- 0.031"(64)
- 0.177"(63)
- 0.130"(63)
- 0.065"(62)
- 0.165"(57)
- 0.134"(44)
- 0.032"(43)
- 0.180"(42)
- 0.090"(37)
- 0.250"(36)
- 0.083"(36)
- 1.60mm(34)
- 0.109"(34)
- 0.078"(30)
- 0.070"(29)
- 0.100"(28)
- 0.095"(28)
- 2.50mm(25)
- 0.270"(23)
- 0.080"(23)
- 0.047"(22)
- 0.025"(21)
- 3.00mm(20)
- 0.094"(20)
- 1/4"(19)
- 0.102"(19)
- 0.020"(18)
- 0.260"(17)
- 0.156" (17)
- 0.093"(17)
- 0.050"(17)
- 0.049"(17)
- 0.060"(16)
- 0.018"(16)
- 3mm(15)
- 3.50mm(15)
- 0.80mm(15)
- 0.188"(15)
- 1.20mm(14)
- 0.50mm(14)
- 0.028"(14)
- 0.015"(14)
- 3.30mm(12)
- 2mm(12)
- 1.80mm(12)
- 0.90mm(12)
- 0.280"(12)
- 0.219"(12)
- 0.160"(12)
- 0.148"(12)
- 0.116"(12)
- 0.056"(12)
- 0.023"(12)
- 4.30mm(11)
- 2.20mm(11)
- 0.091"(11)
- 0.016"(11)
- 1mm(10)
- 0.422"(10)
- 0.375"(10)
- 0.141"(10)
- 6mm(9)
- 5mm(9)
- 4mm(9)
- 0.187"(9)
- 0.022"(9)
- 0.012"(9)
- 2.70mm(8)
- 0.140"(8)
- 0.045"(8)
- 0.030"(8)
- 7mm(7)
- 0.389"(7)
- 0.281"(7)
- 0.146"(7)
- 0.024"(7)
- 4.50mm(6)
- 2.00mm(6)
- 1.10mm(6)
- 0.60mm(6)
- 0.081"(6)
- 0.046"(6)
- 0.034"(6)
- 4.00mm(5)
- 0.55mm(5)
- 0.312"(5)
- 0.310"(5)
- 0.238"(5)
- 0.172"(5)
- 0.128"(5)
- 0.120"(5)
- 0.115"(5)
- 0.055"(5)
- 0.042"(5)
- 0.037"(5)
- 0.036"(5)
Specification
- DIN 125(145)
- DIN 127(101)
- ASTM F436(96)
- Made in USA(82)
- ASTM F959(48)
- DIN 7980(36)
- DIN 6797(36)
- ANSI B18.23.1(28)
- DIN 9021(27)
- ASTM F 48-94(14)
- DIN 6916(8)
- DIN 137(7)
- ANSI B18.22.1(7)
- DIN 121(5)
Thickness
- 0.062"(143)
- 1/4"(86)
- 0.031"(69)
- 0.125"(66)
- 1/8"(56)
- 0.093"(53)
- 0.047"(48)
- 0.040"(48)
- 3mm(44)
- 0.0625"(42)
- 3/16"(37)
- 5/64"(36)
- 2.5mm(34)
- 1.6mm(34)
- 0.078"(32)
- 0.025"(32)
- 0.050"(30)
- 2mm(29)
- 1/16"(29)
- 5/32"(27)
- 5mm(26)
- 0.098" - 0.122"(26)
- 0.051"(26)
- 9/64"(25)
- 0.063"(25)
- 0.051 to 0.080"(25)
- 3/32"(24)
- 0.8mm(24)
- 0.065"(24)
- 0.045"(24)
- 4mm(23)
- 0.020"(22)
- 7/64"(21)
- 5/16"(21)
- 0.156"(21)
- 0.028"(21)
- 3/8"(20)
- 0.032"(20)
- 3.5mm(19)
- 0.312"(19)
- 0.010"(19)
- 0.270"(18)
- 0.098"(18)
- 0.015"(17)
- 9/32"(16)
- 0.5mm(16)
- 0.094"(16)
- 11/64"(15)
- 0.136 to 0.177"(14)
- 0.071"(14)
- 1mm(13)
- 0.180"(13)
- 3/64"(12)
- 1/8(12)
- 0.250"(12)
- 0.064 to 0.104"(12)
- 0.036 to 0.065"(12)
- 0.028 to 0.036"(12)
- 1.2mm(11)
- 0.136 to 0.192"(11)
- 0.034"(11)
- 0.022"(11)
- 0.005"(11)
- 3/16(10)
- 0.188"(10)
- 0.108 to 0.160"(10)
- 0.016"(10)
- 0.6mm(9)
- 0.039"(9)
- 0.500"(8)
- 0.375"(8)
- 0.340"(8)
- 0.220"(8)
- 0.122 to 0.177"(8)
- 0.109"(8)
- 0.053 to 0.073"(8)
- 0.023"(8)
- 0.022 to 0.042"(8)
- 7/32"(7)
- 0.4 to 0.8mm(7)
- 0.165"(7)
- 0.141"(7)
- 0.057 to 0.069"(7)
- 0.056"(7)
- 0.029 to 0.035"(7)
- 0.014 to 0.018"(7)
- 7/16"(6)
- 6.5mm(6)
- 5/64(6)
- 2.2mm(6)
- 1/2"(6)
- 1 to 2mm(6)
- 0.560"(6)
- 0.496"(6)
- 0.458"(6)
- 0.422"(6)
- 0.281"(6)
- 0.280"(6)
- 0.240"(6)
- 0.219"(6)
- 0.160"(6)
- 0.134"(6)
- 0.115"(6)
- 0.110"(6)
- 0.100"(6)
- 0.035"(6)
- 0.021"(6)
- 0.019"(6)
- 6mm(5)
- 0.5 to 1mm(5)
- 0.3mm(5)
- 0.344"(5)
- 0.230"(5)
- 0.157 to 0.468"(5)
- 0.097 to 0.121"(5)
- 0.086 to 0.132"(5)
- 0.060"(5)
- 0.059"(5)
- 0.055"(5)
- 0.024"(5)
- 0.017"(5)
- 0.013"(5)
- 0.006 to 0.026"(5)
- 5/32(4)
- 5/16(4)
- 1/4(4)
- 1/2(4)
- 1.5mm(4)
- 0.9mm(4)
- 0.440"(4)
- 0.384"(4)
- 0.380"(4)
- 0.370"(4)
- 0.220 to 0.560"(4)
- 0.202"(4)
- 0.152"(4)
- 0.120 to 0.340"(4)
- 0.112"(4)
- 0.074 to 0.121"(4)
- 0.049"(4)
- 0.030"(4)
- 0.029"(4)
- 0.012"(4)
- 0.008"(4)
- 0.006"(4)
Driver Size
Washer Material
- C1050-C1065 Steel(111)
- 410 Stainless Steel(82)
Temp. (F)
- -40 to 185(110)
- 400(54)
- -20 to 170(30)
- 180(21)
- -35 to 250(21)
- -20 to 190(21)
- 0 to 200(20)
- 220(15)
- 0 to 350(14)
- -40 to 180(14)
- -25 to 200(14)
- -45 to 250(12)
- 0 to 400(11)
- -75 to 375(11)
- -65 to 450(11)
- -100 to 275(11)
- 210(10)
- 200(10)
- -40 to 225(8)
- 425(7)
- -10 to 200(6)
- -160 to 500(5)
- -100 to 500(5)
Outside Dia.
- 2"(106)
- 1"(70)
- 3/4"(50)
- 1-1/2"(49)
- 1-1/4"(45)
- 0.250"(41)
- 3"(39)
- 1-3/4"(37)
- 0.312"(36)
- 5/8"(35)
- 0.500"(33)
- 2-1/2"(32)
- 0.625"(32)
- 7/8"(30)
- 1/2"(30)
- 0.375"(30)
- 3/8"(26)
- 2-1/4"(25)
- 1.500"(24)
- 1-3/8"(24)
- 0.562"(23)
- 0.750"(20)
- 9/16"(17)
- 12mm(17)
- 11/16"(17)
- 7/16"(16)
- 1.062"(16)
- 1-1/16"(16)
- 24mm(15)
- 18mm(15)
- 16mm(15)
- 0.260"(15)
- 2.000"(14)
- 13/16"(14)
- 1-1/8"(14)
- 30mm(13)
- 1.312"(13)
- 1-5/16"(13)
- 0.437"(13)
- 8mm(12)
- 5/16"(12)
- 2-3/4"(12)
- 10mm(12)
- 0.875"(12)
- 0.680"(12)
- 0.487"(12)
- 0.209"(12)
- 9mm(11)
- 3-1/4"(11)
- 1-5/8"(11)
- 0.812"(11)
- 0.438"(11)
- 0.381"(11)
- 7mm(10)
- 44mm(10)
- 28mm(10)
- 20mm(10)
- 11mm(10)
- 1.750"(10)
- 1.265"(10)
- 1.073"(10)
- 0.869"(10)
- 0.687"(10)
- 0.583"(10)
- 0.510"(10)
- 0.360"(10)
- 0.205"(10)
- 59/64"(9)
- 56mm(9)
- 3-1/2"(9)
- 37mm(8)
- 2.500"(8)
- 15mm(8)
- 14mm(8)
- 0.900"(8)
- 0.610"(8)
- 0.334"(8)
- 0.145"(8)
- 6mm(7)
- 5mm(7)
- 40mm(7)
- 22mm(7)
- 2.250"(7)
- 1.000"(7)
- 0.965"(7)
- 0.478"(7)
- 0.170"(7)
- 50mm(6)
- 4-1/2"(6)
- 4"(6)
- 34mm(6)
- 26mm(6)
- 19/32"(6)
- 18.1mm(6)
- 17/32"(6)
- 11.8mm(6)
- 1.847"(6)
- 1.656"(6)
- 1.459"(6)
- 1-3/16"(6)
- 0.776"(6)
- 0.760"(6)
- 0.692"(6)
- 0.410"(6)
- 0.320"(6)
- 0.293"(6)
- 0.120"(6)
- 7/8(5)
- 5/8(5)
- 47/64"(5)
- 27.4mm(5)
- 25mm(5)
- 21.1mm(5)
- 2.419"(5)
- 2.036"(5)
- 14.8mm(5)
- 1.375"(5)
- 1.260"(5)
- 1.250"(5)
- 1-5/8(5)
- 1-3/8(5)
- 1-15/32"(5)
- 1-1/8(5)
- 0.340"(5)
- 0.270"(5)
- 0.236"(5)
- 0.220"(5)
- 0.218"(5)
- 9.2mm(4)
- 7.6mm(4)
- 6.7mm(4)
- 6.2mm(4)
- 5.5mm(4)
- 5.1mm(4)
- 5-1/2"(4)
- 4.4mm(4)
- 35mm(4)
- 33.6mm(4)
- 3/16"(4)
- 29/64"(4)
- 29.4mm(4)
- 25/32"(4)
- 24.1mm(4)
- 23mm(4)
- 20.5mm(4)
- 2(4)
- 1/4"(4)
- 1.188"(4)
- 1-3/4(4)
- 0.683"(4)
- 0.609"(4)
- 0.607"(4)
- 0.575"(4)
- 0.406"(4)
- 0.281"(4)
- 0.195"(4)
- 0.187"(4)
- 0.172"(4)
- 0.156"(4)
Notes
- Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Zinc plating, retards the corrosion rate in a normal atmosphere.(104)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Plain Finish, or bare metal finish which may contain a light coating of oil.(103)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.(86)
- Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening. Stainless Steel material.(78)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Stainless Steel material.(68)
- Also known as Plaster washers these special sized washers have an extra-wide bearing size for screw heads to eliminate the need for patching holes. This also permits the using of smaller size screws than might otherwise be needed. Zinc plating, retards the corrosion rate in a normal atmosphere.(63)
- When the bolt and/or nut is tightened the teeth grip, seat the mating surfaces and lock preventing the washers from slipping(47)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.(47)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Zinc plating, retards the corrosion rate in a normal atmosphere.(44)
- The Delta Protekt finished Nord-Lock system consists of a pair of washers with a wedge-locking action, which is a unique method that uses tension instead of friction. The key is the difference in angles. Since the angle "a" is larger than the angle "B" , the pair of washers expand more than the corresponding pitch of the thread. Nord-Lock washers positively lock the fastener in a joint which is subjected to extreme vibration or dynamic loads. This unique bolt securing system uses tension to mak(42)
- Also known as Plaster washers these special sized washers have an extra-wide bearing size for screw heads to eliminate the need for patching holes. This also permits the using of smaller size screws than might otherwise be needed. Stainless Steel material.(42)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. PTFE has the lowest coefficient of friction of all non-metallic materials. It has great chemical resistance. It is soft and creates a good seal. Pure white in color, continuous heat resistance 350[DEG]F to 500[DEG]F.(41)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Vulcanized fiber washers are useful as electrical insulators. Fiber can also be used in light sealing applicators. Continuous heat resistance of 110[DEG]C.(36)
- Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Stainless Steel material.(34)
- These washers are specially designed for use with socket head cap screws and where there are space limitations. The smaller outer diameter accommodates confined areas, while the increased thickness sustains the washers overall locking effectiveness. Zinc plating, retards the corrosion rate in a normal atmosphere.(33)
- A disc spring (sometimes called a "Belleville washer" after the inventor) consists primarily of a convex disc supported at the outer periphery by one force and an opposing force on the center of the disc. Disc springs are used singly, or in stacks, to achieve a desired load and travel. The advantage of a disc spring is that it generates high force in a very short spring length and with minimal movement when compressed. All discs are preset so that they will not significantly relax under load ov(31)
- These washers are specially designed for use with socket head cap screws and where there are space limitations. The smaller outer diameter accommodates confined areas, while the increased thickness sustains the washers overall locking effectiveness. Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.(30)
- Structural Washers to be used with A325 and A490 Structural Bolts. Plain Finish, or bare metal finish which may contain a light coating of oil.(30)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than clear Zinc.(30)
- High-strength washers are designed for use with Grade 5 and Grade 8 cap screws, these washer are made from top quality, medium carbon steel. They are through hardened to a Rockwell C scale of 38-45. Plain Finish, or bare metal finish which may contain a light coating of oil.(29)
- Structural Washers to be used with A325 and A490 Structural Bolts. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(28)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Nylon is lightweight, non-magnetic, non-corrosive, non-toxic, non-flammable, non-abrasive and non-conductive.(28)
- Use external tooth lock washers when you need maximum holding power in a washer. Team them up with fasteners having heads large enough to make contact with the washer teeth. Examples include: round head, pan head and binding head. Zinc plating, retards the corrosion rate in a normal atmosphere.(27)
- Internal tooth lock washers work best with small screw heads. Use them to prevent snagging or scratching and where appearance warrants that the teeth be hidden. Teeth lock into screw head or nut to prevent loosening. Stainless Steel material.(27)
- The Nord-Lock system consists of a pair of washers with a wedge-locking action, which is a unique method that uses tension instead of friction. The key is the difference in angles. Since the angle "a" is larger than the angle "B" , the pair of washers expand more than the corresponding pitch of the thread. Nord-Lock washers positively lock the fastener in a joint which is subjected to extreme vibration or dynamic loads. This unique bolt securing system uses tension to make the bolt self-locking(26)
- These safety washers are in the form of a disc spring which is serrated on both sides and of trapezoidal cross section. Their diameters are matched to screw dimensions. The outer diameter of the washer is matched to the head diameter of pan-head and hexagon socket head cap screws. As a result, the safety washer can be used with practically any screw and bolt type, including those with rescessed heads. The only exception are countersunk screws(24)
- Back-up washers are .056"-.062" thick. They are used when fastening soft materials or to compensate for oversize holes where access to both sides of the work is possible.(21)
- Use external tooth lock washers when you need maximum holding power in a washer. Team them up with fasteners having heads large enough to make contact with the washer teeth. Examples include: round head, pan head and binding head; Bronze is typically used in outdoor applications.(20)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Brass is basically 2/3 copper and 1/3 zinc. It is nonmagnetic with high electrical conductivity. It has good corrosion resistance. Brass is commonly used by electrical and communications industries, builders hardware and some marine applications.(20)
- Heavy Pattern Split Lock washers are designed to be thicker than the average washer. Washers also freature larger outside diameter. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than clear Zinc.(19)
- Internal tooth lock washers work best with small screw heads. Use them to prevent snagging or scratching and where appearance warrants that the teeth be hidden. Teeth lock into screw head or nut to prevent loosening. Zinc plating, retards the corrosion rate in a normal atmosphere.(18)
- Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(17)
- Heavy Pattern Split Lock washers are designed to be thicker than the average washer. Washers also freature larger outside diameter. Plain finish, or bare metal, may or may not have a coating of light oil to resist corrosion.(16)
- High-strength washers are designed for use with Grade 5 and Grade 8 cap screws, these washer are made from top quality, medium carbon steel. They are through hardened to a Rockwell C scale of 38-45. Zinc plating, retards the corrosion rate in a normal atmosphere.(15)
- Use external tooth lock washers when you need maximum holding power in a washer. Team them up with fasteners having heads large enough to make contact with the washer teeth. Examples include: round head, pan head and binding head. Stainless Steel material.(14)
- These washers provide a finished appearance. Use with standard 82[DEG] flat-and oval-head countersunk screws. Stainless Steel material.(14)
- Often referred to as "Direct Tension Indicators", Load Indicating Washers are a simple, accurate, and cost effect method for installing structural bolts to their specified tension. Plain Finish, or bare metal finish which may contain a light coating of oil.(14)
- Hillside washers are specially designed for shimming and leveling in structural applications. Use with American standard beams and channels that have 1: 6 slope (the same taper as a standard I-beam). Harden steel washers conform to ASTM F 48-94. They are suitable for use with A325/A490 structural bolts. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(14)
- DTIs are Direct Tension Indicators with a flexible silicone embedded in the depressions under the bumps. As the bumps in the steel DTI washer are compressed by the action of tightening the bolt, the silicone is squirted out and becomes a visible indicator of correct bolt tension. Plain Finish, or bare metal finish which may contain a light coating of oil.(14)
- These heavy duty Yellow Zinc Chromate washers are designed for tough applications. Use primarily with Grade 8 nut and bolt assemblies. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than clear Zinc.(13)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Slicone Bronze is typically used in outdoor applications.(13)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Galvanized plating, made of layers of zinc-iron, protects the bolt from corrosion; typically used in outdoor applications(13)
- Square Washers are used most often in channel applications. Square washers offer a large surface, but do require more effort to hold into place. Galzanized plating, made of layers of zinc-iron, protects the bolt from corrosion; typically used in outdoor applications.(12)
- Flat washers are used typically under the head of a bolt or a nut to distribute the forces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. HV200 Washers are medium-hard. Hardened to approximately HRB 91.5. Zinc plating, retards the corrosion rate in a normal atmosphere.(12)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. HV200 Washers are medium-hard. Hardened to approximately HRB 91.5. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.(12)
- High-strength washers are designed for use with Grade 5 and Grade 8 cap screws, these washer are made from top quality, medium carbon steel. They are through hardened to a Rockwell C scale of 38-45. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(11)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Slicone Bronze is typically used in outdoor applications.(11)
- Extra thick case hardened steel with a beveled edge. Plain Finish, or bare metal finish which may contain a light coating of oil.(11)
- Also known as contact Bellevilles, these washers hold tight where heat or vibration might shake standard washer loose. As the joint of the nut and bolt loosens over time, the washer deflects, maintaining constant pressure on the bolt and nut to prevent further loosening. Plain Finish, or bare metal finish which may contain a light coating of oil.(11)
- Washers feature a large bearing surface for spanning oversize and elongated holes. Teeth on both sides allow the washers to also be used as an insert between two adjustable pieces to maintain their position after original setting. Zinc plating, retards the corrosion rate in a normal atmosphere.(10)
- Use external tooth lock washers when you need maximum holding power in a washer. Team them up with fasteners having heads large enough to make contact with the washer teeth. Examples include: round head, pan head and binding head. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than clear Zinc.(10)
- These washers are specially designed for use with socket head cap screws and where there are space limitations. The smaller outer diameter accommodates confined areas, while the increased thickness sustains the washers overall locking effectiveness. Stainless Steel material.(10)
- Structural Washers to be used with A325 and A490 Structural Bolts. Zinc plating, retards the corrosion rate in a normal atmosphere.(10)
- Square beveled washers are specially designed for shimming and leveling in structural applications. Use with American standard beams and channels that have 1: 6 slope (the same taper as a standard I-beam). Plain Malleable washers are for general applications. Plain Finish, or bare metal finish which may contain a light coating of oil.(10)
- Square Washers are used most often in channel applications. Square washers offer a large surface, but do require more effort to hold into place. Plain Finish, or bare metal finish which may contain a light coating of oil.(10)
- Often referred to as "Direct Tension Indicators", Load Indicating Washers are a simple, accurate, and cost effect method for installing structural bolts to their specified tension. Galzanized plating, made of layers of zinc-iron, protects the bolt from corrosion; typically used in outdoor applications.(10)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. HV200 Washers are medium-hard. Hardened to approximately HRB 91.5. Plain Finish, or bare metal finish which may contain a light coating of oil.(10)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Copper material has a high electrical conductivity rate than any of the non-precious metals and is therefore used in many electrical applications; when used as plating it produces an excellent durable surface.(10)
- Internal tooth lock washers work best with small screw heads. Use them to prevent snagging or scratching and where appearance warrants that the teeth be hidden. Teeth lock into screw head or nut to prevent loosening. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than clear Zinc.(9)
- Structural Washers to be used with A325 and A490 Structural Bolts. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.(8)
- Square beveled washers are specially designed for shimming and leveling in structural applications. Use with American standard beams and channels that have 1: 6 slope (the same taper as a standard I-beam). Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(8)
- Sealing washers help seal joints, prevent leakage and cushion under the head of the bolt or nut. Rubber is bonded to a washer to form a washer that is strong, yet soft and resilient enough to use with fragile materials. Galzanized plating, made of layers of zinc-iron, protects the bolt from corrosion; typically used in outdoor applications.(8)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Aluminum is suprisingly strong because it work hardens as it is formed into screws; provides high corrosion resistance.(8)
- Zinc plated washers feature external teeth angled at 82[DEG] for use with flat and oval head screws in countersunk holes. The teeth lock into the screw head to prevent loosening. Zinc plating, retards the corrosion rate in a normal atmosphere.(7)
- Square Washers are used most often in channel applications. Square washers offer a large surface, but do require more effort to hold into place. Stainless Steel material, because of the presence of chromium, creates an invisible surface film that resists oxidation and makes the material "passive" or corrosion resistant.(7)
- DTIs are Direct Tension Indicators with a flexible silicone embedded in the depressions under the bumps. As the bumps in the steel DTI washer are compressed by the action of tightening the bolt, the silicone is squirted out and becomes a visible indicator of correct bolt tension. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(7)
- Also known as spring washers, wave washers are curved to provide a spring-like action for fasteners and assemblies. Commonly used as take-up springs for large tolerance variations, cushioning devices in light-load applications, for reducing end-play in electric motors, and for eliminating rattles in assemblies. Zinc plating, retards the corrosion rate in a normal atmosphere.(7)
- Sealing washers help seal joints, prevent leakage and cushion under the head of the bolt or nut. Rubber is bonded to a washer to form a washer that is strong, yet soft and resilient enough to use with fragile materials. Stainless Steel material.(6)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. PVC is resistant to many chemicals and has good strength characteristics. These washers can also offer electrical insulation properties. Rigid PVC is clear in the thinner grades, but changes to grey at .040 thick. Operating temperatures are from-20[DEG]F to 4(6)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Black oxide finish provides enough corrosion protection to prevent rusting.(6)
- Washers are self-sealing, vibration-resistant washers, each having a silicone rubber section, molded and bonded to a stainless steel formed washer. These washers are designed for use with regular screws, bolts, or studs for sealing panels and enclosures having standard as well as large clearance holes or adjustment slots, and can also be used to seal openings of protrusions. Upon tightening, a seal is formed under the head of the fastener as well as around the periphery of the washer face. Stai(5)
- These washers provide a finished appearance. Use with standard 82[DEG] flat-and oval-head countersunk screws. Brass is commonly used by electrical and communications industries, builders hardware and some marine applications.(5)
- These washers provide a finished appearance. Use with standard 82[DEG] flat-and oval-head countersunk screws.(5)
- Square beveled washers are specially designed for shimming and leveling in structural applications. Use with American standard beams and channels that have 1: 6 slope (the same taper as a standard I-beam). Hardened steel washers conform to ASTM F 436. They are suitable for use with A325/A490 structural bolts. Plain Malleable washers are for general applications. Plain Finish, or bare metal finish which may contain a light coating of oil.(5)
- Square beveled washers are specially designed for shimming and leveling in structural applications. Use with American standard beams and channels that have 1: 6 slope (the same taper as a standard I-beam). Hardened steel washers conform to ASTM F 436. They are suitable for use with A325/A490 structural bolts. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(5)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. Yellow Zinc offers a modest amount of corrosion resistance, slightly higher than that of clear zinc.(5)
- Flat washers are used typically under the head of a bolt or a nut to distribute the foces applied when tightening. USS and SAE washers are designed for cap screws and other threaded products. Chrome plating is used its appearance and corrosion resistance similar to zinc plating.(5)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. Black oxide finish provides enough corrosion protection to prevent rusting.(5)
- Also known as spring lock washers, these split lock washers provide a positive locking action. Spring like take-up compensates for loosening caused by slight material wear. 2024T4 Aluminum. Aluminum is suprisingly strong because it work hardens as it is formed into screws; provides high corrosion resistance.(5)
- Also known as Plaster washers these special sized washers have an extra-wide bearing size for screw heads to eliminate the need for patching holes. This also permits the using of smaller size screws than might otherwise be needed. Galvanized plating protects the bolt from corrosion; typically used in outdoor applications.(5)
Washer Type
- External Tooth(92)
- Internal Tooth(79)
- Dual Action Spring(27)
- Split Lock(15)
Durometer
Outer Diameter
- 1.250"(77)
- 2.000"(71)
- 1.500"(70)
- 1.000"(69)
- 1.750"(56)
- 2.500"(50)
- 0.500"(50)
- 0.625"(47)
- 0.750"(46)
- 2"(44)
- 0.875"(41)
- 2.250"(38)
- 0.375"(36)
- 3.000"(29)
- 2.750"(28)
- 0.250"(27)
- 1.062"(26)
- 0.688"(26)
- 1.375"(24)
- 1.312"(24)
- 0.350"(22)
- 0.680"(21)
- 1.210"(20)
- 0.562"(20)
- 0.812"(19)
- 0.487"(19)
- 1.910"(18)
- 24mm(17)
- 1.469"(17)
- 0.869"(17)
- 0.583"(17)
- 30mm(16)
- 1.265"(15)
- 0.734"(15)
- 0.312"(15)
- 37mm(14)
- 3.750"(14)
- 10mm(14)
- 0.650"(14)
- 0.437"(14)
- 3.500"(13)
- 3.250"(13)
- 1.540"(13)
- 1.073"(13)
- 0.530"(13)
- 0.438"(13)
- 0.300"(13)
- 9mm(12)
- 3"(12)
- 2.300"(12)
- 1.459"(12)
- 0.776"(12)
- 0.381"(12)
- 0.334"(12)
- 0.280"(12)
- 7mm(11)
- 18mm(11)
- 1.875"(11)
- 1.125"(11)
- 0.922"(11)
- 0.430"(11)
- 28mm(10)
- 1.650"(10)
- 1.156"(10)
- 1"(10)
- 0.965"(10)
- 0.377"(10)
- 0.293"(10)
- 34mm(9)
- 12mm(9)
- 1.625"(9)
- 1.360"(9)
- 4mm(8)
- 4.000"(8)
- 39mm(8)
- 3.375"(8)
- 16mm(8)
- 15mm(8)
- 1.850"(8)
- 1.656"(8)
- 1.468"(8)
- 0.830"(8)
- 0.770"(8)
- 0.478"(8)
- 0.209"(8)
- 9.20mm(7)
- 6mm(7)
- 56mm(7)
- 44mm(7)
- 21mm(7)
- 18.10mm(7)
- 14mm(7)
- 14.80mm(7)
- 11.80mm(7)
- 1.187"(7)
- 0.531"(7)
- 50mm(6)
- 4.500"(6)
- 33.60mm(6)
- 27.40mm(6)
- 24.10mm(6)
- 20mm(6)
- 2.419"(6)
- 17mm(6)
- 11mm(6)
- 1.847"(6)
- 0.910"(6)
- 0.730"(6)
- 0.687"(6)
- 0.610"(6)
- 0.594"(6)
- 0.494"(6)
- 0.395"(6)
- 0.305"(6)
- 0.295"(6)
- 8mm(5)
- 7.60mm(5)
- 66mm(5)
- 5.000"(5)
- 40mm(5)
- 35.90mm(5)
- 29.40mm(5)
- 2.170"(5)
- 2.036"(5)
- 12.5mm(5)
- 0.900"(5)
- 0.781"(5)
- 0.692"(5)
- 0.670"(5)
- 0.593"(5)
- 0.340"(5)
- 0.270"(5)
- 0.245"(5)
- 6.20mm(4)
- 5mm(4)
- 5.500"(4)
- 5.250"(4)
- 4.750"(4)
- 4.40mm(4)
- 4.250"(4)
- 26mm(4)
- 24.40mm(4)
- 20.50mm(4)
- 2.936"(4)
- 2.811"(4)
- 2.679"(4)
- 2.480"(4)
- 2.219"(4)
- 1.140"(4)
- 1.071"(4)
- 1.045"(4)
- 0.880"(4)
- 0.879"(4)
- 0.733"(4)
- 0.588"(4)
- 0.563"(4)
- 0.550"(4)
- 0.460"(4)
- 0.450"(4)
- 0.354"(4)
- 0.281"(4)
- 0.200"(4)
- 0.172"(4)
Product Weight
- 0.0001 lbs.(75)
- 0.0002 lbs.(53)
- 0.0005 lbs.(49)
- 0.0004 lbs.(38)
- 0.0003 lbs.(35)
- 0.0010 lbs.(27)
- 0.0007 lbs.(26)
- 0.0009 lbs.(22)
- 0.0008 lbs.(22)
- 0.04 lbs.(21)
- 0.03 lbs.(21)
- 0.0006 lbs.(19)
- 0.01 lbs.(17)
- 0.08 lbs.(16)
- 0.1 lbs.(15)
- 0.0019 lbs.(15)
- 0.0011 lbs.(15)
- 0.2 lbs.(14)
- 0.0013 lbs.(14)
- 0.02 lbs.(13)
- 0.0020 lbs.(13)
- 0.0012 lbs.(13)
- 0.22 lbs.(12)
- 0.0024 lbs.(12)
- 0.06 lbs.(11)
- 0.0027 lbs.(11)
- 0.0022 lbs.(11)
- 0.0018 lbs.(11)
- 0.0016 lbs.(11)
- 0.12 lbs.(10)
- 0.05 lbs.(10)
- 0.0090 lbs.(10)
- 0.0039 lbs.(10)
- 0.0032 lbs.(10)
- 0.0026 lbs.(10)
- 0.15 lbs.(9)
- 0.0042 lbs.(9)
- 0.0035 lbs.(9)
- 0.0030 lbs.(9)
- 0.35 lbs.(8)
- 0.28 lbs.(8)
- 0.09 lbs.(8)
- 0.013 lbs.(8)
- 0.0062 lbs.(8)
- 0.0028 lbs.(8)
- 0.0021 lbs.(8)
- 0.0015 lbs.(8)
- 0.4 lbs.(7)
- 0.398 lbs.(7)
- 0.21 lbs.(7)
- 0.138 lbs.(7)
- 0.11 lbs.(7)
- 0.023 lbs.(7)
- 0.0061 lbs.(7)
- 0.0025 lbs.(7)
- 0.75 lbs.(6)
- 0.36 lbs.(6)
- 0.34 lbs.(6)
- 0.3 lbs.(6)
- 0.24 lbs.(6)
- 0.111 lbs.(6)
- 0.07 lbs.(6)
- 0.0668 lbs.(6)
- 0.022 lbs.(6)
- 0.019 lbs.(6)
- 0.0177 lbs.(6)
- 0.0057 lbs.(6)
- 0.0055 lbs.(6)
- 0.0053 lbs.(6)
- 0.0051 lbs.(6)
- 0.0050 lbs.(6)
- 0.0049 lbs.(6)
- 0.0048 lbs.(6)
- 0.0034 lbs.(6)
- 0.0033 lbs.(6)
- 0.0031 lbs.(6)
- 0.0029 lbs.(6)
- 0.0014 lbs.(6)
- 1.3 lbs.(5)
- 1.0 lbs.(5)
- 0.52 lbs.(5)
- 0.39 lbs.(5)
- 0.335 lbs.(5)
- 0.266 lbs.(5)
- 0.23 lbs.(5)
- 0.171 lbs.(5)
- 0.17 lbs.(5)
- 0.16 lbs.(5)
- 0.14 lbs.(5)
- 0.033 lbs.(5)
- 0.0215 lbs.(5)
- 0.0085 lbs.(5)
- 0.0082 lbs.(5)
- 0.0072 lbs.(5)
- 0.0070 lbs.(5)
- 0.0065 lbs.(5)
- 0.0056 lbs.(5)
- 0.0047 lbs.(5)
- 0.0045 lbs.(5)
- 0.0040 lbs.(5)
- 0.0038 lbs.(5)
- 0.0023 lbs.(5)
- 0.0017 lbs.(5)
- 3.0 lbs.(4)
- 0.77 lbs.(4)
- 0.65 lbs.(4)
- 0.5 lbs.(4)
- 0.26 lbs.(4)
- 0.25 lbs.(4)
- 0.208 lbs.(4)
- 0.19 lbs.(4)
- 0.18 lbs.(4)
- 0.166 lbs.(4)
- 0.155 lbs.(4)
- 0.13 lbs.(4)
- 0.068 lbs.(4)
- 0.0385 lbs.(4)
- 0.0379 lbs.(4)
- 0.0365 lbs.(4)
- 0.035 lbs.(4)
- 0.0324 lbs.(4)
- 0.031 lbs.(4)
- 0.026 lbs.(4)
- 0.025 lbs.(4)
- 0.0195 lbs.(4)
- 0.0175 lbs.(4)
- 0.016 lbs.(4)
- 0.0135 lbs.(4)
- 0.0134 lbs.(4)
- 0.0132 lbs.(4)
- 0.012 lbs.(4)
- 0.011 lbs.(4)
- 0.0096 lbs.(4)
- 0.0091 lbs.(4)
- 0.0075 lbs.(4)
- 0.0073 lbs.(4)
- 0.0071 lbs.(4)
- 0.0064 lbs.(4)
- 0.0063 lbs.(4)
- 0.0060 lbs.(4)
- 0.0043 lbs.(4)
Thread Size
Head Dia.
Includes
Fits
Inner Diameter
- 0.406"(59)
- 0.531"(53)
- 0.281"(50)
- 0.812"(43)
- 0.260"(39)
- 0.562"(32)
- 0.500"(32)
- 0.385"(30)
- 0.150"(30)
- 0.512"(28)
- 0.343"(28)
- 1.062"(27)
- 0.687"(27)
- 0.219"(27)
- 17mm(26)
- 1.250"(26)
- 0.344"(26)
- 0.322"(26)
- 1.375"(25)
- 0.200"(25)
- 1.625"(23)
- 0.641"(22)
- 0.450"(22)
- 0.174"(22)
- 0.938"(21)
- 0.766"(21)
- 0.250"(21)
- 0.688"(20)
- 0.375"(20)
- 0.312"(20)
- 0.937"(18)
- 0.894"(18)
- 0.120"(18)
- 13mm(17)
- 1.500"(17)
- 0.656"(17)
- 0.340"(17)
- 8.4mm(16)
- 6.4mm(16)
- 2.125"(16)
- 0.530"(16)
- 10.5mm(15)
- 0.790"(15)
- 0.625"(15)
- 0.600"(15)
- 0.267"(15)
- 0.210"(15)
- 19mm(14)
- 1.240"(14)
- 0.438"(14)
- 0.204"(14)
- 5.3mm(13)
- 1.875"(13)
- 1.024"(13)
- 0.920"(13)
- 0.170"(13)
- 4.3mm(12)
- 21mm(12)
- 15mm(12)
- 0.574"(12)
- 0.156"(12)
- 0.148"(12)
- 1.534"(11)
- 0.469"(11)
- 0.227"(11)
- 0.176"(11)
- 6.50mm(10)
- 5.40mm(10)
- 21.20mm(10)
- 1.000"(10)
- 0.815"(10)
- 0.663"(10)
- 0.594"(10)
- 0.398"(10)
- 0.123"(10)
- 8.50mm(9)
- 12.70MM(9)
- 10.70mm(9)
- 1.280"(9)
- 1.153"(9)
- 1.060"(9)
- 0.840"(9)
- 0.670"(9)
- 0.332"(9)
- 0.285"(9)
- 4.40mm(8)
- 25mm(8)
- 14.70mm(8)
- 1.408"(8)
- 1.125"(8)
- 1.100"(8)
- 0.770"(8)
- 0.510"(8)
- 0.420"(8)
- 0.410"(8)
- 0.280"(8)
- 0.188"(8)
- 0.125"(8)
- 7.4mm(7)
- 31mm(7)
- 3.40mm(7)
- 3.2mm(7)
- 23mm(7)
- 1.120"(7)
- 1.052"(7)
- 0.921"(7)
- 0.690"(7)
- 0.560"(7)
- 0.203"(7)
- 0.172"(7)
- 25.50mm(6)
- 1.590"(6)
- 1.577"(6)
- 1.350"(6)
- 1.315"(6)
- 0.810"(6)
- 0.750"(6)
- 0.392"(6)
- 0.380"(6)
- 0.258"(6)
- 0.147"(6)
- 0.130"(6)
- 8.62mm(5)
- 5.48mm(5)
- 37mm(5)
- 31.70mm(5)
- 3.38mm(5)
- 23.50mm(5)
- 2.625"(5)
- 2.20mm(5)
- 2.039"(5)
- 1.789"(5)
- 1.750"(5)
- 1.470"(5)
- 1.312"(5)
- 1.183"(5)
- 0.940"(5)
- 0.795"(5)
- 0.658"(5)
- 0.527"(5)
- 0.464"(5)
- 0.391"(5)
- 0.317"(5)
- 0.266"(5)
- 0.231"(5)
- 0.133"(5)
- 0.094"(5)
- 0.090"(5)
Inside Dia.
- 9/32"(58)
- 11/32"(50)
- 13/32"(47)
- 17/32"(42)
- 0.260"(36)
- 13/16"(35)
- 13/64"(34)
- 1-1/16"(32)
- 6.4mm(29)
- 15/16"(29)
- 11/16"(28)
- 0.200"(27)
- 3/16"(25)
- 9/16"(23)
- 5.3mm(23)
- 10.5mm(23)
- 8.4mm(22)
- 4.3mm(22)
- 7/32"(21)
- 5/32"(21)
- 1/8"(21)
- 0.195"(21)
- 7/16"(20)
- 21/32"(20)
- 17mm(20)
- 13mm(20)
- 0.150"(20)
- 0.120"(20)
- 3.2mm(19)
- 15/32"(19)
- 0.385"(19)
- 5/16"(16)
- 21mm(15)
- 0.322"(15)
- 0.320"(15)
- 25/32"(14)
- 15mm(14)
- 1/2"(14)
- 0.512"(14)
- 0.203"(14)
- 0.115"(14)
- 25mm(13)
- 0.625"(13)
- 0.500"(13)
- 0.174"(13)
- 0.173"(13)
- 3/8"(12)
- 29/32"(12)
- 0.355"(12)
- 1-3/8"(11)
- 0.750"(11)
- 0.267"(11)
- 0.265"(11)
- 0.250"(11)
- 0.141"(11)
- 5/8"(10)
- 2.7mm(10)
- 1/4"(10)
- 1-5/8"(10)
- 1-1/32"(10)
- 0.641"(10)
- 0.564"(10)
- 0.530"(10)
- 0.490"(10)
- 0.398"(10)
- 0.290"(10)
- 0.230"(10)
- 0.170"(10)
- 0.156"(10)
- 0.148"(10)
- 31mm(9)
- 2.2mm(9)
- 17/64"(9)
- 1.129"(9)
- 0.766"(9)
- 0.375"(9)
- 0.328"(9)
- 0.252"(9)
- 0.204"(9)
- 0.176"(9)
- 0.140"(9)
- 0.125"(9)
- 6.1mm(8)
- 10.2mm(8)
- 1-1/2"(8)
- 0.990"(8)
- 0.753"(8)
- 0.740"(8)
- 0.615"(8)
- 0.390"(8)
- 0.332"(8)
- 0.314"(8)
- 0.312"(8)
- 0.143"(8)
- 0.123"(8)
- 0.114"(8)
- 0.094"(8)
- 0.090"(8)
- 8.1mm(7)
- 37mm(7)
- 19mm(7)
- 19/32"(7)
- 12.2mm(7)
- 11/64"(7)
- 1.504"(7)
- 1.254"(7)
- 1.024"(7)
- 1.000"(7)
- 1"(7)
- 0.878"(7)
- 0.812"(7)
- 0.628"(7)
- 0.440"(7)
- 0.220"(7)
- 0.193"(7)
- 0.167"(7)
- 0.142"(7)
- 5.1mm(6)
- 4.1mm(6)
- 3.1mm(6)
- 2-1/8"(6)
- 16.2mm(6)
- 1.534"(6)
- 1.280"(6)
- 1.003"(6)
- 1-1/4"(6)
- 0.894"(6)
- 0.640"(6)
- 0.515"(6)
- 0.502"(6)
- 0.450"(6)
- 0.377"(6)
- 0.171"(6)
- 0.127"(6)
- 0.088"(6)
- 9/32(5)
- 5/64"(5)
- 3/32"(5)
- 21/32(5)
- 17/32(5)
- 13/32(5)
- 1.379"(5)
- 1-9/32"(5)
- 1-9/16"(5)
- 1-7/8"(5)
- 1-5/32"(5)
- 1-3/16"(5)
- 0.574"(5)
- 0.384"(5)
- 0.281"(5)
- 0.256"(5)
- 0.201"(5)
- 0.196"(5)
- 0.168"(5)
- 0.101"(5)
- 0.093"(5)
Head Height
Piston Material
- Solid Ceramic(45)
- SST(4)
Length
Pump Type
- Crankshaft(44)
- Axial(8)
Shoulder Thickness
Material of Construction
- Steel(40)
- Nylon(11)
- Rubber(6)
- Hot Rolled Carbon Steel(6)
- Polyethylene(5)
Washer Thickness
Size
Hose Dimensions
- 3/8" x 50 Ft.(36)
- 3/8" x 25 Ft.(10)
Brinell Hardness
- 200(35)
Washer O.D.
Vickers Hardness
- 140(31)
Manufacturer Series
- None(30)
Additional Information
- None(30)
Usable Hours per Week
Package Weight
Number of Waves
Rotation Opposite Gear End
- CCW(23)
Motor Type
- Small Engine(23)
Voltage
Connection
- Slip(18)
Pump Drive
Dimensions (in)
- 1-5/8 x 1-5/8(17)
Starter
Number of Mounting Holes
Volts/Phase
Fitting Type
Burner Fuel
- Diesel or Kerosene(14)
- Oil(6)
Screw Size Required
- None(13)
Height
Anchor Type
Shoulder Dia.
Seal Material
- Neoprene Rubber(12)
- Silicone Rubber(10)
Shape
- Round(10)
Operating Pressure
Engine
- Honda OHV(10)
Conduit Hole
Width
Width (In.)
- 1-5/8(9)
Plug Type
Color/Finish
Water Output Temp.
- 190 to 200DF(8)
- 250 to 300DF(6)
- 190DF(4)
Tank Length (In.)
Slot Width
Rivet Size
HP
Bolt Size
Steel Thickness (In.)
- 1/4(7)
Resists
- Corrosion(7)
GPM
Filtration
- Yes(7)
Depth (In.)
- 1-5/8(7)
Bolt Size (in)
Water Input Temp.
- 50 to 90DF(6)
- 140DF(6)
- 125DF(5)
Refills
- 2FUD5(6)
Pipe Dia. (In.)
Number of Teeth
Engine Size
- 389 Cu-cm(6)
Thread Type
- UNC(5)
Thread Direction
- Right Hand(5)
Tank Width (In.)
- 20(5)
Tank Capacity
- 5 gal.(5)
Seal Type
- O-Ring(5)
Overall Height
Load Capacity (Lb.)
- 500(5)
Installation
- Drill, 3/8(5)
Height (In.)
Construction
Bolt Center (In.)
- 2-11/16(5)
Amps AC
Temp. Range (F)
Standards
Retaining Dia.
- 1/8"(4)
Pump Size
- 3/8 Port(4)
Overall Length (In.)
- 36(4)
OD (in)
8.
$145.27
+ $13.55 Shipping
Out of Stock
9.
15.
17.
18.
20.
23.
28.
29.
31.
34.
39.
40.
43.
50.
53.
54.
55.
56.
57.
58.