TIG Welding Accessories

UNSPSC

• 23171519(185)
• 40141731(76)
• 26121629(35)
• 27112808(29)
• 40142007(19)
• 40142008(17)
• 23171524(16)
• 23171511(3)
• 23171517(2)
• 41103502(1)

Item

• Nozzle(75)
• Pre-Formed Purge Dam(27)
• Power Cable(27)
• Inflatable Purge Bladder(26)
• Socket Weld Spacer Ring(16)
• Collet(16)
• Water Hose(12)
• Gas Hose(12)
• Collet Body(12)
• Gas Lens(11)
• TIG Accesory Kit(10)
• Water Soluble Paper(9)
• Quick Connector(9)
• Gas Hose Extension(7)
• Water Hose Extension(5)
• Gas Lens Large(5)
• Welding Alignment Stick(4)
• Power Cable Adapter(4)
• Handle(4)
• Gas Lens Large Stubby(4)
• Cable Cover(4)
• TIG Torch(3)
• Power Cable Extension(3)
• Back Cap, Short(3)
• Back Cap, Medium(3)
• Back Cap, Long(3)
• Aluminum Tape(3)
• Wireless Remote Kit(2)
• Water Soluble Tape(2)
• Valve Knob & Stem(2)
• Tig Starter Kit(2)
• O-Ring(2)
• Light Industrial Cooler(2)
• Insulator Nozzle(2)
• Handle Ribbed(2)
• Handle Knurled(2)
• Gas Lens Insulator, LG(2)
• Gas Cyclinder Undercarriage(2)
• Fiberglass Backing Tape(2)
• Contractor Kit(2)
• Back Cap Insulator(2)
• Wireless TIG Receiver Kit(1)
• Wireless TIG Foot Control(1)
• Wireless Remote Glide Pad(1)
• Wireless Remote Belt Clip(1)
• Wireless Remote Battery Box(1)
• Wireless Remote Adapter Kit(1)
• Wireless Remote Adapter Cord(1)
• Wireless Hand Control(1)
• Wire Clamp(1)
• Welding Cart(1)
• Water Coupler(1)
• Water Cooled Welding Cart(1)
• Tungsten Grinder(1)
• TIG Welding Kit(1)
• TIG Torch Water Cooled Kit(1)
• TIG Solenoid Kit(1)
• TIG Module(1)
• TIG Control Panel(1)
• Stubby Nozzle Insulator(1)
• Running Gear With Dual Cylinder Rack(1)
• Running Gear Kit(1)
• Quick Release Water Coupler(1)
• Quick Release Gas Coupler(1)
• Protective Cover(1)
• Power Cable Coupler(1)
• Insulator Sleeve(1)
• Hook up Kit(1)
• Handle Textured D Shape(1)
• Gas Lens Insulator(1)
• Gas Coupler(1)
• Foot Pedal(1)
• Finger Tip Control(1)
• Double-Decker Kit(1)
• Diamond grinding wheel, standard(1)
• Diamond grinding wheel, rough(1)
• Adapter, Machine, 50mm(1)

Application

• MIG/TIG Welding, Purging(66)
• 25 Ft (7.6m)(26)
• 12.5 Ft (3.8m)(21)
• Socket Welding(16)
• 0.040" (1.0mm)(6)
• 0.020" (0.5mm)(6)
• 1/16"(5)
• #8 (1/2")(5)
• #7 (7/16")(5)
• #6 (3/8")(5)
• #5 (5/16")(5)
• #4 (1/4")(5)
• For TIG Welding(4)
• Flange and Pipe Fit-Up, Welding Alignment(4)
• 3/32" (2.4mm)(4)
• 3/32"(4)
• 1/8" (3.2mm)(4)
• 1/8"(4)
• 1/16" (1.6mm)(4)
• #10 (5/8")(4)
• 25 Ft Long(3)
• 12 1/2 Ft Long(3)
• Water Cooled Welding(2)
• TIG Welding AC and DC(2)
• Ribbed Thread(2)
• Long, #7L (7/16")(2)
• Long, #6 (3/8")(2)
• Long, #4 (1/4")(2)
• Knurled Thread(2)
• Back Purging, Ship & Submarine Manufacturing, Aircraft, Pressure Vessels, Boilers, Storage Tanks(2)
• 2pc, 25 Ft (7.6m)(2)
• 2pc, 12.5 Ft (3.8m)(2)
• 0.020-0.040"(2)
• #12 (3/4")(2)
• X-Long, #6 (3/8")(1)
• X-Long, #5 (5/16")(1)
• X-Long, #4 (1/4")(1)
• X-Long, #3 (3/16")(1)
• Welded Steel Tubing Frame(1)
• WP-9, 17, 50(1)
• The Invertec Tig Solenoid Kit Controls Gas Flow Into The Invertec V350 Pro Through The Twist Mate Connector (Not Compatible With Construction Model)(1)
• Supplies High Frequency For Superior Starting, Contactor Control, Remote Control Capability And A Gas Valve For AC Or DC Tig Welding (Polarity Selection Dependent On Output Characteristics Of Power Source)(1)
• Stubby, 0.040-1/8" (1.0-3.2mm)(1)
• Move Welder And Gas Cylinders Easily And Safely With The Sturdy K841 Undercarriage(1)
• Move Welder And Gas Cylinder Easily And Safely With The Sturdy K964-1 Undercarriage(1)
• MIG/TIG Welding, Purging, HVAC, Electrical, Maintenance(1)
• Long, #6L (3/8")(1)
• Long, #5L (5/16")(1)
• Long, #5 (5/16")(1)
• Long, #3 (3/16")(1)
• LG, XX-Long, #12 (3/4")(1)
• LG, XX-Long, #10 (5/8")(1)
• LG, X-Long, #12 (3/4")(1)
• LG, X-Long, #10 (5/8")(1)
• LG, Short, #15 (15/16")(1)
• LG, Long, #8 (1/2")(1)
• LG, Long, #12 (3/4")(1)
• LG, Long, #10 (5/8")(1)
• LG, #12 (3/4")(1)
• LG, #10 (5/8")(1)
• Gas Lens, 3/32" (2.4mm)(1)
• Gas Lens, 1/8" (3.2mm)(1)
• Gas Lens, 1/16" (1.6mm)(1)
• Gas Lens, 0.040" (1.0mm)(1)
• Gas Lens, 0.020" (0.5mm)(1)
• GL, Short, #11 (11/16")(1)
• GL, Long, #8 (1/2")(1)
• GL, Long, #7 (7/16")(1)
• GL, Long, #6 (3/8")(1)
• GL, Long, #5 (5/16")(1)
• GL, LG, XX-Long, #8 (1/2")(1)
• GL, LG, XX-Long, #6 (3/8")(1)
• GL, LG, X-Long, #8 (1/2")(1)
• GL, LG, X-Long, #6 (3/8")(1)
• GL, LG, Long, #6 (3/8")(1)
• GL, LG, #8 (1/2")(1)
• GL, LG, #6 (3/8")(1)
• GL, #8 (1/2")(1)
• GL, #7 (7/16")(1)
• GL, #6 (3/8")(1)
• GL, #5 (5/16")(1)
• GL, #4 (1/4")(1)
• For TIG and Stick Welding(1)
• Electrode Range .020"-1/8" TIG / GTAW(1)
• Control Panel Provides 2/4-Step Trigger With Adjustable Pulser Controls And Downslope Timer For Tig Welding(1)
• Cart Has Convenient Handles Which Allow For Easy Cable Storage, While Full Length Side Trays Store Parts And Tools(1)
• 8" (203mm)(1)
• 7/8"-14 LH(1)
• 6 Ft (1.8m)(1)
• 50 Ft (15.2m)(1)
• 5/8"-18 RH(1)
• 5/8"-18 LH(1)
• 5/32", (4.0mm)(1)
• 5/32" (4.0mm)(1)
• 4" Cover for 22 Ft Long(1)
• 4" Cover for 12.5 Ft Long(1)
• 4 Ft (1.2m)(1)
• 3" Cover for 22 Ft Long(1)
• 3" Cover for 12.5 Ft Long(1)
• 3 Ft (0.9m)(1)
• , 50 Ft (15.2m)(1)
• , 5/32" (4.0mm)(1)
• #6L (3/8")(1)
• #5L (5/16")(1)
• #4L (1/4")(1)

For Use With

• EZ Zone Tape(52)
• 17, 17V, 18, 18P, 18V, 26, 26P, 26V(35)
• 9, 9V, 20, 20V, 22, 23, 25(25)
• 17, 17V, 18, 18SP, 18V, 26, 26V(24)
• 9, 9V, 17, 17V, 18, 18P, 20, 22, 23, 26, 26V(17)
• 9, 17, 23, 50, 150(10)
• Aquasol Water Soluble Tape, EZ Zone Tape(9)
• 9, 9P, 9V, 20, 20P, 22, 25(8)
• 9, 9P, 9V, 20, 20P, 22, 23, 25(8)
• 18, 18P, 18SC, 20, 24, 25(8)
• ALL(7)
• 20, 20P, 22, 24W, 25, WP-125, WP-225(7)
• CS125, CS310(5)
• 9, 20, WP-24, 24V, 24, 24F, 24FV, 24W(5)
• 26, 26F, 26FV, 26V, 200, 200V(5)
• 18, 18SC, 18SP, 18V(5)
• Use with Lincoln Electric TIG Welders(4)
• Mfr. No. TTG Plus(4)
• CS310(4)
• 9, 17(4)
• 20, 20P, 24W, 25, WP-125, WP-225(4)
• 18, 18SC, 18P, 18SP, 18V(4)
• 18, 18P, 18SC, 18SP, 18V(4)
• WP-9, WP-20(3)
• WP-17, WP-18, WP-26(3)
• Mfr. No. 300429(3)
• 9, 20(3)
• 26(3)
• 20, 20P, 22, 25, WP-225(3)
• Water Soluble Paper(2)
• QCS(2)
• Mfr. No. 300430(2)
• Mfr. No. 300429, 300430(2)
• CS310, CS410(2)
• All PipeWorx Welding Systems Solid State Power Sources After Serial No JK674521(2)
• 9, 9P, 9V, 20, 20P, 25(2)
• 9, 9P, 9V, 17, 17V, 24, 24W(2)
• 9, 9F, 9V, 17, 17F, 17V, 24F, 150, 150V(2)
• 20, 25, WP-125, WP-225(2)
• 20, 20V, 22, 23, 25(2)
• 18, 18V, 18SC, 18SP, 26, 26V(2)
• 17, 17V, 18, 18V, 26, 26V(2)
• 17, 17V, 18, 18SC, 18V, 26, 26V(2)
• WP-9, WP-9P, WP-20, WP-20P, WP-25(1)
• WP-225(1)
• WP-18SC(1)
• WP-17, WP-17V, WP-18, WP-18V, WP-26, WP-26V(1)
• Square Wave TIG 175(1)
• Side Water Hose(1)
• Side Gas Hose(1)
• STT-II, Invertec V350 PRO, Power Wave 355M(1)
• R3R-400, R3R-500, CV-400, DC-400(1)
• Precision TIG 275(1)
• PipeWorx Welding System(1)
• PipePro 304(1)
• Mfr. No. 903701 and 907099(1)
• Maxstar 200SD(1)
• Maxstar 200, Dynasty 200, Syncrowave 201(1)
• Maxstar 200, Dynasty 200, Syncrowave 200(1)
• Invertec V350-PRO(1)
• Idealarc 250, R3R-400, R3R-500, Invertec V350-PRO, Idealarc DC-400, DC-600, DC-655, Ranger 250 GXT(1)
• Big Blue Air Pak, Big Blue Turbo, Big Blue, Big 40 CC/CV, Big Blue 300 Pro, Big Blue 350 PipePro, Big Blue 400 Eco Pro, CST 280, Deltaweld Series, Dimension Series, Diversion 180, Dynasty 200/350/700, Gold Star Series, Invision MPa/MP/P, Mark VI, Maxstar 150 STL/STH, Maxstar 200 SD/DX/LX, Maxstar 350/700, Miller Du-Op, PipePro 304, PipeWorx, PRO 300, Shopmate 300, Sub Arc DC 650/1000, Summit Arc 1000/1250, Syncrowave 200, Syncrowave 250 DX/350 LX, XMT 304/350(1)
• Big Blue Air Pak, Big Blue Turbo, Big Blue, Big 40 CC/CV, Big Blue 300 Pro, Big Blue 350 PipePro, Big Blue 400 Eco Pro, CST 280, Deltaweld Series, Dimension Series, Diversion 180, Dynasty 200/350/700, Gold Star Series, Invision MPa/MP/P, Mark VI, Maxstar 150 STL/STH, Maxstar 200 SD/DX/LX, Maxstar 350/700, Miller Du-Op, PipePro 304, PRO 300, Shopmate 300, Sub Arc DC 650/1000, Summit Arc 1000/1250, Syncrowave 200, Syncrowave 250 DX/350 LX, Trailblazer 275/302 Series, XMT 304/350(1)
• ADAPTER INERT A-RHF-B-RHM(1)
• AC and DC Welders, Thunderbolt XL AC,(1)
• 9V, 150VTB, 17V(1)
• 9, 9V, 9-70, 20(1)
• 9, 9V, 17, 17V(1)
• 5UW50 and 4PU33 TIG Welders(1)
• 23, 26(1)
• 200VTB, 26V, 300V(1)
• 20, 20P, 22, 25, SF-225(1)
• 20, 20P, 22, 25(1)
• 20, 20P, 22, 24W, 25, MT-125, WP-225(1)
• 20, 20P, 18, 18P, 18SC, 18SP, 25(1)
• 18SC, 18, 18P, 20, 25(1)
• 18, 20, 22, 24W, 25, WP-125, WP-225(1)
• 18, 18SC, 18SP, 18V, 26, 26V(1)
• 18, 18P, 18V, 20, 20P, 24W, 25, WP-225(1)
• 18, 18P, 18SP, 18V, 26, 26V(1)

Material

• Alumina(50)
• Water Soluble Paper And Adhesive Coated Water Soluble Paper(47)
• Copper(28)
• Polyurethane-Coated Nylon(26)
• Rubber(25)
• Lava(25)
• Copper / Brass(20)
• Vinyl(19)
• Braided Rubber(15)
• Ceriated(6)
• Woven Nylon(4)
• HD Vinyl(4)
• Brass(4)
• Steel(3)
• Coated Aluminum Foil(3)
• adhesive coated water soluble paper(2)
• Thoriated(2)
• Red Braided Rubber(2)
• Fiberglass, Adhesive Coated Aluminum Tape(2)
• FX(2)
• Black Braided Rubber(2)
• 350A(2)
• 150A(2)
• 150 A 1 Pc Cable(2)
• Stainless Steel(1)
• Ribbed Thread(1)
• Plastic(1)
• Knurled Thread(1)
• Brass / Silicone(1)
• ASW-60/S-22(1)
• ASW-60/R-31(1)
• ASW-60/R-15(1)
• ASW-40C/R-20(1)
• ASW-35/S-22(1)
• ASW-35/S-14(1)
• ASW-35/S-11(1)
• ASW-35/R-9(1)
• ASW-35/R-15(1)
• 7/8"-14 LH(1)
• 5/8"-18 RH(1)
• 5/8"-18 LH(1)
• 400A(1)
• 200A 1 Pc Cable(1)
• 200A(1)

Characteristics

• Alumina(50)
• Copper(28)
• The Patented Ez Purge(R) Is A Preformed, Self-Adhesive Water Soluble Purge Dam That Enables Welders To Save Time On Weld Preparation, Save Gas And Improve Project Timeliness. Eliminate Measuring, Cutting And Constructing. Simply Peel, Insert And Press The D(27)
• Rubber(26)
• Lava(25)
• I-Purge is the reusable, economical and long term solution for pipe purging. I-Purge Inflatable Purge Bladder System is comprised of two inflatable lightweight polyurethane-coated nylon covered dams, connected by a braided tube. Ideal for purging multiple pipes of the same diameter and fabrication applications. Available in custom sizes upon request. Suitable for standard welding applications up to 392?F or 200?C. Adjust the flow meter to approximately 10-15 CFH (5-8 LPM) initally and upwards to 30 CFH (15 LPM) during operation.(25)
• Copper / Brass(20)
• Vinyl(19)
• Compatible With Any Metal - Eliminate The Need To Pre-measure Or Guess The Size Of A Gap Opening Before Welding, Solugap(TM) Provides The 1/16" Minimum Gap Required By Ansi 31.1, Section III, ASME, Us Navy & Military Codes. Unique 3-Point Tabs Around The Ed(16)
• Braided Rubber(14)
• Made Of Sodium Carboxyl Methyl, Can Be Used To Dam Argon Or Helium Gases During Tungsten Inert Gas (Tig) Welding Of Steel Or Aluminum Pipes. After Welding Is Complete, Flush Out Of System With Water Leaving No Residue In The Pipeline. Environmentally Friendly And Nontoxic. Can Be Formed Into Any Size Purge Dam. Position Minimum Of 6-8 Inches From Root Gap.(6)
• Ceriated(6)
• Woven Nylon(4)
• HD Vinyl(4)
• Brass(4)
• Made Of Sodium Carboxyl Methyl, Can Be Used To Dam Argon Or Helium Gases During Tungsten Inert Gas (Tig) Welding Of Steel Or Aluminum Pipes. After Welding Is Complete, Flush Out Of System With Water Leaving No Residue In The Pipeline. Environmentally Friendly And Nontoxic. Can Be Formed Into Any Size Purge Dam. Position Minimum Of 6-8 Inches From Root Gap. Use Heavy Weight Paper (Asw60) For Prpes Having An Inside Diameter Of 4 Inches Or Greater.(3)
• Ez Zone(R) Tape Is A Purge Gas Retaining Tape Used To Seal The Root Gap Between Pipes To Trap Argon Gas. Composed Of Two Adhesive Sections Separated By A One Inch Adhesive Free Center Zone. 3 Mil Aluminum Foil Coated, High Shear, High Heat Resistant, Acryli(3)
• Eliminate The Guess Work In Pipe Welding Fit Up.The Most Advanced Method For Maintaining Consistent And Precise Gaps On Pipes, Plates And Flanges As Required By AWS Codes D1.1 Thru D1.6, And API 1101 Pipe Codes. Made From EPA Approved Aquasol(R) Water Solub(3)
• Thoriated(2)
• Ribbed Thread(2)
• Red Braided Rubber(2)
• Knurled Thread(2)
• It Turns The Output On And Off And Allows The Operator To Precisely Control The Welding Amperage And Make Adjustments While Welding.(2)
• FX(2)
• Black Braided Rubber(2)
• A Pressure Sensitive Water Soluble Tape Made Of Sodium Carboxyl Methyl Recommended To Hold Purge Dams In Position, And When Needed To Splice Two Or More Pieces Of Aquasol(R) Paper Together.(2)
• 350A(2)
• 150A(2)
• 150 A 1 Pc Cable(2)
• The Undercarriage Accommodates 6" To 9" (152 To 229 Mm) Diameter Gas Cylinders, From 24" To 56" (610 To 1422 mm) High; Also Features A Pivoting Gas Platform To Easily Load The Bottle Without Lifting(1)
• The Tig Module Is A Portable, High Frequency Unit With Gas Valve For Tig Welding. Rated At 300 Amps/60% Duty Cycle, Requires 115V, Single Phase Input Power(1)
• The Invertec TIG Solenoid Kit Mounts Inside The Back Of The Invertec V350 PRO(1)
• Standard Finish(1)
• Stainless Steel(1)
• Rough Finish(1)
• Rear-Wheeled Cart Is Shipped Fully Assembled, Fits Through 30" Door(1)
• Platform Undercarriage Will Mount Two Gas Cylinders At Rear Of Welder(1)
• Plastic(1)
• I-Purge Is The Reusable, Economical And Long Term Solution For Pipe Purging. I-Purge Inflatable Purge Bladder System Is Comprised Of Two Inflatable Lightweight Polyurethane-coated Nylon Covered Dams, Connected By A Braided Tube. Ideal For Purging Multiple Pipes Of The Same Diameter And Fabrication Applications. Available In Custom Sizes Upon Request. Suitable For Standard Welding Applications Up To 392?f Or 200?c. Adjust The Flow Meter To Approximately 10-15 Cfh (5-8 LPM) Initally And Upwards To 30 CFH (15 LPM) During Operation.(1)
• Fiberglass Backing Tape, 4" Wide, Heat Resistant Aluminum Tape With Woven Fiberglass Center Strip 1 ?" Wide, Designed To Eliminate Or Reduce The Need For Back Purging And Post Weld Grinding. Heat Resistance 500?f (260?c) For Adhesive, 1100?f (593?c) For Aluminum Tape, 1022?f (550?c) For Fiberglass. For Applications Up to 300 Amp.(1)
• Fiberglass Backing Tape, 2 ?" Wide, Heat Resistant Aluminum Tape With Woven Fiberglass Center Strip 1 ?" Wide, Designed To Eliminate Or Reduce The Need For Back Purging And Post Weld Grinding. Heat Resistance 500?f (260?c) For Adhesive, 1100?f (593?c) For Aluminum Tape, 1022?f (550?c) For Fiberglass. For Applications Up to 300 Amp.(1)
• Eliminate The Guess Work In Pipe Welding Fit-Up.The Most Advanced Method For Maintaining Consistent And Precise Gaps On Pipes, Plates And Flanges As Required By AWS Codes D1.1 Thru D1.6, And API 1101 Pipe Codes. Made From EPA Approved Aquasol(R) Water Solub(1)
• Brass / Silicone(1)
• Advanced Control Panel Also Includes Adjustable Hot Start And Arc Force Internal Panel Controls For Stick Welding, And Other User Selectable Features(1)
• 7/8"-14 LH(1)
• 5/8"-18 RH(1)
• 5/8"-18 LH(1)
• 400A(1)
• 200A 1 Pc Cable(1)
• 200A(1)
• 1Gallon Water Cooler Designed for 200 Amp, Portable Welders(1)
• 120V(1)
• 1 Gallon Water Cooler Designed for 200 Amp, Portable Welders(1)

Length

• 25 Ft (7.6m)(26)
• 12.5 Ft (3.8m)(23)
• 75 ft.(3)
• 25 Ft Long(3)
• 12 1/2 Ft Long(3)
• 50 Ft (15.2m)(2)
• 2pc, 25 Ft (7.6m)(2)
• 2pc, 12.5 Ft (3.8m)(2)
• N/A(1)
• 9" Wide x 165 ft.(1)
• 8" (203mm)(1)
• 8 1/2" Wide x 14"(1)
• 8 1/2" Wide x 11"(1)
• 6 Ft (1.8m)(1)
• 50(1)
• 48(1)
• 4 x 41 Ft.(1)
• 4 Ft (1.2m)(1)
• 4(1)
• 31" Wide 165 Ft.(1)
• 3/32 x 4"(1)
• 3 Ft (0.9m)(1)
• 20 1/2" Wide x 165 Ft.(1)
• 2 x 300 Ft.(1)
• 2 1/ x 41 Ft.(1)
• 17" Wide x 22"(1)
• 17(1)
• 15 1/2" Wide x 22"(1)
• 15 1/2" Wide x 165 Ft.(1)
• 15 1/2" Wide 165 Ft.(1)
• 12(1)
• 1/8 x 4"(1)
• 1/32 x 4"(1)
• 1/16 x 4"(1)
• 1 x 300 Ft.(1)

Includes

• Water Soluble Tape(26)
• 14-Pin Receiver(3)
• Fin-and-Tube Heat Exchanger, Back-Lit Power Switch, External Filter, Polyethylene Tank and Coolant Level Sight Gauge(2)
• Carrying Case(2)
• Two Solid Rubber Tire Wheels and a Handle (Mount to Frame)(1)
• Torch Body, Handle, 12 ft Rubber Hose, Cable Cover, Collet, Collet Body, Back Cap, Nozzle and Tungsten(1)
• Standard Diamond Coated Grinding Wheel, Electrode Holder With Clamping Collets, Torx T20 Screwdriver And Mounting Plate To Convert To Bench Model(1)
• Single Gas Cylinder Platform, Bracket, Chain(1)
• RFCS-14 HD Foot Control with Protective Carrying Case, 150 Amp TIG Torch, International Style Torch Adapter, 200 Amp Stick Electrode Holder With 15 Ft Cable, 200 Amp Work Clamp With 15 Ft Cable, Regulator/Flowmeter With 12 Ft Gas Hose, Gas Hose Coupler and AK-2 Torch Accessory Kit(1)
• Quick-Change Water Coupler(1)
• Quick-Change Gas Coupler(1)
• K930-2 TIG Module(1)
• K841 Undercarriage(1)
• K2621-1 Advanced Control Panel(1)
• Gas Hose, Solenoid(1)
• Front Casters, No-Lift Gas Bottle Platform(1)
• Dual Gas Cylinder Rack And Front Handles For Pipeworx Power Source.(1)
• Cooler In A Drawer With Hoses And a Lockable Storage Drawer On A Dual Bottle Undercarriage(1)
• Ceriated Tungsten Electrodes (1/16, 3/32" 1/8"), 53N20 Wrench, Collet and Collet Body (1/16", 3/32", 1/8"), Lava Nozzles (#5, #6), Alumina Nozzles (#5, #6, #7, #8), Back Caps (Short, Medium, Long), (1) 24 (60 Degrees 160 Amp Torch Head), (1) 24-90 (90 Degrees 160 Amp Torch Head), (1) 9-90 (90 Degrees 200 Amp Torch Head), (1) 9P (180 Degrees 200 Amp Torch Head), (1) 1726P (180 Degrees 225 Amp Torch Head)"(1)
• 26.5 Feet Cord And Plug(1)
• 25ft-150Amp Tig Torch, Regulator, Gas Hose, AK-2 Tig Accessory Kit, 15-Ft. Work Cable w/Clamp, 15-Ft. Electrode Cable(1)
• 20 Feet Cord And Plug(1)
• 150TB Torch Body, 150VTB Torch Body, 150CE Element Coil, 150SE Element Solid, 105Z55R Handle, Ceriated Tungsten Electrodes (.040, 1/16", 3/32"), 53N20 Wrench, Collet and Collet Body (.040", 1/16", 3/32"), Lava Nozzles (#5, #6), Alumina Nozzles (#4, #5, #6), Back Caps (Short, Medium, Long), (1) 24 (60 Degrees 80 Amp Torch Head), (1) 24-90 (90 Degrees 80 Amp Torch Head), (1) 9-70 (70 Degrees 125 Amp Torch Head), (1) 9-90 (90 Degrees 125 Amp Torch Head), (1) 9P (180 Degrees 125 Amp Torch Head), (1) 1726 (70 Degrees 150 Amp Torch Head), (1) 1726P (180 Degrees 150 Amp Torch Head)"(1)
• 14 Collets: (2) .040, (4) 1/16", (4) 3/32", (2) 1/8"; 8 Collet Bodies: (1) .040", (2) 1/16", (2) 3/32", (2) 1/8"; 4 Gas Lenses: (1) .040", (1) 1/16", (1) 3/32", (1) 1/8"; 4 Back Caps: (1) short, (2) medium, (1) long; 1 Cup Gasket; 4 Back Cap O-Rings; 10 Wire Clamps; 1 Parts Box"(1)
• 12.5 ft. Hose(1)
• 12 1/2 Ft Air Cooled Torch, Torch Accessory Kit, Regulator, Work Clamp With 12 Ft Cable, Dinse Connector(1)
• 11 Collets: (1) .020", (1) .040, (3) 1/16", (3) 3/32", (2) 1/8", (1) 5/32"; 9 Collet Bodies: (1) .020", (1) .040", (2) 1/16", (2) 3/32", (2) 1/8", (1) 5/32"; 5 Gas Lenses: (1) .040", (1) 1/16", (1) 3/32", (1) 1/8", (1) 5/32"; 2 Back Caps: (1) short, (1) long; 2 Cup Gaskets; 1 Gas Lens Insulator; 4 Back Cap O-Rings; 1 Parts Box"(1)
• 1 Short Black Cap, 3 Collets .040", 1/16", 3/32", 3 Collet Bodies .040", 1/16", 3/32", 3 Al. Nozzles 4, 5, 6; 3 Tungsten Electrodes 2% Thoriated .040", 1/16", 3/32" x 7"(1)
• 1 Short Backcap, 3 Collets 3/32", 1/8", 5/32", 2 Collet Bodies 0.020-1/8", 1/8"-3/16", 3 Al. Nozzles (6,7,8); 3 Tungsten Electrodes 2% Ceriated 3/32", 1/8", 5/32"(1)
• 1 Short Back Cap. 3 Collets 1/16", 3/32", 1/8". 3 Collet Bodies 1/16", 3/32", 1/8". 3 Al. Nozzles 5, 6, 8. 3 Tungsten Electrodes 2% Ceriated .1/16", 3/32", 1/8" x 7"(1)
• 1 Short Back Cap, 3 Collets .040", 1/16", 3/32", 3 Collet Bodies .040", 1/16", 3/32", 3 Al. Nozzles 4, 5, 6, 3 Tungsten Electrodes 2% Ceriated .040", 1/16", 3/32" x 7"(1)
• 1 Long lack Cap, 3 Collets (1/16, 3/32", 1/8"), 3 Collet Bodies (1/16", 3/32", 1/8"), 3 Al. Nozzles (5, 6, 7), 3 Tungsten Electrodes 2% Ceriated (1/16", 3/32", 1/8")"(1)
• 1 Long Black Cap, 2 Collets .040", 1/16", 2 Collet Bodies .040", 1/16", 3 Al. Nozzles 4, 5, 6; 2 Tungsten Electrodes 2% Ceriated .040", 1/16" X 7"(1)
• 1 Long Back Cap; 2 Collets .040", 1/16"; 2 Collet Bodies .040", 1/16"; 3 Al. Nozzles 4, 5, 6; 2 Tungsten Electrodes 2% Thoriated .040", 1/16" x 7"(1)
• 1 Long Back Cap, 3 Collets 1/16", 3/32", 1/8", 3 Collet Bodies 1/16", 3/32", 1/8", 3 Al. Nozzles 5, 6, 7, 3 Tungsten Electrodes 2% Ceriated.1/16", 3/32", 1/8" x 7"(1)

Type

• Ring(16)
• Roll(10)
• Gas Lens(5)
• Shim(4)
• Sheet(4)
• Long(3)
• TIG(2)
• Ribbed Thread(2)
• Knurled Thread(2)
• WP-9, 17, 50(1)
• 120V(1)

Diameter

• 0.040" (1.0mm)(6)
• 0.020" (0.5mm)(6)
• 1/16"(5)
• #8 (1/2")(5)
• #7 (7/16")(5)
• #6 (3/8")(5)
• #5 (5/16")(5)
• #4 (1/4")(5)
• 3/32" (2.4mm)(4)
• 3/32"(4)
• 1/8" (3.2mm)(4)
• 1/8"(4)
• 1/16" (1.6mm)(4)
• #10 (5/8")(4)
• 4"(3)
• 2"(3)
• Long, #6 (3/8")(2)
• Long, #4 (1/4")(2)
• GL, Long, #8 (1/2")(2)
• 8"(2)
• 6"(2)
• 5/32" (4.0mm)(2)
• 5"(2)
• 48"(2)
• 44"(2)
• 42"(2)
• 40"(2)
• 36"(2)
• 32"(2)
• 30"(2)
• 3"(2)
• 28"(2)
• 24"(2)
• 22"(2)
• 20"(2)
• 18"(2)
• 16"(2)
• 14"(2)
• 12"(2)
• 10"(2)
• 0.020-0.040"(2)
• #7L (7/16")(2)
• #6L (3/8")(2)
• #5L (5/16")(2)
• #12 (3/4")(2)
• X-Long, #6 (3/8")(1)
• X-Long, #5 (5/16")(1)
• X-Long, #4 (1/4")(1)
• X-Long, #3 (3/16")(1)
• Stubby, 0.040-1/8" (1.0-3.2mm)(1)
• Long, #5 (5/16")(1)
• Long, #3 (3/16")(1)
• LG, Long, #12 (3/4")(1)
• LG, #12 (3/4")(1)
• GL, XX-Long, #12 (3/4")(1)
• GL, XX-Long, #10 (5/8")(1)
• GL, X-Long, #12 (3/4")(1)
• GL, X-Long, #10 (5/8")(1)
• GL, Short, #15 (15/16")(1)
• GL, Short, #11 (11/16")(1)
• GL, Long, #7 (7/16")(1)
• GL, Long, #6 (3/8")(1)
• GL, Long, #5 (5/16")(1)
• GL, Long, #10 (5/8")(1)
• GL, LG, XX-Long, #8 (1/2")(1)
• GL, LG, XX-Long, #6 (3/8")(1)
• GL, LG, X-Long, #8 (1/2")(1)
• GL, LG, X-Long, #6 (3/8")(1)
• GL, LG, Long, #6 (3/8")(1)
• GL, LG, #8 (1/2")(1)
• GL, LG, #6 (3/8")(1)
• GL, #8 (1/2")(1)
• GL, #7 (7/16")(1)
• GL, #6 (3/8")(1)
• GL, #5 (5/16")(1)
• GL, #4 (1/4")(1)
• GL, #10 (5/8")(1)
• 72"(1)
• 7/8"-14 LH(1)
• 64"(1)
• 60"(1)
• 56"(1)
• 52"(1)
• 5/8"-18 RH(1)
• 5/8"-18 LH(1)
• 5/32", (4.0mm)(1)
• 46"(1)
• 38"(1)
• 34"(1)
• 3/32" (2.4mm) GL(1)
• 26"(1)
• 2.5"(1)
• 1/8" (3.2mm) GL(1)
• 1/8 Thick x 3/4"(1)
• 1/8 Thick x 2-1/2"(1)
• 1/8 Thick x 2"(1)
• 1/8 Thick x 1/2"(1)
• 1/8 Thick x 1-3/4"(1)
• 1/8 Thick x 1-1/4"(1)
• 1/8 Thick x 1-1/2"(1)
• 1/8 Thick x 1"(1)
• 1/16" (1.6mm) GL(1)
• 1/16 Thick x 3/4"(1)
• 1/16 Thick x 2"(1)
• 1/16 Thick x 2 1/2"(1)
• 1/16 Thick x 1/2"(1)
• 1/16 Thick x 1"(1)
• 1/16 Thick x 1 3/4"(1)
• 1/16 Thick x 1 1/4"(1)
• 1/16 Thick x 1 1/2"(1)
• 0.040" (1.0mm) GL(1)
• 0.020" (0.5mm) GL(1)
• #4L (1/4")(1)